This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Cooling Loss Reduction of Highly Dispersed Spray Combustion with Restricted In-Cylinder Swirl and Squish Flow in Diesel Engine

Journal Article
2012-01-0689
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 16, 2012 by SAE International in United States
Cooling Loss Reduction of Highly Dispersed Spray Combustion with Restricted In-Cylinder Swirl and Squish Flow in Diesel Engine
Sector:
Citation: Kono, M., Basaki, M., Ito, M., Hashizume, T. et al., "Cooling Loss Reduction of Highly Dispersed Spray Combustion with Restricted In-Cylinder Swirl and Squish Flow in Diesel Engine," SAE Int. J. Engines 5(2):504-515, 2012, https://doi.org/10.4271/2012-01-0689.
Language: English

References

  1. Inagaki, K. Mizuta, J. Fuyuto, T. Hashizume, T. et al. “Low Emissions and High-Efficiency Diesel Combustion Using Highly Dispersed Spray with Restricted In-Cylinder Swirl and Squish Flows,” SAE Int. J. Engines 4 1 2065 2079 2011 10.4271/2011-01-1393
  2. Hashizume, T. Ito, H. Inagaki, K. Kuzuyama, H. “Low Emissions Diesel Combustion using Highly Dispersed Sprays with Restricted In-cylinder Swirl and Squish Flows” Proceedings of the 21st Internal Combustion Engine Symposium (Japan) 503 508 2010
  3. Lee, S. Gonzalez, D., M. Reitz, R. “Effects of Engine Operating Parameters on near Stoichiometric Diesel Combustion Characteristics,” SAE Technical Paper 2007-01-0121 2007 10.4271/2007-01-0121
  4. Hashizume, T. Kawae, T. Kuzuyama, H. Kono, M. Inagaki, K. Tomoda, T. “Low Emissions and High-efficiency Diesel Combustion using Highly Dispersed Sprays with Restricted In-cylinder Swirl and Squish Flows (Second Report)” Transactions of Society of Automotive Engineers of Japan 42 2 439 444 2011
  5. Heywood, J. B. “Internal Combustion Engine Fundamentals” McGraw-Hill, Inc. 674 1988
  6. Furuno, S. Tomoda, T. “Diesel Combustion - Challenge and Future-” Journal of the Combustion Society of Japan 51 155 23 30 2009
  7. Kuboyama, T. Kosaka, H. Aizawa, T. “A Study on Radiant Heat Transfer in Combustion Chamber of DI Diesel Engines” Transactions of the Japan Society of Mechanical Engineers 74 741 1191 1198 2008
  8. Yoshikawa, T. Reitz, R. D. “Effect of Radiation on Diesel Engine Combustion and Heat Transfer” Journal of Thermal Science and Technology 4 1 86 97 2009
  9. Ebersole, G. Myers, P. Uyehara, O. “The Radiant and Convective Components of Diesel Engine Heat Transfer,” SAE Technical Paper 630148 1963 10.4271/630148
  10. Borman, G. L. Nishiwaki, K. “Internal Combustion Engine Heat Transfer” Progress in Energy and Combustion Science 13 1 46 1987
  11. Yamashita, H. Basaki, M. Ogawa, T. Nishida, K. “Research of the Diesel Spray and Combustion Analysis under Swirling Flow” Proceedings of the 48th Symposium (Japanese) on Combustion 230 231 2010
  12. Emi, M. Suzuki, Y. Katsuramaki, T. Sugihara, T. Shimano, K. Enomoto, Y. “Direct Heat Loss to Combustion Chamber Walls in a DI Diesel Engine -States of Heat Loss and Distributions of Heat Flux on All Combustion Chamber Walls -” Transactions of Society of Automotive Engineers of Japan 40 2 355 360 2009
  13. Enomoto, Y. Furuhama, S. “Study on Thin Film Thermocouple Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall in Internal Combustion Engine” Transactions of the Japan Society of Mechanical Engineers, Series B 50 453 1353 1362 1984
  14. Enomoto, Y. Ohya, T. Ishii, M. Enomoto, K. Kitahara, N. “Study on Analysis of Instantaneous Heat Flux flowing into the Combustion Chamber Wall of an Internal Combustion Engine (Expamination in the Coase of Consideration of Heat Storage Term and the Temperature Dependency of the Thermocouple's Thermophysical Properties” Transactions of the Japan Society of Mechanical Engineers, Series B 57 539 2421 2427 1991
  15. Oguri, T. Inaba, S. “Radiant Heat Transfer in Diesel Engines,” SAE Technical Paper 720023 1972 10.4271/720023
  16. Ando, A. Kosuda, T. Sawada, T. Mitani, S. “Heat Flux Measurement of the Combustion Chamber Wall Surface in a Direct Injection Gasoline Engine under Homogeneous and Stratified Injection Operation” Proceedings of JSAE Annual Congress, No.26-07 1 4 2007
  17. Kong, S. Han, Z. Reitz, R. “The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation,” SAE Technical Paper 950278 1995 10.4271/950278
  18. Kleemann, A. P. Gosman, A. D. Binder, K. B. “Heat Transfer in Diesel Engines : A CFD Evaluation Study” The 5th International Symposium on Diagnostics and Modeding of Combustion in Internal Combustion Engines (COMODIA) 123 131 2001
  19. Reitz, R. Diwakar, R. “Effect of Drop Breakup on Fuel Sprays,” SAE Technical Paper 860469 1986 10.4271/860469
  20. Kong, S. Han, Z. Reitz, R. “The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation,” SAE Technical Paper 950278 1995 10.4271/950278

Cited By