This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experimental Validation of a Heavy Goods Vehicle Fuel Consumption Model
Technical Paper
2011-01-1234
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Over the last decade the simulation of driving cycles through longitudinal vehicle models has become an important stage in the design, analysis and selection of vehicle powertrains. This paper presents an overview of existing software packages, along with the development of a new multipurpose driving cycle simulator implemented in the Matlab/Simulink environment. In order to evaluate the performance of the simulator, a MAN TGL 12.240 multi-usage delivery vehicle was fitted with a CAN-bus data logger and used to create a series of ‘real-life’ drive cycles. These were inputted into the vehicle model and the simulated fuel mass flow-rate and engine rotational speed were compared to those experimentally obtained.
Recommended Content
Authors
Citation
Sorniotti, A., Damiani, E., and Moorin, T., "Experimental Validation of a Heavy Goods Vehicle Fuel Consumption Model," SAE Technical Paper 2011-01-1234, 2011, https://doi.org/10.4271/2011-01-1234.Also In
References
- Lukic, S. M. Emadi, A. “Effects of drivetrain hybridization on fuel economy and dynamic performance of parallel hybrid electric vehicles” IEEE Trans. Veh. Technol. 53 2 385 389 Mar. 2004
- Guzzella, L. Sciarretta, A. Vehicle Propulsion Systems Springer Verlag 2005
- Fröberg, A. Nielsen, L. Hedström, L.G. Pettersson, M. “Controlling gear engagement and disengagement on heavy trucks for minimization of fuel consumption” Proc. IFAC World Congress Prague, Czech Republic 2005
- Back, M. Terwen, S. Krebs, V. “Predictive powertrain control for hybrid electric vehicles” Proc. 1st IFAC Symp. Adv. Automotive Control 2004 121 126
- Chan, C. C. Bouscayrol, A. “Electric, Hybrid, and Fuel-Cell Vehicles: Architectures and Modeling” IEEE Trans. Veh. Technol. 59 2 589 598 2010
- Simpson, A. “Validation of a Parametric Vehicle Modelling Tool Using Published Data for Prototype and Production Vehicles with Advanced Powertrain Technologies,” SAE Technical Paper 2005-01-3481 2005 10.4271/2005-01-3481
- Wipke, K.B. Cuddy, M.R. Burch, S.D. “ADVISOR 2.1: A User-Friendly Advanced Powertrain Simulation Using a Combined Backward/Forward Approach” IEEE Transactions on Vehicular Technology 48 6 1751 1761
- Rousseau, A. Sharer, P. Besnier, F. “Feasibility of Reusable Vehicle Modeling: Application to Hybrid Vehicle,” SAE Technical Paper 2004-01-1618 2004 10.4271/2004-01-1618
- EUCAR, CONCAWE and JRC/IES “Well-to-Wheels Analysis of Future Automotive Fuels and Powertrains in the European Context” 2003 http://ies.jrc.cec.eu.int/Download/eh
- Senger, R.D. Merkle, M.A. Nelson, D.J. “Validation of ADVISOR as a Simulation Tool for a Series Hybrid Electric Vehicle,” SAE Technical Paper 981133 1998 10.4271/981133
- Ogburn, M.J. Nelson, D.J. Wipke, K. Markel, T. “Modeling and Validation of a Fuel Cell Hybrid Vehicle,” SAE Technical Paper 2000-01-1566 2000 10.4271/2000-01-1566
- Pasquier, M. Duoba, M. Rousseau, A. “Validating Simulation Tools for Vehicle System Studies Using Advanced Control and Testing Procedures” EVS18 2001
- Argonne National Laboratory “Evaluation of Fuel Consumption Potential of Medium and Heavy Duty Vehicles through Modeling and Simulation” 2009
- Guzzella, L. Amstutz, A. “CAE Tools for Quasi-Static Modeling and Optimization of Hybrid Powertrains” IEEE Transactions on Vehicular Technology 48 6 1762 1769 1999
- General Motors Corporation (GM), Argonne National Laboratory, BP, ExxonMobil & Shell 2001 “Well-to-Wheel Energy Use and Greenhouse Gas Emissions of Advanced Fuel/Vehicle Systems - North American Analysis” http://www.transportation.anl.gov/pdfs/TA/339.pdf 27th September 2010
- MOVES (Motor Vehicle Emission Simulator) http://www.epa.gov/otaq/models/moves/index.htm 27th September 2010
- Rapid Automotive Performance Simulator (RAPTOR) http://www.swri.org/4org/d03/vehsys/advveh/raptor/default.htm 27th September 2010
- Winkler, D. Guhmann, C. “Hardware-in-the-loop simulation of a hybrid electric vehicle using Modelica/Dymola” http://mathpros.com/ 27th September 2010
- Genta, G. Morello, L. “The Automotive Chassis” Springer Verlag 2009
- Rizzoni, G. Guzzella, L. Baumann, B.M. “Unified Modeling of Hybrid Electric Vehicle Drivetrains” IEEE/ASME Transactions on Mechatronics 4 3 246 257 1999
- Burba, J.C. “Rethinking the Drive Cycle” Proceedings of the 17th International Electric Vehicle Symposium Montreal 2000
- Moore, T.C. “Tools and Strategies for Hybrid-Electric Drivesystem Optimization,” SAE Technical Paper 961660 1996 10.4271/961660
- Thomas, C.E. James, B.D. Lomax, F.D. Jr. Kuhn, I.F. Jr. “Integrated Analysis of Hydrogen Passenger Vehicle Transportation Pathways” Proceedings of the 1998 U.S. DOE Hydrogen Program Review National Renewable Energy Laboratory
- Friedman, D.J. “Maximizing Direct-Hydrogen PEM Fuel Cell Vehicle Efficiency - Is Hybridization Necessary?,” SAE Technical Paper 1999-01-0530 1999 10.4271/1999-01-0530
- http://www.dieselnet.com/standards/cycles/ 27th September 2010
- http://www.esri.com/software/arcgis/index.html 27th September 2010