This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Advanced Material Properties Measurements with Optical Metrology
Technical Paper
2011-01-0997
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Materials are advancing at a record rate, with unimagined complexity even in now standard materials. Traditional measurement tools can only get approximate material properties. Core to all proper design and accurate computer modeling is a base understanding of accurate material properties.
Full-field optical measurement tools using 3D digital image correlation (DIC) is able to provide a more complete measurement and analysis of these advanced materials, providing precise material properties at all scales. This paper will review microscopic analysis of crystalline behavior, coupon testing of dog bone specimens and large scale materials measurements in stamping operations. In addition, the measurement of extreme materials properties, such as high-speed forming limit curves and deep drawing properties will be discussed. Key to all of these measurements are the associated standards that control them; these will be discussed.
Recommended Content
Authors
Citation
Tyson, J., "Advanced Material Properties Measurements with Optical Metrology," SAE Technical Paper 2011-01-0997, 2011, https://doi.org/10.4271/2011-01-0997.Also In
References
- Alpers, B. Bergmann, D. Galanulis, K. Winter, D. Advanced deformation measurement in sheet metal forming Proceedings of the 6th ICTP September 1999
- Nakazima, K. Kikuma, T. Asaku, K. Study on the formability of steel sheet Yawata Technical Reports 264 1968
- Marciniak, Z. Kuczynski, K. Limit Strains in the process of stretch-forming sheet metal Int. Journal of Mech. Science 9 1967 609 620
- Galanulis, K. Hofmann, A. Determination of Forming Limit Diagrams Using an Optical Measurement System Proceedings of Shetmet 99 Braunschweig, Germany October 1999
- Tyson, J. Schmidt, T. Galanulis, K. Advanced Photogrammetry for Robust Deformation and Strain Measurement Proceedings of the 2002 SEM Annual Conference & Exhibition of Experimental and Applied Mechanics June 2002
- Liebertz, H. Keller, S. Merklein, M. Illig, R. Koehler, A. Kröff, A. Rauer, J. Staubwasser, L. Steinbeck, G. Hotz, W. Vegter, A. Duwel, A. Guidline for the Determination of Forming Limit Curves IDDRG May 2004
- Hoffmann, H. Vogl, C. Determination of True Stress-Strain-Curves and Normal Anisotropy in Tensile Tests with Optical Strain Measurement STC F, 52/1/2003 217 CIRP Annals 2003
- “Determining Residual Stresses by the Hole-Drilling Strain-Gage Method,” standard E837-99 American Society for Testing and Materials West Conshohocken, PA 2001
- Nelson, D. V. Mc Crickerd, J.T. “Residual Stress Determination through Combined Use of Holographic Interferometry and Blind Hole Drilling,” Experimental Mechanics 26 4 371 378 1986
- Schmidt Paulsen, U. Schmidt, T. Erne, O. “Developments in Large Wind Turbine Modal Analysis Using Point Tracking Videogrammetry,” September 2009
- Tyson, J. Schmidt, T. Gilat, A. Walker, A. Seidt, J. “3D Image Correlation Studies of Geometry and Material Property Effects During Split Hopkinson Bar Experiments” SEM 2008 Conference
- Tyson, J. Schmidt, T. Revilock, D.M. Jr. Padula, S. II Pereira, J.M. Melis, M. Lyle, K. “Performance Verification of 3D Image Correlation Using Digital High-Speed Cameras,” Proceedings of 2005 SEM Annual Conference and Exposition Portland, OR June 7 9 2005
- Kang, J. “Microscopic Strain Mapping Based on Digital Image Correlation” 2007
- Woodard, N. Johnson, E. Demers, J. Chen, C. Nielsen, J. Logan, T. “Low-Cost Electrical Resistance Spot Welding Technique for Micro-Optical Component Mounting with Sub-Micron Tolerance” August 2008
- LeBlanc, M.M. Florando, J.N. Lassila, D.H. Tyson, J. Schmidt, T. “Image Correlation Applied to Single Crystal Plasticity Experiments and Comparison to Strain Gage Data” Experimental Techniques 30 4 33 July 1 2006
- Tyson, J. Schmidt, T. Galanulis, K. “Smart Biomechanics Strain Measurements using 3D Image Correlation Photogrammetry” Biophotonics November 2003
- Tyson, J. Schmidt, T. Lee, M. Pecht, M. “Application of 3D Measurement System with CCD camera in Microelectronics” Advanced Packaging November 2003
- Galanulis, K. “Optical Measuring Technologies in Sheet Metal Processing” May 2005
- Tyson, J. Schmidt, T. Galanulis, K. Coe, D. “Validation and Iteration of Computer Models using Full-field Optical Methods” April 2006
- Tyson, J Schmidt, T Coe, D Galanulis, K. “3D Image Correlation for Dynamic and Extreme Environment Materials Measurements Holistic Structure Measurements from the Laboratory to the Field,” SEM 2005 Conference Proceedings Portland OR June 2005
- Tyson, J. Psilopoulos, J. “Automated Quality Control of Stamping with Optical Methods” International Auto Body Congress Troy, MI November 4 2009
- Tyson, J. Schmidt, T. Galanulis, K. “Full-Field Dynamic Displacement and Strain Measurement Using Advanced 3D Image Correlation Photogrammetry” Experimental Techniques May June 2003 27 3 47 50 July Aug 27 4 44 47
- Tyson, J. Galanulis, K. “Optical Measurements for Modern Design, Manufacturing and Test” March 2010
- Avitabile, P. Niezrecki, C. Helfrick, M. Warren, C. Pingle, P. “Noncantact Measurement Techniques for Model Correlation” Sound & Vibration January 2010
- Hibbitt, Karlsson and Lorensen, Inc. ABAQUS -Theory Manual 5.7
- ARAMIS System Manual GOM Mittelweg 7-8, 38106 Braunschweig, Germany 2009
- Sztefek, P. et al “Using digital image correlation to determine bone surface strains during loading and after adaptation of the mouse tibia” Journal of Biomechanics October 2009
- Park, S.B. Report: Comparison of Warpage Measurement Methods and Errors in Shadow Moire 2008