Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Validation and Application of a New 0D Flame/Wall Interaction Sub Model for SI Engines

Journal Article
2011-01-1893
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2011-01-1893
Published August 30, 2011 by SAE International in United States
Validation and Application of a New 0D Flame/Wall Interaction Sub Model for SI Engines
Sector:
Citation: Rivas, M., Higelin, P., Caillol, C., Sename, O. et al., "Validation and Application of a New 0D Flame/Wall Interaction Sub Model for SI Engines," SAE Int. J. Engines 5(3):718-733, 2012, https://doi.org/10.4271/2011-01-1893.
Language: English

References

  1. Nefischer, A. Neuman, J. Stanciu, A. Wimmer, A. Comparison and application of different phenomenological combustion models for turbo-charged SI engines SAE International Powertrains, Fuels and Lubricants Meeting 2010 2010
  2. Colin, O. Benkenida, A. Angelberger, A. 3D modeling of mixing, ignition and combustion phenomena in highly stratified gasoline engine Oil and Gas Science and Technology 58 47 62 2003
  3. Bougrine, S. Richard, S. Veynante, D. Modelling and simulation of the combustion ethanol blended fuels in a SI engine using a 0D coherent flame model SAE International , ( 2009-24-0016 ) 2009
  4. Yoshiyama, S. Tomita, E. Zhang, Z. Hamamoto, Y. Measurements and simulation of turbulent flame propagation in a spark ignition engine by using fractal burning model SAE , ( 2001-01-3603 ) 2001
  5. Bozza, F. Gimelli, A. Merola, S. Vaglieco, B. Validation of a fractal combusition model through flame imaging Modeling of SI and Diesel Engines 2005 , ( 2005-01-1120 ) 2005
  6. Baratta, M. Catania, A Spessa, E. Vassallo, A. Development of an improved fractal model for the simulation of turbulent flame propagation in SI engines SAE , ( 2005-24-082 ) 2005
  7. Bozza, F. Gimelli, A. Strazzullo, L. Torella, E. Cascone, C. Steady state and transient operation simulation of a downsized turbocharged SI engine Modeling of SI and Diesel Engines , ( 2007-01-0381 ) 2007
  8. Pierce, P. Ghandhi, J. Martin, J. Near-wall velocity characteristics in valved and ported motored engines SAE , ( 920152 ) 1992
  9. Heywood, J. Internal Combustion Engine Fundamentals McGraw-Hill International Editions 1988
  10. Chase, M. Jr. Davies, C. Downey, J. Jr. Frurip, D. McDonald, R. JANAF Thermochemical Tables American Institute of Physics 3rd 1986
  11. Bordet, N. Caillol, C. Higelin, P. Talon, V. A physical 0D combustion model using tabulated chemistry with presumed probability density function approach for multi injection diesel engines ( 2010-01-1493 ) 2010
  12. Woschni, G. A universally applicable equation for the instantaneus heat transfer coefficient in the interal combustion engine ( 670931 ) 1967
  13. Zhao, X. Matthews, R. Ellzey, E. Numerical simulations of combustion in SI engines: Comparison of the fractal flame model to the coherent flame model International Symposium COMODIA 1994
  14. Ulinski, M. Moore, P. Elia, M. Metghalchi, M. Laminar burning velocity of methane air diluent mixtures 1980
  15. Gulder, L. Correlations of laminar combustion data for alternative si engine fuels SAE , ( 841000 ) 1984
  16. Gulder, L. Smallwood, G. Wong, R. Snelling, D. Smith, R. Flame front surface characteristics in turbulent premixed propane/air combustion Combustion and Flame 120 407 416 2000
  17. Lafossas, F. Colin, O. Le Berr, F. Menegazzi, P. Application of a new 1D combustion model to gasoline transient engine operation ( 2005-01-2107 ) 2005
  18. Poinsot, T. Veynante, D. Theroetical and numerical combustion Edwards 2001
  19. Weller, H. Uslu, S. Gosman, A. Maly, R. Herweg, R. Heel, B. Prediction of combustion in homogeneus charge spark ignition engines Internationl Symposium COMODIA 1994
  20. Nishaiwaki, K. Saijyo, K. Modeling of flame wall interaciton in SI engine combustion Proceedings of the 15 Internal Combusiton Engine Symposium , ( 9935158 ) 63 68 1999
  21. Kojima, T. Nishiwaki, K. Modelling of flame wall interaction for combustion and heat transfer in SI engines JSAE Review 18 11 17 1996
  22. Foucher, F. Mounaim-Rousselle, C. Fractal approach to the evaluation of burning rates in the vecinity of the piston in a spark-ignition engine Combustion and Flame 143 323 332 2005
  23. Wilcox, D. Turbulence modeling for CFD DCW Industries 1993
  24. Valentino, G. Corcione, F. Seccia, G. Integral and micro time scales estimate in DI diesel engines International spring fuels & lubricants meeting , ( 971678 ) 1997
  25. Boggs, D. Borman, G. Calculation of heat flux integral length scales from spatially-resolved surface temperature measurements in an engine International Congress and Exposition , ( 910721 ) 1991
  26. Kaario, O. Larmi, M. Tanner, F. Relating integral length scale to turbulent time scale and comparing k-e and rng k-e turbulence models in diesel combustion simulation Modeling of SI Engines and Multi Dimensional Engine Modeling , ( 2002-01-1117 ) 2002
  27. Karim, G.A Raine, R.R Jones, W. An examination of cyclic variations in a dual fuel engine SAE International Fall Fuels and Lubricants Meeting and Exhibition , ( 881661 ) 1988
  28. Steiner, T. Boulouchos, K. Near-wall unsteady premixed flame propagation in SI engines International Congress and Exposition SAE , ( 951001 ) 1995
  29. Alizon, F. Transferts de chaleur convectifs dans la chambre de combustion des moteurs a combustion interne: Influence de I'arodynamique interne Technical report, PARIS VI 2005
  30. Tennekes, H. Lumley, J. First course in turbulence The MIT press 1985
  31. Barba, C. Burkhardt, C. A phenomenological combustion model for heat release rate prediction in hith-speed DI diesel engines with common rail injection SAE 2000
  32. Richard, S. Bougrine, S. Font, G. Lafossas, F. Le Ber, F. On the reduction of a 3D CFD combustion model to build a physical 0D model for simulating heat release, knock and pollutants in si engines Oil and Gas Sciend and Technology 64 223 242 2009

Cited By