This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effects of Injection Pressure, Injection-Rate Shape, and Heat Release on Liquid Length
Journal Article
2012-01-0463
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Topic:
Citation:
Fisher, B. and Mueller, C., "Effects of Injection Pressure, Injection-Rate Shape, and Heat Release on Liquid Length," SAE Int. J. Engines 5(2):415-429, 2012, https://doi.org/10.4271/2012-01-0463.
Language:
English
References
- Mueller, C. Martin, G. Briggs, T. Duffy, K. “An Experimental Investigation of In-Cylinder Processes Under Dual-Injection Conditions in a DI Diesel Engine,” SAE Technical Paper 2004-01-1843 2004 10.4271/2004-01-1843
- Kashdan, J. Mendez, S. Bruneaux, G. “On the Origin of Unburned Hydrocarbon Emissions in a Wall Guided, Low NOx Diesel Combustion System,” SAE Technical Paper 2007-01-1836 2007 10.4271/2007-01-1836
- Opat, R. Ra, Y. Gonzalez, D., M. Krieger, R. et al. “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine,” SAE Technical Paper 2007-01-0193 2007 10.4271/2007-01-0193
- Martin, G. Mueller, C. Milam, D. Radovanovic, M. et al. “Early Direct-Injection, Low-Temperature Combustion of Diesel Fuel in an Optical Engine Utilizing a 15-Hole, Dual-Row, Narrow-Included-Angle Nozzle,” SAE Int. J. Engines 1 1 1057 1082 2009 10.4271/2008-01-2400
- Takeda, Y. Keiichi, N. Keiichi, N. “Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection,” SAE Technical Paper 961163 1996 10.4271/961163
- Drake, M. Fansler, T. Solomon, A. Szekely, G. “Piston Fuel Films as a Source of Smoke and Hydrocarbon Emissions from a Wall-Controlled Spark-Ignited Direct-Injection Engine,” SAE Technical Paper 2003-01-0547 2003 10.4271/2003-01-0547
- Hardy, W. Reitz, R. “A Study of the Effects of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion,” SAE Technical Paper 2006-01-0026 2006 10.4271/2006-01-0026
- Fang, H. Alleman, T. McCormick, R. “Quantification of Biodiesel Content in Fuels and Lubricants by FTIR and NMR Spectroscopy,” SAE Technical Paper 2006-01-3301 2006 10.4271/2006-01-3301
- Andreae, M. Fang, H. Bhandary, K. “Biodiesel and Fuel Dilution of Engine Oil,” SAE Technical Paper 2007-01-4036 2007 10.4271/2007-01-4036
- Fang, H. Whitacre, S. Yamaguchi, E. Boons, M. “Biodiesel Impact on Wear Protection of Engine Oils,” SAE Technical Paper 2007-01-4141 2007 10.4271/2007-01-4141
- Devlin, C. Passut, C. Campbell, R. Jao, T. “Biodiesel Fuel Effect on Diesel Engine Lubrication,” SAE Technical Paper 2008-01-2375 2008 10.4271/2008-01-2375
- Thornton, M. Alleman, T. Luecke, J. McCormick, R. “Impacts of Biodiesel Fuel Blends Oil Dilution on Light-Duty Diesel Engine Operation,” SAE Int. J. Fuels Lubr 2 1 781 788 2009 10.4271/2009-01-1790
- Fang, T. Coverdill, R. Lee, C. White, R. “Smokeless Combustion within a Small-Bore HSDI Diesel Engine Using a Narrow Angle Injector,” SAE Technical Paper 2007-01-0203 2007 10.4271/2007-01-0203
- Yokota, H. Kudo, Y. Nakajima, H. Kakegawa, T. et al. “A New Concept for Low Emission Diesel Combustion,” SAE Technical Paper 970891 1997 10.4271/970891
- Klingbeil, A. Juneja, H. Ra, Y. Reitz, R. “Premixed Diesel Combustion Analysis in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2003-01-0341 2003 10.4271/2003-01-0341
- Kanda, T. Hakozaki, T. Uchimoto, T. Hatano, J. et al. “PCCI Operation with Early Injection of Conventional Diesel Fuel,” SAE Technical Paper 2005-01-0378 2005 10.4271/2005-01-0378
- Kook, S. Bae, C. Miles, P. Choi, D. et al. “The Influence of Charge Dilution and Injection Timing on Low-Temperature Diesel Combustion and Emissions,” SAE Technical Paper 2005-01-3837 2005 10.4271/2005-01-3837
- Lechner, G. Jacobs, T. Chryssakis, C. Assanis, D. et al. “Evaluation of a Narrow Spray Cone Angle, Advanced Injection Timing Strategy to Achieve Partially Premixed Compression Ignition Combustion in a Diesel Engine,” SAE Technical Paper 2005-01-0167 2005 10.4271/2005-01-0167
- Minato, A. Tanaka, T. Nishimura, T. “Investigation of Premixed Lean Diesel Combustion with Ultra High Pressure Injection,” SAE Technical Paper 2005-01-0914 2005 10.4271/2005-01-0914
- Musculus, M. “Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2006-01-0079 2006 10.4271/2006-01-0079
- Huestis, E. Erickson, P. Musculus, M. “In-Cylinder and Exhaust Soot in Low-Temperature Combustion Using a Wide-Range of EGR in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2007-01-4017 2007 10.4271/2007-01-4017
- Genzale, C. Reitz, R. Musculus, M. “Effects of Piston Bowl Geometry on Mixture Development and Late-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Int. J. Engines 1 1 913 937 2009 10.4271/2008-01-1330
- Naber, J. Siebers, D. “Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays,” SAE Technical Paper 960034 1996 10.4271/960034
- Siebers, D. “Liquid-Phase Fuel Penetration in Diesel Sprays,” SAE Technical Paper 980809 1998 10.4271/980809
- Higgins, B. Mueller, C. Siebers, D. “Measurements of Fuel Effects on Liquid-Phase Penetration in DI Sprays1,” SAE Technical Paper 1999-01-0519 1999 10.4271/1999-01-0519
- Myong, K. Arai, M. Suzuki, H. Senda, J. et al. “Vaporization Characteristics and Liquid-Phase Penetration for Multi-Component Fuels,” SAE Technical Paper 2004-01-0529 2004 10.4271/2004-01-0529
- Desantes, J.M. Payri, R. Pastor, J.M. Gimeno, J. “Experimental Characterization of Internal Nozzle Flow and Diesel Spray Behavior. Part I: Nonevaporative Conditions,” Atomization and Sprays 15 5 489 516 2005
- Desantes, J. Payri, R. Salvador, F. Gimeno, J. “Prediction of Spray Penetration by Means of Spray Momentum Flux,” SAE Technical Paper 2006-01-1387 2006 10.4271/2006-01-1387
- Jeong, H. Lee, K. Ikeda, Y. “Investigation of the Spray Characteristics for a Secondary Fuel Injection Nozzle Using a Digital Image Processing Method,” Measurement Science and Technology 18 5 1591 1602 2007
- Payri, R. Salvador, F.J. Gimeno, J. Zapata, L.D. “Diesel Nozzle Geometry Influence on Spray Liquid-Phase Fuel Penetration in Evaporative Conditions,” Fuel 87 7 1165 1176 2008
- Pickett, L. Kook, S. Williams, T. “Transient Liquid Penetration of Early-Injection Diesel Sprays,” SAE Int. J. Engines 2 1 785 804 2009 10.4271/2009-01-0839
- Pickett, L. Kook, S. Williams, T. “Visualization of Diesel Spray Penetration, Cool-Flame, Ignition, High-Temperature Combustion, and Soot Formation Using High-Speed Imaging,” SAE Int. J. Engines 2 1 439 459 2009 10.4271/2009-01-0658
- Espey, C. Dec, J. “The Effect of TDC Temperature and Density on the Liquid-Phase Fuel Penetration in a D. I. Diesel Engine,” SAE Technical Paper 952456 1995 10.4271/952456
- Ricart, L. Xin, J. Bower, G. Reitz, R. “In-Cylinder Measurement and Modeling of Liquid Fuel Spray Penetration in a Heavy-Duty Diesel Engine,” SAE Technical Paper 971591 1997 10.4271/971591
- Zhang, L. Tsurushima, T. Ueda, T. Ishii, Y. et al. “Measurement of Liquid Phase Penetration of vaporating Spray in a DI Diesel Engine,” SAE Technical Paper 971645 1997 10.4271/971645
- Canaan, R. Dec, J. Green, R. Daly, D. “The Influence of Fuel Volatility on the Liquid-Phase Fuel Penetration in a Heavy-Duty D.I. Diesel Engine,” SAE Technical Paper 980510 1998 10.4271/980510
- Wang, T. Han, J. Xie, X. Lai, M. et al. “Direct Visualization of High Pressure Diesel Spray and Engine Combustion,” SAE Technical Paper 1999-01-3496 1999 10.4271/1999-01-3496
- Desantes, J.M. Pastor, J.V. Payri, R. Pastor, J.M. “Experimental Characterization of Internal Nozzle Flow and Diesel Spray Behavior. Part II: Evaporative Conditions,” Atomization and Sprays 15 5 517 543 2005
- Desantes, J. Pastor, J. Martínez, S. Riesco, J. “Experimental Characterization of the Liquid Phase Penetration on Evaporating Diesel Sprays,” SAE Technical Paper 2005-01-2095 2005 10.4271/2005-01-2095
- Martinez-Martinez, S. Sanchez-Cruz, F.A. Riesco-Avila, J.M. Gallegos-Munoz, A. Aceves, S.M. “Liquid Penetration Length in Direct Diesel Fuel Injection,” Applied Thermal Engineering 28 14-15 1756 1762 2008
- Ochoterena, R. Larsson, M. Andersson, S. Denbratt, I. “Optical Studies of Spray Development and Combustion Characterization of Oxygenated and Fischer-Tropsch Fuels,” SAE Technical Paper 2008-01-1393 2008 10.4271/2008-01-1393
- Siebers, D. “Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization,” SAE Technical Paper 1999-01-0528 1999 10.4271/1999-01-0528
- Fisher, B.T. Mueller, C.J. “Liquid Penetration Length of Heptamethylnonane and Trimethylpentane under Unsteady In-Cylinder Conditions,” Fuel 89 10 2673 2696 2010
- Fisher, B.T. Knothe, G. Mueller, C.J. “Liquid-Phase Penetration under Unsteady In-Cylinder Conditions: Soy- and Cuphea-Derived Biodiesel Fuels Versus Conventional Diesel,” Energy and Fuels 24 9 5163 5180 2010
- Kempenaar, J.G. Mueller, C.J. Shollenberger, K.A. “An Instrument for Measuring Orifice-Specific Fuel-Injection Rate from a Multi-Orifice Nozzle (FEDSM2008-55047).” Fluids Engineering Division Summer Meeting Jacksonville, FL Aug. 2008 American Society of Mechanical Engineers 305 312 2008
- Murphy, M.J. Taylor, J.D. McCormick, R.L. “Compendium of Experimental Cetane Number Data,” National Renewable Energy Laboratory Report: NREL/SR-540-36805 2004
- “Diesel 2007 ULSD (7-15 ppm) Certification Fuel,” Chevron Phillips Chemical Company Sept. 24 2008 http://www.cpchem.com/enu/tds_unsecured/Diesel_2007_ULSD.pdf Mar. 31 2010
- Mueller, C. Martin, G. “Effects of Oxygenated Compounds on Combustion and Soot Evolution in a DI Diesel Engine:Broadband Natural Luminosity Imaging,” SAE Technical Paper 2002-01-1631 2002 10.4271/2002-01-1631
- Mueller, C. Musculus, M. “Glow Plug Assisted Ignition and Combustion of Methanol in an Optical DI Diesel Engine,” SAE Technical Paper 2001-01-2004 2001 10.4271/2001-01-2004
- Physical and Thermodynamic Properties of Pure Chemicals Daubert, T.E. Danner, R.P. Sibul, H.M. Stebbins, C.C. Rowley, R.L. Wilding, W.V. Oscarson, J.L. Adams, M.E. Marshall, T.L. Zundel, N.A. Taylor and Francis New York 2001 http://dippr.byu.edu/ Feb. 27 2009
- Genzale, C. Pickett, L. Kook, S. “Liquid Penetration of Diesel and Biodiesel Sprays at Late-Cycle Post-Injection Conditions,” SAE Int. J. Engines 3 1 479 495 2010 10.4271/2010-01-0610