This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Comparison of Quantitative In-Cylinder Equivalence Ratio Measurements with CFD Predictions for a Light Duty Low Temperature Combustion Diesel Engine

Journal Article
2012-01-0143
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 16, 2012 by SAE International in United States
Comparison of Quantitative In-Cylinder Equivalence Ratio Measurements with CFD Predictions for a Light Duty Low Temperature Combustion Diesel Engine
Sector:
Citation: Dempsey, A., Wang, B., Reitz, R., Petersen, B. et al., "Comparison of Quantitative In-Cylinder Equivalence Ratio Measurements with CFD Predictions for a Light Duty Low Temperature Combustion Diesel Engine," SAE Int. J. Engines 5(2):162-184, 2012, https://doi.org/10.4271/2012-01-0143.
Language: English

References

  1. Tsurushima, T. Kunishima, E. Asaumi, Y. Aoyagi, Y. “The Effect of Knock on Heat Loss in Homogeneous Charge Compression Ignition Engines,” SAE Technical Paper 2002-01-0108 2002 10.4271/2002-01-0108
  2. Noehre, C. Andersson, M. Johansson, B. Hultqvist, A. “Characterization of Partially Premixed Combustion,” SAE Technical Paper 2006-01-3412 2006 10.4271/2006-01-3412
  3. Ekoto, I. Colban, W. Miles, P. Park, S. et al. “UHC and CO Emissions from a Light-Duty Diesel Engine Undergoing Dilution-Controlled Low-Temperature Combustion,” SAE Int. J. Engines 2 2 411 430 2010 10.4271/2009-24-0043
  4. Musculus, M. Lachaux, T. Pickett, L. M. Idicheria, C. A. “End-of-Injection Over-Mixing and Unburned Hydrocarbon Emissions in Low Temperature Combustion Diesel Engines,” SAE Technical Paper 2007-01-0907 2007 10.4271/2007-01-0907
  5. Kim, D. Ekoto, I. W. Colban, W. F. Miles, P. C. “In-cylinder CO and UHC Imaging in a Light-Duty Diesel Engine during PPCI Low-Temperature Combustion,” SAE Int. J. Fuels Lubr. 1 1 933 956 2009 10.4271/2008-01-1602
  6. Sahoo, D. Petersen, B. Miles, P. C. “Measurement of Equivalence Ratio in a Light-Duty Low Temperature Combustion Diesel Engine by Planar Laser Induced Fluorescence of a Fuel Tracer,” SAE Int. J. Engines 4 2 2312 2325 2011 10.4271/2011-24-0064
  7. Petersen, B. Ekoto, I. W. Miles, P. C. “An Investigation into the Effects of Fuel Properties and Engine Load on UHC and CO Emissions from a Light-Duty Optical Diesel Engine Operating in a Partially Premixed Combustion Regime,” SAE Int. J. Engines 3 2 38 55 2010 10.4271/2010-01-1470
  8. Amsden, A. A. O'Rourke, P. J. Butler, T. D. KIVA-II - A computer program for chemically reactive flows with sprays 1989 Los Alamos National Laboratory Report LA-11560-MS
  9. Amsden, A. A. KIVA-3V: A block-structured KIVA program for engines with vertical or canted valves 1997 Los Alamos National Laboratory Report LA-13313-MS
  10. Amsden, A. A. KIVA-3V, Release 2, improvements to KIVA-3V 1999 Los Alamos National Laboratory Report LA-UR-99-915
  11. Beale, J. C. Reitz, R. D. Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor hybrid model Atomization and Sprays 1999 9 623 650
  12. Baumgarten, C. Mixture Formation in Internal Combustion Engines 2006 Springer 116
  13. Abani, N. Munnannur, A. Reitz, R. D. Reduction of Numerical Parameter Dependencies in Diesel Spray Models Journal of Engineering for Gas Turbines and Power 2008 130 032809
  14. O'Rourke, P. J. Amsden, A. A. “A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model,” SAE Technical Paper 2000-01-0271 2000 10.4271/2000-01-0271
  15. Ra, Y. Reitz, R. D. A vaporization model for discrete multi-component fuel sprays International Journal of Multiphase Flow 2009 35 101 117
  16. Han, Z. Reitz, R. D. Turbulence Modeling of Internal Combustion Engines Using RNG k-e Models Combustion Science and Technology 1995 106 267 295
  17. Sauter, J. W. Lee, C. W. Ra, Y. Reitz, R. D. “Model Parameter Sensitivity of Mixing and UHC/CO Emissions in a PPCI, Low-Load Optical Diesel Engine,” SAE Technical Paper 2011-01-0844 2011 10.4271/2011-01-0844
  18. Wang, B.-L. Bergin, M. J. Petersen, B. R. Miles, P. C. Reitz, R. D. Han, Z. “Validation of the Generalized RNG Turbulence Model and Its Application to Flows in HSDI Diesel Engine,” SAE Technical Paper 2012-01-0140 2012 10.4271/2012-01-0140
  19. Arai, M. Amagai, K. Ebara, T. “Attitude Control of a Diesel Spray under the Coanda Effect,” SAE Technical Paper 941923 1994 10.4271/941923
  20. Petersen, B. R. Miles, P. C. “PIV Measurements in the Swirl-Plane of a Motored Light-Duty Diesel Engine,” SAE Int J.Engines 4 1 : 1623 1641 2011 10.4271/2011-01-1285

Cited By