This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Transient Thermal Simulation Process over a Diesel Exhaust System during Regeneration
Technical Paper
2011-01-0658
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
With the constant need to meet new environmental regulations, the improvement of automotive exhaust systems technologies to be cleaner and more effective is a necessity.
To achieve these regulations the automakers have been focused on the development of better particle filters and more effective cleaning processes.
Catalyst Oxidation and Diesel Particle Filter Regeneration are good and effective techniques to accomplish these objectives but the amount of heat generated by these processes is a concern in the thermal management of the vehicle.
To gain a better understanding of these effects Finite Element Thermal Analysis has proved to be a useful tool to predict and observe the increment of temperature during these processes.
This work is focus on a simulation process using several 1-D and 3-D techniques to predict the skin exhaust temperature during the regeneration process moment in which the system achieve the maximum temperature.
The objective of this work is to assess the simulation results and compare it to physical test results in order to correlate the proposed methodology.
Recommended Content
Topic
Citation
Martinez Laurent, J., "Transient Thermal Simulation Process over a Diesel Exhaust System during Regeneration," SAE Technical Paper 2011-01-0658, 2011, https://doi.org/10.4271/2011-01-0658.Also In
References
- Su, F. Gordon, B.W. Hong, H. 2007 Simulation of a Diesel Engine After treatment System Using Singularly Perturbed Sliding Manifold
- Hinterberger, C. Olesen, M. Kaiser, R. “3D Simulation of Soot Loading and Regeneration of Diesel Particulate Filter Systems,” SAE Technical Paper 2007-01-1143 2007 10.4271/2007-01-1143
- Konstandopoulos, A.G. Kostoglou, M. Vlachos, N. Kladopoulou, E. “Progress in Diesel Particulate Filter Simulation,” SAE Technical Paper 2005-01-0946 2005 10.4271/2005-01-0946
- Konstandopoulos, A.G. Kostoglou, M. Lorentzou, S. “Wall-Scale Reaction Models in Diesel Particulate Filters,” SAE Technical Paper 2007-01-1130 2007 10.4271/2007-01-1130
- Fortier, M. Tsai, S. 2005 Statistics-based Evaluation Capability Metrics for Tests and Analysis
- Olsson, J. Wenlander, M. 2006 Dept. of Electrical Engineering Linköpings universitet Optimal Control of a diesel engine with VGT and EGR
- Masoudi, M. “Hydrodynamics of Diesel Particulate Filters,” SAE Technical Paper 2002-01-1016 2002 10.4271/2002-01-1016
- Masoudi, M. Konstandopoulos, A.G. Nikitidis, M.S. Skaperdas, E. et al. “Validation of a Model and Development of a Simulator for Predicting the Pressure Drop of Diesel Particulate Filters,” SAE Technical Paper 2001-01-0911 2001 10.4271/2001-01-0911
- Montenegro, G. Piscaglia, F. Ferrari, G. Onorati, A. et al. “A 1D Unsteady Thermo-Fluid Dynamic Approach for the Simulation of the Hydrodynamics of Diesel Particulate Filters,” SAE Technical Paper 2006-01-0262 2006 10.4271/2006-01-0262
- Vlachos, N. Patrianakos, G. Kostoglou, M. Konstandopoulos, A.G. “Micro-Simulation of NO-NO 2 Transport and Reaction in the Wall of a Catalyzed Diesel Particulate Filter,” SAE Int. J. Fuels Lubr. 1 1 201 209 2008 10.4271/2008-01-0442
- Wirojsakunchai, E. Kolodziej, C. Yapaulo, R. Foster, D.E. “Development of the Diesel Exhaust Filtration Analysis System (DEFA),” SAE Int. J. Fuels Lubr. 1 1 265 273 2008 10.4271/2008-01-0486
- General Motors Thermal development process 2008
- Thermodynamics and engineering approach Cengel, Yunus McGraw Hill 6th
- Motores de combustion interna análisis y aplicaciones Edward, Orbert
- Johnson, J.H. “Diesel Particulate Emissions Landmark Research 1994-2001,” SAE International Warrendale, PA 978-0-7680-0998-9 2002