This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
FENSAP-ICE: Numerical Prediction of Ice Roughness Evolution, and its Effects on Ice Shapes
Technical Paper
2011-38-0024
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Numerically predicted roughness distributions obtained in in-flight icing simulations with a beading model are used in a quasi-steady manner to compute ice shapes. This approach, called "Multishot," uses a number of steady flow and droplet solutions for computing short intervals (shots) of the total ice accretion time. The iced geometry, the grid, and the surface roughness distribution are updated after each shot, producing a better match with the unsteady ice accretion phenomena. Comparisons to multishot results with uniform roughness show that the evolution of the surface roughness distribution has a strong influence on the final ice shape. The ice horns that form are longer and thinner compared to constant roughness results. The constant roughness approach usually fails to capture the formation of the pressure side horns and under-predicts the thickness of the ice in this region. With the variable roughness produced by the beading model, the ice shape in general is captured more accurately, better matching the experimental ice shapes. Results are provided for NACA 0012 and SC 1095 airfoils for 2D icing. The flow conditions range between Mach numbers of 0.3 to 0.6, free stream static temperatures of -27°C to -6°C, free stream liquid water contents of 0.5 g/m₃ to 1.4 g/m₃, Reynolds numbers of 2.6 to 4.4 million, and droplet diameter of 20 microns. Total ice accretion times range between 45 seconds to 7 minutes. The FENSAP-ICE icing simulation system is utilized to carry out the CFD-Icing calculations in 2D and 3D.
Recommended Content
Authors
Citation
Ozcer, I., Baruzzi, G., Reid, T., Habashi, W. et al., "FENSAP-ICE: Numerical Prediction of Ice Roughness Evolution, and its Effects on Ice Shapes," SAE Technical Paper 2011-38-0024, 2011, https://doi.org/10.4271/2011-38-0024.Also In
References
- Olsen, W. Walker, E. Experimental Evidence For Modifying The Current Physical Model For Ice Accretion on Aircraft Surfaces NASA TM 87184 May 1986
- Anderson, D. N. Hentschel, D. B. Ruff, G. A. Measurement and Correlation of Ice Accretion Roughness NASA CR 2003-211823 June 2003
- Croce, G. De Candido, E. Habashi, W. G. Aubé, M. S. Baruzzi, G. S. FENSAP-ICE: Numerical Prediction of In-Flight Icing Roughness Evolution AIAA-2009-4126, 19th AIAA Computational Fluid Dynamics San Antonio, Texas June 22 25 2009
- Bourgault, Y. Beaugendre, H. Habashi, W. G. Development of a Shallow-Water-Icing-Model in FENSAP-ICE Journal of Aircraft 37 4 2000
- El Sherbini, A. I. Jacobi, A. M. Retention Forces and Contact Angles for Critical Liquid Drops on Non-Horizontal Surfaces J. Colloid and Interface Science 299 2006
- Dussin, D. Fossati, M. Guardone, A. Vigevano, L. Hybrid Grid Generation for two-dimensional high-Reynolds number Flows Computers & Fluids 38 2009 1863 1875
- NASA Ice Shape Database 1991-2005, DVD
- Flemming, R. J. Lednicer, D. A. High Speed Ice Accretion on Rotorcraft Airfoils NASA Contractor Report 3910 1985