This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Visualization of the Cavitating Flow inside the Nozzle Hole Using by Enlarged Acrylic Nozzle
Technical Paper
2011-01-2062
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this study, it is purpose to make clear the effect of cavitation phenomenon on the spray atomization. In this report, the cavitation phenomenon inside the nozzle hole was visualized and the pressure measurements along the wall of the nozzle hole were carried out by use of 25-times enlarged acrylic nozzle. For the representatives of regular gasoline, single and two-component fuels were used as a test fuel. In addition, various cavitating flow patterns same as experimental conditions were simulated by use of Barotropic model incorporated in commercial code of Star-CD scheme, and compared with experimental results.
Authors
Citation
Matsumoto, M., Inoue, Y., Matsumura, E., Kobashi, Y. et al., "Visualization of the Cavitating Flow inside the Nozzle Hole Using by Enlarged Acrylic Nozzle," SAE Technical Paper 2011-01-2062, 2011, https://doi.org/10.4271/2011-01-2062.Also In
References
- Nurick, W. H. “Orifice Cavitation and Its Effect on Spray Mixing” Transactions of ASME, Journal of Fluids Engineering 98 681 687 1976
- Soteriou, C. Andrews, R. Smith, M. “Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization” SAE Paper No. 950080 1995
- Sou, A. Hosokawa, S. Tomiyama, A. “Effects of cavitation in a Nozzle on Liquid Jet Atomization” International Journal of Heat & Transfer 50 17-18 3575 3582 2007
- Chaves, H. Knapp, M. Kubitzek, A. Obermeier, F. Sxhneider, T. “Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles” SAE Paper No. 950290 1995
- Arcoumanis, C. Badami, M. Flowa, H. Gavaises, M. “Cavitation in Real-Size Multi-Hole Diesel Injector Nozzles” SAE Paper No. 2000-01-1249 2000
- Serras-Pereira, J. van Romunde, Z. Aleiferis, P. G. Richardson, D. Wallace, S. Cracknell, R. F. “Cavitation, primary break-up and flash boiling of gasoline, iso -octane and n -pentane with a real-size optical direct-injection nozzle” Fuel 89 2592 2607 2010
- Huh, K. Y. Gosman, A. D. “A Phenomenological Model of Diesel Spray Atomization” Proc. The International Conf. Multiphase Flows 515 518 1991
- Arcoumanis, C. Gavaises, M. “Linking the Nozzle Flow with Spray Characteristics in a Diesel Fuel Injector System” Atomization and Sprays 8 3 1998
- von Kuensberg Sarre, Christopher Kong, Song-Charng Reitz, Rolf D. “Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays” SAE Paper No. 1999-01-0912 1999
- Nishimura, A. Assanis, D. N. “A Model for Primary Diesel Atomization Based on Cavitation Bubble Collapse Energy” Proc. ICLASS-2000 2000
- Baumgarten, C. Stegemann, J. Merker, G. P. “A New Model for Cavitation Induced Primary Break-up of Diesel Sprays” Proc. ILASS-Europe 2002 2002
- Friend, J. F. “NIST Mixture Property Database User's Guide” 1992
- Hiroyasu, H. Arai, M. Shimizu, M. “Break-up Length of a Liquid Jet and Internal Flow in a Nozzle” Proc. ICLASS-91 1991
- Sou, A. Tomiyama, A. Hosokawa, S. Nigorikawa, S. Maeda, T. “Cavitation in a Two-Dimensional Nozzle and Liquid Jet Atomization (LDV Measurement of Liquid Velocity in a Nozzle)” JSME International Journal 49 4 2006
- Papoulias, D. Giannadakis, E. Mitroglou, N. Gavaises, M. Theodorakakos, A. “Cavitation in Fuel Injection Systems for Spray-Guided Direct Injection Gasoline Engines” SAE Paper No. 2007-01-1418 2007
- Sato, K. Hachino, K. Saito, Y. “INCEPTION AND DYNAMICS OF TRAVELING - BUBBLE - TYPE CAVITATION IN A VENTURI” Proc. ASME FEDSM'03, FEDSM2003-45322 2003
- CD-adapco JAPAN “Computational Fluid Dynamics Software STAR-CD Ver.3.15 Methodology” 2002