This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Obtaining Structure-Borne Input Power for a SEA Model of an Earthmoving Machine Cab
Technical Paper
2011-01-1732
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Properly characterizing input forces is an important part of simulating structure-borne noise problems. The purpose of this work was to apply a known force reconstruction technique to an earthmoving machinery cab to obtain input functions for modeling purposes. The technique was performed on a cab under controlled laboratory conditions to gain confidence in the method prior to use on actual machines. Forces were measured directly using force transducers and compared to results from the force reconstruction technique. The measured forces and vibrations were used as input power to an SEA model with favorable results.
Recommended Content
Authors
Topic
Citation
Copley, D., Herrin, D., Raman, H., and Zhen, J., "Obtaining Structure-Borne Input Power for a SEA Model of an Earthmoving Machine Cab," SAE Technical Paper 2011-01-1732, 2011, https://doi.org/10.4271/2011-01-1732.Also In
References
- Lyon, R. H. DeJong, R. G. Theory and Application of Statistical Energy Analysis 2 nd Butterworth-Heinemann Boston, MA 1995
- Verheij, J. W. “Inverse and Reciprocity Methods for Machinery Noise Source Characterization and Sound Path Quantification, Part 1: Sources,” International Journal of Acoustics and Vibration 2 11 20 1997
- Verheij, J. W. “Inverse and Reciprocity Methods for Machinery Noise Source Characterization and Sound Path Quantification, Part 2: Transmission Paths,” International Journal of Acoustics and Vibration 2 103 112 1997
- de Vis, D. Hendricx, W. van der Linden, P. J. G. “Development and Integration of an Advanced Unified Approach to Structure Borne Noise Analysis,” 2 nd International Conference on Vehicle Comfort ATA 1992
- Hendricx, W. Vandenbroeck, D. “Suspension Analysis in View of Road Noise Optimization,” SAE Technical Paper 931343 1993 10.4271/931343
- Lim, T. C. Steyer, G. C. “System Dynamics Simulation Based on Structural Modification Analysis Using Response Techniques,” Proc. Tenth International Modal Analysis Conference San Diego Feb. 3 7 1153 1158 1992
- van der Linden, P. Fun, J. “Using Mechanical-Acoustic Reciprocity for Diagnosis of Structure Borne Sound in Vehicles,” SAE Technical Paper 931340 1993 10.4271/931340
- Wyckaert, K. Van der Auweraer, H. “Operational Analysis, Transfer Path Analysis, Modal Analysis: Tools to Understand Road Noise Problems in Cars,” SAE Technical Paper 951251 1995 10.4271/951251
- Janssens, M. H. A. Verheij, J. W. Thompson, D. J. “The Use of an Equivalent Forces Method for the Experimental Quantification of Structural Sound Transmission in Ships,” J. Sound Vib. 305 328 1999
- Karlsson, S. E. S. “Identification of External Structural Loads from Measured Harmonic Responses,” J. Sound Vib. 196 59 74 1996
- Thite, A. N. Thompson, D. J. “The Quantification of Structure-Borne Transmission Paths by Inverse Methods. Part 1: Improved Singular Value Rejection Methods,” J. Sound Vib. 264 411 431 2003
- Thite, A. N. Thompson, D. J. “The Quantification of Structure-borne Transmission Paths by Inverse Methods. Part 2: Use of Regularization Techniques,” J. Sound Vib. 264 433 451 2003
- Thite, A. N. Thompson, D. J. “Selection of Response Measurement Locations to Improve Inverse Force Determination,” Applied Acoustics 67 797 818 2006
- Choi, H. G. Thite, A. N. Thompson, D. J. “A Threshold for the Use of Tichonov Regularization in Inverse Force Determination,” Applied Acoustics 67 700 719 2006
- Mas, P. Sas, P. Wyckaert, K. “Indirect Force Identification Based upon Impedance Matrix Inversion: A Study on Statistical and Deterministical Accuracy,” Nineteenth ISMA Conference Leuven, Belgium 1994
- Otte, D. Development and Evaluation of Singular Value Methodologies for Studying Multivariate Noise & Vibration Problems Ph.D. Dissertation KU Leuven 1994