Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Fuel Reactivity Controlled Compression Ignition (RCCI) Combustion in Light- and Heavy-Duty Engines

Journal Article
2011-01-0357
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2011-01-0357
Published April 12, 2011 by SAE International in United States
Fuel Reactivity Controlled Compression Ignition (RCCI) Combustion in Light- and Heavy-Duty Engines
Sector:
Citation: Kokjohn, S., Hanson, R., Splitter, D., Kaddatz, J. et al., "Fuel Reactivity Controlled Compression Ignition (RCCI) Combustion in Light- and Heavy-Duty Engines," SAE Int. J. Engines 4(1):360-374, 2011, https://doi.org/10.4271/2011-01-0357.
Language: English

References

  1. Kim, J. Park, S. W. Reitz, R. D. Improvements in the Performance and Pollutant Emissions for Stoichiometric Diesel Combustion Engines using a Two-Spray-Angle Nozzle Journal of Automobile Engineering 2010 224 8 1113 1122
  2. Theis, J. Ura, J. Li, J. Surnilla, G. et al. “NOx Release Characteristics of Lean NOx Traps During Rich Purges,” SAE Technical Paper 2003-01-1159 2003 10.4271/2003-01-1159
  3. Turns, S. R. An Introduction to Combustion: Concepts and Applications Second McGraw-Hill New York 2000
  4. Manente, V. Tunestal, P. Johansson, B. Cannella, W. “Effects of Ethanol and Different Type of Gasoline Fuels on Partially Premixed Combustion from Low to High Load,” SAE Technical Paper 2010-01-0871 2010 10.4271/2010-01-0871
  5. Splitter, D. A. Hanson, R. M. Kokjohn, S. L. Reitz, R. D. Improving Engine Performance by Optimizing Fuel Reactivity with a Dual Fuel PCCI Strategy THIESEL 2010 Conference on Thermo and Fluid Dynamic Processes in Diesel Engines Valencia, Spain September 14 17 2010
  6. Manente, V. Johansson, B. Tunestal, P. “Partially Premixed Combustion at High Load using Gasoline and Ethanol, a Comparison with Diesel,” SAE Technical Paper 2009-01-0944 2009 10.4271/2009-01-0944
  7. Kokjohn, S. Hanson, R. Splitter, D. Reitz, R. “Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending,” SAE Int. J. Engines 2 2 24 39 2010 10.4271/2009-01-2647
  8. Hasegawa, R. Yanagihara, H. “HCCI Combustion in DI Diesel Engine,” SAE Technical Paper 2003-01-0745 2003 10.4271/2003-01-0745
  9. Hardy, W. Reitz, R. “A Study of the Effects of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion,” SAE Technical Paper 2006-01-0026 2006 10.4271/2006-01-0026
  10. Opat, R. Ra, Y. Gonzalez, D. M. Krieger, R. et al. “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine,” SAE Technical Paper 2007-01-0193 2007 10.4271/2007-01-0193
  11. Kokjohn, S. L. Reitz, R. D. Investigation of the Roles of Flame Propagation, Turbulent Mixing, and Volumetric Heat Release in Conventional and Low Temperature Diesel Combustion ASME J. Eng. Gas Turbines Power 2011
  12. Ra, Y. Reitz, R. D. A Reduced Chemical Kinetic Model for IC Engine Combustion Simulations with Primary Reference Fuels Combustion and Flame 2008 155 4 713 738
  13. Kokjohn, S. L. Hanson, R. M. Splitter, D. A. Reitz, R. D. Fuel Reactivity Controlled Compression Ignition (RCCI): A Pathway to Controlled High-Efficiency Clean Combustion International Journal of Engine Research 2011
  14. Lutz, A. E. Kee, R. J. Miller, J. A. SENKIN: A FORTRAN Program for Predicting Homogeneous Gas Phase Chemical Kinetics with Sensitivity Analysis 1988
  15. Kokjohn, S. L. Reitz, R. D. A Modeling Study of Charge Preparation in an HCCI Engine using a Variable Pressure Pulse (VPP) Injection System and Optimized PRF Blends 11th International Conference on Liquid Atomization and Spray Systems Vail, Colorado USA July 30 2009
  16. Hanson, R. Kokjohn, S. Splitter, D. Reitz, R. “An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine,” SAE Int. J. Engines 3 1 700 716 2010 10.4271/2010-01-0864
  17. Splitter, D. Kokjohn, S. Rein, K. Hanson, R. et al. “An Optical Investigation of Ignition Processes in Fuel Reactivity Controlled PCCI Combustion,” SAE Int. J. Engines 3 1 142 162 2010 10.4271/2010-01-0345
  18. Swor, T. Kokjohn, S. Andrie, M. Reitz, R. “Improving Diesel Engine Performance Using Low and High Pressure Split Injections for Single Heat Release and Two-Stage Combustion,” SAE Technical Paper 2010-01-0340 2010 10.4271/2010-01-0340
  19. Amsden, A. A. KIVA-3V, Release 2, Improvements to KIVA-3V LA-UR-99-915 1999 LA-UR-99-915.
  20. Abani, N. Munnannur, A. Reitz, R. D. Reduction of Numerical Parameter Dependencies in Diesel Spray Models Journal of Engineering for Gas Turbines and Power 2008 130 3 9
  21. Abani, N. Kokjohn, S. Park, S. Bergin, M. et al. “An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations,” SAE Technical Paper 2008-01-0970 2008 10.4271/2008-01-0970
  22. Kong, S.-. Sun, Y. Reitz, R. D. Modeling Diesel Spray Flame Lift-Off, Sooting Tendency and NOx Emissions using Detailed Chemistry with a Phenomenological Soot Model ASME Journal of Gas Turbines and Power 2007 129 245 251
  23. Beale, J. C. Reitz, R. D. Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid Model Atomization and Sprays 1999 9 6 623 650
  24. Ra, Y. Yun, J. E. Reitz, R. D. Numerical Parametric Study of Diesel Engine Operation with Gasoline Combustion Science and Technology 2008 181 2 350 378
  25. Kokjohn, S. Swor, T. Andrie, M. Reitz, R. “Experiments and Modeling of Adaptive Injection Strategies (AIS) in Low Emissions Diesel Engines,” SAE Int. J. Engines 2 1 16 32 2009 10.4271/2009-01-0127
  26. Hiroyasu, H. Kadota, T. “Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines,” SAE Technical Paper 760129 1976 10.4271/760129
  27. Sun, Y. Diesel Combustion Optimization and Emissions Reduction using Adaptive Injection Strategies (AIS) with Improved Numerical Models PhD Thesis in Mechanical Engineering University of Wisconsin - Madison 2007
  28. Munnannur, A. Droplet Collision Modeling in Multi-Dimensional Engine Spray Computations PhD Thesis in Mechanical Engineering University of Wisconsin-Madison 2007
  29. O'Rourke, P. Amsden, A. “A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model,” SAE Technical Paper 2000-01-0271 2000 10.4271/2000-01-0271
  30. O'Rourke, P. Amsden, A. “A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines,” SAE Technical Paper 961961 1996 10.4271/961961
  31. Reitz, R. D. Hanson, R. M. Splitter, D. A. Kokjohn, S. L. High-Efficiency, Ultra-Low Emission Combustion in a Heavy-Duty Engine Via Fuel Reactivity Control 15th Diesel Engine-Efficiency and Emissions Research (DEER) Conference Dearborn, MI Aug. 3 2009
  32. Shi, Y. Reitz, R. “Study of Diesel Engine Size-Scaling Relationships Based on Turbulence and Chemistry Scales,” SAE Technical Paper 2008-01-0955 2008 10.4271/2008-01-0955
  33. Dec, J. Yang, Y. “Boosted HCCI for High Power without Engine Knock and with Ultra-Low NOx Emissions - using Conventional Gasoline,” SAE Int. J. Engines 3 1 750 767 2010 10.4271/2010-01-1086
  34. Eng, J. “Characterization of Pressure Waves in HCCI Combustion,” SAE Technical Paper 2002-01-2859 2002 10.4271/2002-01-2859
  35. McBride, B. Gordon, S. Computer Program for Calculation of Complex Chemical Equilibrium Compositions, Rocket Performance, Incident and Reflected Shocks, and Chapman-Jouguet Detonations 1971 NASA SP-273
  36. Montgomery, D. Design and Analysis of Experiments 5 th John Wiley and Sons New York 2001
  37. Tess, M. Lee, C. Reitz, R. “Diesel Engine Size Scaling at Medium Load without EGR,” SAE Int. J. Engines 4 1 2007 2023 2011 10.4271/2011-01-1386
  38. Hanson, R. Kokjohn, S. Splitter, D. Reitz, R. “Fuel Effects on Reactivity Controlled Compression Ignition (RCCI) Combustion at Low Load,” SAE Int. J. Engines 4 1 408 425 2011 10.4271/2011-01-0361
  39. Splitter, D. Hanson, R. Kokjohn, S. Reitz, R. “Reactivity Controlled Compression Ignition (RCCI) Heavy-Duty Engine Operation at Mid-and High-Loads with Conventional and Alternative Fuels,” SAE Technical Paper 2011-01-0363 2011 10.4271/2011-01-0363

Cited By

Recommended Content

Technical Paper Reactivity Controlled Compression Ignition (RCCI) Heavy-Duty Engine Operation at Mid-and High-Loads with Conventional and Alternative Fuels
Technical Paper A Novel CFD Approach for an Improved Prediction of Particulate Emissions in GDI Engines by Considering the Spray-Cooling on the Piston
Technical Paper A Devoloped Model for Emissions Prediction of a DI Diesel Engine