This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Reverse Logistic Planning and Product Take Back Analysis for Sustainable Product & Process Design
Technical Paper
2011-01-0852
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Diverse factors of sustainability drive the life cycle analysis of the product which already exists and need to go through Eco-redesign strategy. Sustainability in all sphere of the design approach requires compliance with regulations and standards. The concept of the reverse logistics and take back is getting very important in the wake of product recalls for exclusive compliance of safety requirements to satisfy the regulations. That is why it is very important that the reverse logistic supply chain net work for the product return lead time and life cycle impact of product planning should begins long before disposal and at the new product design time. This is why it is now believed to be best the way to measure the impact through a Life cycle analysis and reverse logistic planning which necessarily to be decided at the conceptual stage as to how the steps and stage of reverse logistic will be followed. The EU End of life vehicle directive and its effect are very important in this direction.
A conceptual model is presented in this regard which shows the role of reverse logistic and life cycle assessment of the product like packaging of plastic for which there is dearth of significant reverse logistic aspect that can influences the manufacturer's choice for the potential consumer. The dynamics in the lead time affect performance if this can be maximized stochastically in the wake of product take back and recalls for establishing global green economy. However, the model describes the function from the retailer path with which is the vital connection for other products like fridge, deep freezers, air conditions, juicers, mixers, cooking range heaters etc can be done by using the reverse logistic for re-manufacturing. Reverse Logistic and Life cycle analysis planning determines the big picture of the entire life cycle of the product in a holistic fashion for making policy decision and recommendations for all stake holders of the global market economy. Besides after the unloaded products to the specified consumer market station the return path of the same delivery service can be utilized logically for the reverse logistic and product take back. In the next generation of logistics, proactive companies must be innovative enough to integrate all strategic and operational factors in their reverse-logistics systems studies for their product take back as a part of a Comprehensive design for the new product & process system life cycle analysis.
Recommended Content
Technical Paper | Web-based Engineering for Product Development and Business Support |
Technical Paper | Diagnostic Challenges in the Automotive Workshop |
Aerospace Standard | Safety Requirements for Procurement, Maintenance and Use of Hand-held Powered Tools |
Authors
Topic
Citation
Ali Qureshi, Z., "Reverse Logistic Planning and Product Take Back Analysis for Sustainable Product & Process Design," SAE Technical Paper 2011-01-0852, 2011, https://doi.org/10.4271/2011-01-0852.Also In
References
- De Brito, M.P. Dekker, R. “Modeling product returns in inventory control - an empirical validation of general assumptions” International Journal of Production Economics 2003 81-82 225 241
- De Brito, M.P. Dekker, R. A framework for reverse logistics Quantitative Approaches to Reverse Logistics Dekker, R. Inderfurth, K. van Wassenhove, L.N. Fleischmann, M. Springer-Verlag Berlin, Germany 2004 1 27
- Ganeshan, R Jack, E Magazine, MJ Stephens, P. “A taxonomic review of supply chain management research” Tayur, S Ganesham, R Magazine, M Quantitative Models for Supply Chain Management Kluwer Academic Publishers Dordrecht, The Netherlands 1999 840 879
- Fleischmann, M Bloemh of -Ruwaard, JM Dekker, R Laan van der, EA Nunen van, JAEE Wassenhove van, LN Quantitative Models for Reverse Logistics: a review European Journal of Operational Research 1997 103 l 17
- Fleischmann, M Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains Springer-Verlag Berlin Heidelberg New York 1 20 2004 13: 978-3540406969
- Barry, J. Girard, G. Perras, C. “Logistics planning shifts into reverse Journal of European Business” 5 1 1993 34 38
- Bopp, R. Bullinger, H.-J. “Life-Cycle Costing in Early Design” 1998 Cambridge, MA MIT Press
- Viswana Viswanadham, N Raghavan, Srinivasa N. R. “Performance Analysis and Design of Supply Chains: A Petri Net Approach” The Journal of the Operational Research Society 2000 51 10
- Jain, V. Benyoucef, L. “Managing long supply chain networks: some emerging issues and challenges” Journal of Manufacturing Technology Management 19 4 469 496 2008
- De Treville, S. Shapiro, R.D. Hameri, A.P. From supply chain to demand chain: the role of lead time reduction in improving demand chain performance Journal of Operations Management 21 613 627 2004
- Selcuk, B. Adan, I.J.B.F. De Kok, T.G. Fransoo, J.C. “An explicit analysis of the lead time syndrome stability condition and performance evaluation” Publishing and the Ecology of European Research 2006 http://repository.peerproject.eu:8080/jspui/handle/123456789/3661
- Upasani, A. Uzsoy, R. “Incorporating manufacturing lead times in joint production marketing models: a review and some future directions” Annals of Operations Research 161 171 188 2008
- Santos, J. Wysk, R. A. Torres, J.M. “Improving production with lean thinking” John Wiley & Sons, Inc. 978-0-471-75486-2 New Jersey 2006
- Suri, R. “Quick response manufacturing A company wide approach to reducing lead times” Productivity Press 13: 978-1563272011 1998
- Clarke, CE “The greatest of a finite set of random variables” journal of Operations Research Mar Apr 145 161 1961
- Li, K.H. Lee, S.F. Li, C.K. Lu, D. “Evaluation of total throughput time for an electronics production line by simulation and fuzzy PERT network” Journal of Advanced Manufacturing Systems 4 2 195 208 2005