This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Stress Measurement Techniques for Quantification of Stresses using X Ray Diffraction
Technical Paper
2011-26-0056
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SIAT 2011
Language:
English
Abstract
Accurate quantification of residual stresses is critical to predict expected fatigue life of the component. Quantification of residual stresses by X ray diffraction method offers substantial accuracy in results as compared to other methods of stress measurements. Depending on component processing and geometry, various stress measurement techniques are used to analyze stress patterns induced by these processing. This paper describes some of the stress measurement techniques by results obtained on two compressor valve (reed) samples which are undergone different processing. First reed sample is analyzed after blanking operation which is expected to give low compressive or tensile stresses whereas second reed sample is analyzed after tumbling operation which is done to get high compressive stresses. Results of analysis showed high compressive residual stresses with less stress variation on tumbled reed sample as compared to blanked reed sample, indicating more favourable distribution of compressive residual stresses after tumbling process.
Citation
Deshmukh, P. and Satish, B., "Stress Measurement Techniques for Quantification of Stresses using X Ray Diffraction," SAE Technical Paper 2011-26-0056, 2011, https://doi.org/10.4271/2011-26-0056.Also In
References
- SAE J783 “Influence of Residual Stress on Fatigue of Steel” Handbook Supplement TR-198; Morrow, JoDean Milan, J. F. 1962 1 17
- Cammelt, J T Prevey, P S Jayaraman, N “The Effect of Shot Peening Coverage on Residual Stress, Cold Work and Fatigue in a Nickel-Base Superalloy” Proc. ICSP 9 (Paper 261) Paris, Mame la Vallee, France Sept. 2005
- Dorr, T Wagner, L “Effect of Shot Peening on Residual Life of Fatigue Pre-Damaged 2024 Al” Proc. ICSP 6 1996 174 183
- Jiang, Su Quing et al. “Predication on Residual Stress and Fatigue Life of Magnesium Alloy Treated by Laser Shot Peening” Materials Science Forum 626-627 393 398
- Benedetti, M et al. “Influence of Residual Stresses on Fatigue Behaviour of Surface Treated Gears” XXX Convegno Nazionale AIAS - Alghero (SS) 12-15 Sept 2001 263 272
- Takahashi, Shigenobu Hashimoto, Munetoh Hirose, Yukio “An X-Ray Study of Shot Peening Material During Fatigue” Copyright(c)JCPDS-International Centre for Diffraction Data 2000, Advances in X-ray Analysis 43 117 122
- Cláudio, R A et al. “Fatigue Life Prediction of Shot Peened Components” Ciência e Tecnologia dos Materiais 20 ½ 2008 99 105
- Onizawa, A et al. “Fatigue Properties of Smooth And as-Shot Peened N Bearing Austenitic Stainless Steel Under Tension-Tension Condition” ARPN Journal of Engineering and Applied Sciences 1 1 June 2006 12 21
- Aggarwal, M A Khan, R A Aggarwal, V P “Influence of Shot Peening Intensity on Fatigue Design Reliability of 65Si7 Spring Steel” Indian journal of engineering & material sciences 12 December 2005 515 520
- Deshmukh, Prasanna et al. “Development Team Gala Precision Engineering India, “Effect of Residual Stresses on Fatigue Life Performance of Hot Forged Disc Springs” Paper Proceedings of 3 rd Asia Forge Meeting September 12-16 2010 Shanghai, China 87 94
- Prevéy, Paul S., lambda research “X-ray diffraction characterization of residual stresses produced by shot peening” Shot Peening Theory and Application, series Niku-Lari, A. IITT-International Gournay-Sur-Marne, France 1990 81 93
- Kanchanomai, C Limtrakarn, W “Effect of Residual Stress on Fatigue Failure of Carbonitrided Low-Carbon Steel” Journal of Materials Engineering and Performance 17 6 December 2008 879 887
- Dennis, P Townsend Zaretsky, Erwin V “Effect of Shot Peening on SurfaceFatigue Life of Curbutized and Hardened AISI 9310 Spur Gears” The Shot Peener Fall 2002 5 12