This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development Process of the Prototype and Evaluation on the Biodegradability of Jute Fiber/PLA Fiber Composites for Automotive Headlining
Technical Paper
2011-28-0007
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Biodegradable headlinings were developed using jute fiber, PLA (polylactic acid) fiber. More specifically, the main felt which consists of jute fibers and PLA fibers was produced by carding process, and then laminating PLA Films or light PLA felts as reinforcement. After lamination, cotton nonwovens were used as skin layers. Evaluation on the biodegradation of headlinings was tested under conditions (KS M 3100-1 and ISO-14855-1) of aerobic biodegradation. The test results of biodegradable headlinings showed a reduction of weight by 48 % and a decrease of mechanical strength by 90% for the biodegradation period. This feature would be attributed to the decomposition of the bio-materials during its biodegradation.
Authors
Citation
Jeoung, S., Lee, P., Yoo, S., Lee, K. et al., "Development Process of the Prototype and Evaluation on the Biodegradability of Jute Fiber/PLA Fiber Composites for Automotive Headlining," SAE Technical Paper 2011-28-0007, 2011, https://doi.org/10.4271/2011-28-0007.Also In
References
- Silva, R. V. Spinelli, D. Bose Filho, W. W. Neto, S. C. Chierice, G. O. Tarpani, J. R. Compos. Sci. Tech. 66 1328 2006
- Lee, H. S. Cho, D. Han, S. O. Macromol. Res. 16 5 411 2008
- Ernst, T. Popp, R. Eldik, R. V. Talanta 53 2 347 2000
- Li, C. T. Zhuang, H. K. Hsieh, L. T. Lee, W. J. Taso, M. C. Environment Int., 27 1 61 2001
- Hwang, K.-J. Park, J.-W. Kim, I. Kim, G.-H. Ha, C.-S. Macromol. Res. 14 2 179 2006
- Jun, C. L. J. Polymer. Environ. 18 1 33 2000
- Liu, L. Yu, J. Cheng, L. Yang, X. Polym. Degrad. Stab. 94 1 90 2009
- Vazquez, A. Alvarez, V. A. Biodegradable Polymer Blends and composites from Renewable resources Yu, L. John Wiley & Sons, Inc. New Jersey 2009 242 279
- Colin, G. Cooney, J. D. Carlsson, D. J. Wiles, D. M. J. Appl. Polym. Sci. 26 2 509 1995
- ASTM D5247-92 “Standard Test Method for Determining the Aerobic Biodegradability of Degradable Plastic by Specific Microorganisms” Annual Book of ASTM Standard Vol. 08-03 American Society for Testing and Materials Philadelphia, U.S.A 1992
- Fields, R. D. Rodirguez, P. Finn, R. K. J. Appl. Polym. Sci. 18 12 3571 1974
- ASTM D5338-92 “Standard Test Method for Determining the Aerobic Biodegradation of Plastics Materials Under Controlled Composting Condition” Annual Book of ASTM Standard Vol. 08-03 American Society for Testing and Materials Philadelphia, U.S.A. 1992
- Johnson, K. E. Pometto, A. L. III Nikolov, Z. Appl. Environ. Microbiol. 59 4 1155 1993
- KS M 3100-1 2002 “Determination of the Ultimate Aerobic Biodegradability and Disintegration of Plastic Materials Under Controlled Composting Conditions-Part 1: Analysis of Evolved Carbon Dioxide by Titration Method,” Seoul, Korea 2002
- International Standard ISO 14855 1999(E) “Determination of the Ultimate Aerobic Biodegradability and Disintegration of Plastic Materials Under Controlled Composting Conditions - Method by Analysis of Evolved Carbon Dioxide,” Geneva, Switzerland 1999
- ASTM D5210-91 “Standard Test Method for Determining the Anaerobic Biodegradation of Platics Materials in the Presence of Muncipal Sewage Sludge” Annual Book of ASTM Standard Vol. 08-03 American Society for Testing and Materials Philadelphia, U.S.A. 1991
- ASTM D 5271-93 “Standard Test Method for Determining the aerobic Biodegradation of Plastic Materials in an Activated-sludge-wastewater-treatment system” Annual Book of ASTM Standard Vol. 08-03 American Society for Testing and Materials Philadelphia, U.S.A. 1993