This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
1D Simulation and Experimental Analysis of a Turbocharger Compressor for Automotive Engines under Unsteady Flow Conditions
Journal Article
2011-01-1147
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Topic:
Citation:
Bozza, F., De Bellis, V., Marelli, S., and Capobianco, M., "1D Simulation and Experimental Analysis of a Turbocharger Compressor for Automotive Engines under Unsteady Flow Conditions," SAE Int. J. Engines 4(1):1365-1384, 2011, https://doi.org/10.4271/2011-01-1147.
Language:
English
References
- Stokes, J. Lake, T. Osborne, R. “A Gasoline Engine Concept for Improved Fuel Economy - The Lean Boost System,” SAE Technical Paper 2000-01-2902 2000 10.4271/2000-01-2902
- Leduc, P. Dubar, B. Ranini, A. Monnier, G. “Downsizing of Gasoline Engines: an Efficient Way to Reduce CO2 Emissions” Oil and Gas Science and technology - Rev. IFP 58 2003 1 115 127
- Bandel, W. Fraidl, G. Kapus, P. Sikinger, H. “The Turbocharged GDI Engine: Boosted Synergies for High Fuel Economy Plus Ultra-low Emission,” SAE Technical Paper 2006-01-1266 2006 10.4271/2006-01-1266
- Petitjean, D. Bernardini, L. Middlemass, C. Shahed, S. “Advanced Gasoline Engine Turbocharging Technology for Fuel Economy Improvements,” SAE Technical Paper 2004-01-0988 2004 10.4271/2004-01-0988
- Capobianco, M. Marelli, S. “Turbocharger Turbine Performance Under Steady and Unsteady Flow: Test Bed Analysis and Correlation Criteria” 8 th International Conference on Turbochargers and Turbocharging Instn. Mech. Engrs. London 2006
- Capobianco, M. Gambarotta, A. “Variable geometry and waste-gated automotive turbochargers: measurements and comparison of turbine performance” ASME Transactions, Journal of Engineering for Gas Turbines and Power 114 553 560 1992
- Capobianco, M. Gambarotta, A. “Performance of a twin-entry automotive turbocharger turbine” ASME Energy-Sources Technology Conference and Exhibition, paper 93-ICE-2 Houston 1993
- Capobianco, M. Marelli, S. “Waste-Gate Turbocharging Control in Automotive SI Engines: Effect on Steady and Unsteady Turbine Performance,” SAE Technical Paper 2007-01-3543 2007 10.4271/2007-01-3543
- Capobianco, M. Polidori, F. “Experimental Investigation on Open Waste-Gate Behaviour of Automotive Turbochargers,” SAE Technical Paper 2008-36-0052 10.4271/2008-36-0052
- Capobianco, M. Marelli, S. “Experimental Investigation into the Pulsating Flow Performance of a Turbocharger Turbine in the Closed and Open Waste-Gate Region” 9th International Conference on Turbochargers and Turbocharging London 2010
- Bozza, F. Gimelli, A. Strazzullo, L. Torella, E. Cascone, C. “Steady-State and Transient Operation Simulation of a ‘Downsized’ Turbocharged SI Engine,” SAE Technical Paper 2007-01-0381 2007 10.4271/2007-01-0381
- Martin, G. Talon, V. Higelin, P. Charlet, A. Caillol, C. “Implementing Turbomachinery Physics into Data Map-Based Turbocharger Models,” SAE Technical Paper 2009-01-0310 2009 10.4271/2009-01-0310
- GT-Power User's Manual and Tutorial, GT-SUITE™ Version 6.0 2003 Gamma Techn.
- Piscaglia, F. Onorati, A. Marelli, S. Capobianco, M. “Unsteady Behavior in Turbocharger Turbines: Experimental Analysis and Numerical Simulation,” SAE Technical Paper 2007-24-0081 2007 10.4271/2007-24-0081
- Winkler, N. Angstrom, H-E. “Simulations and Measurements of a Two-Stage Turbocharged Heavy-Duty Diesel Engine including EGR in Transient Operation,” SAE Technical Paper 2008-01-0539 2008 10.4271/2008-01-0539
- Macek, J. Vitek, O. “Simulation of Pulsating Flow Unsteady Operation of a Turbocharger Radial Turbine,” SAE Technical Paper 2008-01-0295 2008 10.4271/2008-01-0295
- Bozza, F. De Bellis, V. “Steady and Unsteady Modeling of Turbocharger Compressors for Automotive Engines,” SAE Technical Paper 2010-01-1536 10.4271/2010-01-1536
- Leonard, O. Adam, O. “A Quasi-One Dimensional CFD Model for Multistage Turbomachines” Journal of Thermal Science 17 1 2008 Springer
- Harten, A. “On a Class of High Resolution Total Variation Stable Finite Difference Schemes” Journal of Computational Physics 21 21 23 1984
- Qiu, Xuwen Mallikarachchi, Chanaka Anderson, Mark “A New Slip Factor Model for Axial and Radial Impellers” ASME Paper GT2007-27064 2007
- Traupel, W. “Die Theorie der Stroömung durch Radialmaschinen” Braun, Karlsruhe 1962
- Dubitsky, O. Japikse, D. “Vaneless Diffuser Advanced Model” ASME Transaction, Journal of Turbomachinery 130 2008
- Gnielinski, V. “New equations for heat and mass transfer in turbulent pipe and channel” Int. Chemical engineering 1976
- Japikse, D. “Turbomachinery Performance Modeling, Cliff Garrett Turbomachinery and Applications Engineering Award,” SAE Technical Paper 2009-01-0307 2009 10.4271/2009-01-0307
- Japikse, D. “Advanced diffusion levels in turbocharger compressors and component matching” IMechE Conference on Turbocharging and Turbochargers, 1982, paper C45/82 143 Mechanical Engineering Publications London
- “Recommended Practices for the Assessment of the Effects of Atmospheric Water Ingestion on the Performance and Operability of Gas Turbines Engines” September 1995 92-836-1022-9
- Capon, G. Morris, T. “The Effect of Air Inlet System Features on Automotive Turbocharger Compressor Performance” 9th International Conference on Turbochargers and Turbocharging, IMechE May 2010 London
- Yammine, A. Vidal, F. Chesse, P. Chalet, D. Perret, L. Mohtar, H. “Etude de l'écoulement en amont d'un turbocompresseur par mesures ADL” Congrès Francophone de Techniques Laser, CFTL 2008 Futuroscope 16 19 septembre 2008
- Westin, F. Burenius, R. “Measurement of interstage losses of a two-stage turbocharger system in a turbocharger test rig” SAE Paper 2010-01-1221 SAE 2010 World Congress & Exhibition April 2010