This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Investigating the Effect of Operating Variables and Engine Lubricant Viscosity on Engine Friction- A DOE Approach
Technical Paper
2011-28-0052
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Engine components are exposed to various lubrication regimes such as hydrodynamic, elasto-hydrodynamic, boundary and mixed lubrication during engine operation. In each of these regimes, the factors which influence engine friction are different. Hydrodynamic friction is influenced by lubricant rheology, film thickness and sliding speed of interacting surfaces, whereas boundary and elasto-hydrodynamic friction is a function of surface properties like roughness and hardness and the type of friction modifier used in engine lubricant. So the principal factors which influence engine friction power are speed, load, surface topography of engine components, oil viscosity, oil temperature and type of friction modifiers used. Experimental studies on an off-highway diesel engine were conducted to investigate the effect of engine oil viscosity and engine operating conditions on engine friction power. A full factorial design of experiments (DOE) was formulated to analyze some of the important parameters by which engine friction power influenced significantly. Three factors; speed, load and oil viscosity were chosen as variables with each factor having two levels. Statistical analysis of the test results revealed that the engine speed and speed-load combination are the most significant factors on which engine friction is strongly influenced. Also it has been observed that there is reduction in engine friction power at high speed when lower viscosity grade engine oil was used instead of the recommended viscosity grade engine oil.
Recommended Content
Authors
Topic
Citation
Singh, D., Fieldhouse, J., Jain, A., Tyagi, M. et al., "Investigating the Effect of Operating Variables and Engine Lubricant Viscosity on Engine Friction- A DOE Approach," SAE Technical Paper 2011-28-0052, 2011, https://doi.org/10.4271/2011-28-0052.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Fenske, George “Impact of Friction Reduction Technologies on Fuel Economy” Chicago chapter meeting of the STLE March 2009
- Taylor, C.M 1993 “Engine Tribology,” Elsvier Science Publishers
- Bovington, C. Korcek, S. Sorab, J. “The importance of the stribeck curve in the minimisation of engine friction” Tribology 1999 205 214
- Hoshi, M. “Reducing friction losses in automobile engines” Tribol. Int 1984 17 185 189
- Singh, D. Singh, N. Jain, A.K. Chibber, V.K. Saxena, Mukesh “Effect of Engine Oil Viscosity on Fuel Economy” 5th International Conference on Industrial Tribology-06 Indian Institute of Science Bangalore 2006
- Taylor, R I “Engine friction: the influence of lubricant Rheology” Proc Instn Mech Engrs 211 1997
- Mufti, R. A Priest, M “Effect of Engine Operating Conditions and Lubricant Rheology on the Distribution of Losses in an Internal Combustion Engine J. Tribol October 2009 131 4
- Kellaci, A. Mazouzi, R. Khelidj, B. Bounif, A. “The effect of lubricant rheology on piston skirt/cylinder contact for an internal combustion engine” 1392-1207 MECHANIKA 2010 1(81)
- Roshan, R Priest, M Neville, A Morina, A Xia, X Green, JH Warrens, C P Payne, MJ “Friction modelling of tribofilm performance in a bench tribometer for automotive engine lubricants” Proc. IMechE 222 J. Engineering Tribology 2008
- Record, Jonathan H. “statistical investigation of friction stir Processing parameter relationships” MS Thesis Department of Mechanical Engineering Brigham Young University April 2005