This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study of Driver Injury Mechanism in High Speed Lateral Impacts of Stock Car Auto Racing Using a Human Body FE Model
Technical Paper
2011-01-1104
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper analyzed the mechanisms of injury in high speed, right-lateral impacts of stock car auto racing, and interaction of the occupant and the seat system for the purpose of reducing the risk of injury, primarily rib fractures. Many safety improvements have been made to stock car racing recently, including the Head and Neck Support devices (HANS®), the 6-point restraint harnesses, and the implementation of the SAFER Barrier. These improvements have contributed greatly to mitigating injury during the race crash event. However, there is still potential to improve the seat structure and the understanding of the interaction between the driver and the seat in the continuation of making racing safety improvements. This is particularly true in the case of right-lateral impacts where the primary interaction is between the seat supports and the driver and where the chest is the primary region of injury. Currently, the driver kinematics and the interactions between the driver and the seat/restraint system at such high speeds are not clearly understood, due to the limitations of physical testing. Therefore, for this study the Total HUman Model for Safety (THUMS) FE model was combined with a detailed NASCAR® cockpit and typical racing seat structure, in order to simulate the driver in a right-lateral high acceleration impact. Simulations were conducted with two varied accelerations (25G and 70G), to judge the effect on injury risk. Additionally, finite element (FE) simulations were run to investigate the risk of injury by varying chest support length, rigidity, and shoulder support vertical angles, representing the variability found in real-world racing seat structures. For all of these simulations the distributed forces to the driver were analyzed and compared to injury tolerance limits found in literature. Additionally, strain analysis of the cortical bone was used to estimate bone fracture risk. By comparing all of the analysis results the most effective structure found to help reduce the possibility of rib fractures was that of a full rigid chest support structure (covering the length of the lateral ribs) with Energy Absorbing (EA) foam padding. This allowed for optimum distribution of force across the lateral chest which prevented force concentration to local areas of the ribs. It also provided a reduction in the applied shoulder force, hence, reducing the load to the clavicle. This study successfully simulated high speed right lateral impacts using the human finite element model, THUMS, and demonstrated mechanisms of injury for rib fractures which can be improved upon through seat structure modifications to help reduce the risk of injury in such crashes.
Recommended Content
Authors
Citation
Smith, R., Hayashi, S., Kitagawa, Y., and Yasuki, T., "A Study of Driver Injury Mechanism in High Speed Lateral Impacts of Stock Car Auto Racing Using a Human Body FE Model," SAE Technical Paper 2011-01-1104, 2011, https://doi.org/10.4271/2011-01-1104.Also In
References
- Melvin, J. Gideon, T. “Biomechanical Principles of Racecar Seat Design for Side Impact Protection,” SAE Technical Paper 2004-01-3515 2004 10.4271/2004-01-3515
- Iwamoto, M. Kisanuki, Y. Watanabe, I. Furusu, K. Miki, K. Hasegawa, J. “Development of a Finite Element Model of the Total Human Model for Safety (THUMS) and Application to Injury Reconstruction,” Proc. 2002 IRCOBI Conference Munich Germany 31 42 2002
- Koh, S. Cavanaugh, J. Mason, M. Petersen, S. et al. “Shoulder Injury and Response Due to Lateral Glenohumeral Joint Impact: An Analysis of Combined Data,” SAE Technical Paper 2005-22-0014 2005
- Nusholtz, G. Alem, N. Melvin, J. “Impact Response and Injury of the Pelvis,” SAE Technical Paper 821160 1982 10.4271/821160
- Tarriere, C. Walfisch, G. Fayon, A. Rosey, J. “Synthesis of Human Tolerances Obtained from Lateral Impact Simulations,” Proc. 7th International Technical Conference on Experimental Safety Vehicles Paris, France 359 373 1979
- Schneider, L. Robbins, D. Pflug, M. Snyder, R. “Anthropometry of Motor Vehicle Occupants,” 2 The University of Michigan Transportation Research Institute 1983
- Furusu, K. Watanabe, I. Kato, C. Miki, K. Hasegawa, J. “Fundamental Study of Side Impact Analysis Using the Finite Element Model of the Human Thorax,” JSAE 22 2 195 199 2001
- Kemper, A. McNally, C. Kennedy, E. Manoogian, S. et al. “Material Properties of Human Rib Cortical Bone from Dynamic Tension Coupon Testing,” SAE Technical Paper 2005-22-0010 2005
- Melvin, J. Begeman, P. Faller, R. Sicking, D. et al. “Crash Protection of Stock Car Racing Drivers - Application of Biomechanical Analysis of Indy Car Crash Research,” SAE Technical Paper 2006-22-0016 2006