This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental Characterization of High-Pressure Impinging Sprays for CFD Modeling of GDI Engines

Journal Article
2011-01-0685
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 12, 2011 by SAE International in United States
Experimental Characterization of High-Pressure Impinging Sprays for CFD Modeling of GDI Engines
Sector:
Citation: Montanaro, A., Allocca, L., Ettorre, D., Lucchini, T. et al., "Experimental Characterization of High-Pressure Impinging Sprays for CFD Modeling of GDI Engines," SAE Int. J. Engines 4(1):747-763, 2011, https://doi.org/10.4271/2011-01-0685.
Language: English

References

  1. Zhao, F. Q. Lai, M. Harrington, D. “A Review of Mixture Preparation and Combustion Control for Spark-Ignited, Direct-Injection Gasoline Engines,” SAE Technical Paper 970627 1997 10.4271/970627
  2. Shahed, S. M. Bauer, K. H. “Parametric Studies of the Impact of Turbocharging on Gasoline Engine Downsizing,” SAE Int. J. Engines 2 1 1347 1358 2009 10.4271/2009-01-1472
  3. Rivera, E. A. Mastro, N. Zizelman, J. Kirwan, J. Ooyama, R. “Development of Injector for the Direct Injection Homogeneous Market using Design for Six Sigma,” SAE Technical Paper 2010-01-0594 2010 10.4271/2010-01-0594
  4. Adomeit, P. Weinowski, R. Ewald, J. Brunn, A. Kleeberg, H. Tomazic, D. Pischinger, S. Jakob, M. “A New Approach for Optimization of Mixture Formation on Gasoline DI Engines,” SAE Technical Paper 2010-01-0591 2010 10.4271/2010-01-0591
  5. Matsumoto, A. Moore, W Lai, M. Zheng, Y. Foster, M. Xie, X. Yen, D. Confer, K. Hopkins, E. “Spray Characterization of Ethanol Gasoline Blends and Comparison to a CFD Model for a Gasoline Direct Injector,” SAE Int. J. Engines 3 1 402 425 2010 10.4271/2010-01-0601
  6. Nauwerck, A. Pfeil, J. Velji, A. Spicher, U. Richter, B. “A Basic Experimental Study of Gasoline Direct Injection at Significantly High Injection Pressures,” SAE Technical Paper 2005-01-0098 2005 10.4271/2005-01-0098
  7. Abart, M. Schmidt, S. Schoegl, O. Trattner, A. Kirchberger, R. Eichlseder, H. Jajcevic, D. “Basic Investigations on the Prediction of Spray-Wall and Spray-Fluid Interaction for a GDI Combustion Process,” SAE Technical Paper 2010-32-0030 2010 10.4271/2010-32-0030
  8. Nordin, N. “Complex Chemistry Modeling of Diesel Spray Combustion,” PhD thesis Chalmers University of Technology, Department of Thermo Fluid Dynamics Goteborg 2001
  9. Lucchini, T D'Errico, G. Brusiani, F. Bianchi, G. M. “A Finite-Element Based Mesh Motion Technique for Internal Combustion Engine Simulations,” COMODIA 2008 Sapporo, Japan July 27 31 2008
  10. Montenegro, G. Onorati, A. Piscaglia, F. D'Errico, G. “Integrated 1D-MultiD Fluid Dynamic Models for the Simulation of I.C.E. Intake and Exhaust Systems,” SAE Technical Paper 2007-01-0495 2007 10.4271/2007-01-0495
  11. OpenFOAM “The Open-source CFD toolbox,” http://www.openfoam.org/ September 2010
  12. Lucchini, T. Ettorre, D. D'Errico, G. Brusiani, F. Bianchi, G. Montanaro, A. Allocca, L. “Experimental and Numerical Investigation of High-Pressure Diesel Sprays with Multiple Injections at Engine Conditions,” SAE Technical Paper 2010-01-0179 2010 10.4271/2010-01-0179
  13. Lucchini, T. D'Errico, G. Brusiani, F. Bianchi, G. M. Tukovic, Z. Jasak, H. “Multi-dimensional modeling of the air/fuel mixture formation process in a PFI engine for motorcycle applications,” SAE Technical Paper 2009-24-0015 2009 10.4271/2009-24-0015
  14. Bosch, W. “The Fuel Rate Indicator: a New Measuring Instrument for Display of the Characteristics of Individual Injection,” SAE Technical Paper 660749 1966 10.4271/660749
  15. Wallace, I. “Injection Rate Gauge: Pass Off Information and User Instructions” Fuel & Engine Management Systems Graz December 2002
  16. Alfuso, S. Allocca, L. Caputo, G. Corcione, F.E. Montanaro, A. Valentino, G. “Experimental Investigation of a Spray from a Multi-jet Common Rail Injection System for Small Engines,” SAE Technical Paper 2005-24-090 2005 10.4271/2005-24-090
  17. Nurick, W.H. “Orifice Cavitation and its Effects on Spray Mixing” J. Fluids Eng. 90 681 687 1976
  18. Huh, K. Y. Gosman, A. D. “A Phenomenological Model of Diesel Spray Atomization,” Proceedings of the International Conference on Multiphase Flows September 24 27 Tsukuba, Japan 1991
  19. Bianchi, G. M. Pelloni, P. “Modeling the Diesel Fuel Spray Breakup by Using a Hybrid Model,” SAE Technical Paper 1999-01-0226 1999 10.4271/1999-01-0226
  20. Reitz, R. D. “Modeling Atomization Processes in High-Pressure Vaporizing Sprays,” Atomization and Spray Technology 3 309 33 1987
  21. Reitz, R.D. Bracco, F. V. “Mechanisms of Breakup of Round Liquid Jets,” Encyclopedia of Fluid Mechanics, Gulf Pub 3 233 249 1986
  22. Brusiani, F. Falfari, S. Forte, C. “The Role of Cavitation inside High Pressure GDI” ATI Technical Paper ATI09-11-009 2009
  23. Qian, J. Law, K. “Regimes of Coalescence and Separation in Droplet Collision,” J. Fluid Mech 331 59 80 1997
  24. Stanton, D. Lippert, A. Reitz, R. D. Rutland, C. J. “Influence of Spray-Wall Interaction and Fuel Films on Cold Starting in Direct Injection Diesel Engines,” SAE Technical Paper 982584 1998 10.4271/982584
  25. Kolpakov, A. V. et al. “Calculation of the Rebound Condition for Colliding Drops of Sharply Different Sizes,” Kollodn. Zh. 47 1985
  26. Stanton, D. Rutland, C. J. “Modeling Fuel Film Formation and Wall Interaction in Diesel Engines,” SAE Technical Paper 960628 1996 10.4271/960628
  27. Yarin, A. L. Weiss, D. A. “Impact of Drops on Solid Surfaces: Self-Similar Capillary Waves, and Splashing as a new Type of Kinematic Discontinuity,” Journal of Fluid Mechanics 283 1995
  28. Senecal, P. K. Richards, K. J. Pomraning, E. Yang, T. Dai, M. Z. McDavid, R. M. Patterson, M. A. Hou, S. Shethaji, T. “A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations,” SAE Technical Paper 2007-01-0159 2007 10.4271/2007-01-0159
  29. Lippert, A. M. Chang, S. Are, S. Schmidt, D. P. “Mesh Indipendence and Adaptive Mesh Refinement For Advanced Engine Spray Simulations,” SAE Technical Paper 2005-01-0207 2005 10.4271/2005-01-0207
  30. Jasak, H. “Error Analysis and estimation for the finite volume method with applications to fluid flows,” Ph.D. thesis Imperial College of Science, Technology and Medicine London 1996
  31. Lucchini, T. Ettorre, D. D'Errico, G. Ferrari, G. “Numerical Investigation of Non-Reacting and Reacting Diesel Sprays in Constant-Volume Vessels,” SAE Int. J. Fuels Lubr. 2 1 966 975 2009 10.4271/2009-01-1971

Cited By