This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Control Oriented Model Development for a Gas Control Path with a Stepper Motor-Based Actuator for a Gas Engine
Technical Paper
2011-32-0626
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In today's automotive power train control, the usage of model based control system is getting more focused because of the advantages associated with this approach. The model-based system can be implemented to predict and control different control parameters associated with Power train control.
As a part of this work a multivariable control oriented model is developed to control the inlet manifold airflow of a small S.I. engine running on Gas. A stepper motor-based actuator is placed on the gas flow control path. A model based controller approach is adopted to control the actuator, which is placed on the low-pressure tube with inlet manifold to control the gas flow.
In the initial phase of work, a state based non-linear model is developed for the actuator. This model captures the total dynamics of a permanent magnet stepper motor-based flow control device in a state space model. Different parameters for the model are calculated using system identification methodology.
In the second phase of work, a mean value model for inlet manifold is developed. In this model, the above-mentioned actuator is placed on an addition to the carburetor for the manifold airflow path. The manifold air pressure (MAP) and manifold airflow (MAF) are identified as the main control variable for this work. The stepper motor position is the control signal for the above-mentioned multivariable system. The non-linear model proposed in the previous section provides the position feedback for the controller.
Authors
Topic
Citation
Das, H., Kavitha, K., Padhi, L., Srikanth, K. et al., "A Control Oriented Model Development for a Gas Control Path with a Stepper Motor-Based Actuator for a Gas Engine," SAE Technical Paper 2011-32-0626, 2011.Also In
References
- Acarnley, P.P. Stepping motors: A Guide to Modern theory and practices Stevenrage, UK P. Peregrinus Ltd 1982
- Kuo, B C Tal, J Incremental Motion Control, step motors and control systems II Champaign IL SRL Publishing 1978
- Nonlinear Speed Observer for PM Stepper motor Chiasson, John N Novotnak, Robert T IEEE transactions on Automatic Control 38 10 October 1993
- A Passivity plus flatness controller for the PM stepper motor Sira-Ramirez, Hebertt Asian Journal of Control 2 1 9 March 2000
- High speed Parameter estimation of Stepper motor Blauch, Andrew J Bodson, Marc Chiasson, John N IEEE transactions on Automatic Control 1 4 December 1993
- Parameter identification of a PM stepper motor Schuerer, D MSc thesis University of Pittsburg 1990
- Linear modeling, simulation and experimental verification of a pressure regulator for CNG injection system Hubner, Drik Harald Ortwig Trier University of applied science
- Modeling of LP gas Single stage Pressure Regulator and simulation of the behavior of a deteriorated diaphragm Ishigaki, T Watanabe, K SICE Annual Conference in Sapparo August 4 6 2004 Hokkaido Institute of Technology Japan