Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Loading Path Dependence of Forming Limit Diagram of a TRIP800 Steel

Journal Article
2011-01-0019
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2011-01-0019
Published April 12, 2011 by SAE International in United States
Loading Path Dependence of Forming Limit Diagram of a TRIP800 Steel
Sector:
Citation: Choi, K., Soulami, A., Liu, W., Sun, X. et al., "Loading Path Dependence of Forming Limit Diagram of a TRIP800 Steel," SAE Int. J. Mater. Manuf. 4(1):75-83, 2011, https://doi.org/10.4271/2011-01-0019.
Language: English

References

  1. Choi, K. S. Soulami, A. Liu, W. N. Sun, X. Khaleel, M. A. 2010 Influence of various material design parameters on deformation behaviors of TRIP steels Computational Materials Science 50 720 730
  2. Stringfellow, R. G. Parks, D. M. Olson, G. B. 1992 A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels Acta Metallurgica Materialia 40 1703 1716
  3. Reisner, G. Werner, E. A. Fischer, F.D. 1998 Micromechanical modeling of martensitic transformation in random microstructures International Journal of Solids and Structures 35 2457 2473
  4. Iwamoto, T. Tsuta, T. 2000 Computational simulation of the dependence of the austenitic grain size on the deformation behavior of TRIP steels International Journal of Plasticity 16 791 804
  5. Han, H. N. Lee, C. G. Oh, C.-S. Lee, T.-H. Kim, S.-J. 2004 A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steel Acta Materialia 52 5203 5214
  6. Choi, K. S. Liu, W. N. Sun, X. Khaleel, M. A. Ren, Y. Wang, Y. D. 2008 Advanced micromechanical model for transformation-induced plasticity steels with application of in-situ high-energy X-ray diffraction method Metallurgical and Materials Transactions A 39 3089 3096
  7. Choi, K. S. Liu, W. N. Sun, X. Khaleel, M. A. 2009 Microstructure-based constitutive modeling of TRIP steel - Prediction of ductility and failure modes under different loading conditions” Acta Materialia 57 2592 2604
  8. Sun, X. Choi, K. S. Liu, W. N. Khaleel, M. A. 2009 Predicting failure modes and ductility of dual phase steels using plastic strain localization International Journal of Plasticity 25 1888 1909
  9. Sun, X. Choi, K. S. Soulami, A. Liu, W. N. Khaleel, M. A. 2009 On key factors influencing ductile fractures of dual phase (DP) steels Materials Science and Engineering A 526 140 149
  10. Stoughton, T. B. 2000 A general forming limit criterion for sheet metal forming International Journal of Mechanical Sciences 42 1 27
  11. Stoughton, T. B. 2001 Stress-based forming limits in sheet-metal forming Journal of Engineering Materials and Technology 123 417 422
  12. Stoughton, T. B. Zhu, X. 2004 Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD International Journal of Plasticity 20 1463 1486
  13. Wu, P. D. Graf, A. MacEwen, S. R. Lloyd, D. J. Jain, M. Neale, K. W. 2005 On forming limit stress diagram analysis International Journal of Solids and Structures 42 2225 2241
  14. Butuc, M. C. Gracio, J. J. Barata da Rocha, A. 2006 An experimental and theoretical analysis on the application of stress-based forming limit criterion International Journal of Mechanical Sciences 48 414 429
  15. Yoshida, K. Kuwabara, T. Kuroda, Mitsutoshi 2007 Path-dependence of the forming limit stresses in a sheet metal International Journal of Plasticity 23 361 384
  16. Yoshda, K. Kuwabara, T. 2007 Effect of strain hardening behavior on forming limit stresses of steel tube subjected to nonproportional loading paths International Journal of Plasticity 23 1260 1284
  17. Yoshida, K. Suzuki, N. 2008 Forming limit stresses predicted by phenomenological plasticity theories with anisotropic work-hardening behavior International Journal of Plasticity 24 118 139
  18. Wang, H. B. Wan, M. 2009 Forming limit of sheet metals based on mixed hardening model Science in China Series E: Technological Sciences 52 1202 1211
  19. Jia, N. Cong, Z. H. Sun, X. Cheng, S. Nie, Z. H. Ren, Y. Liaw, P. K. Wang, Y. D. 2009 An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels Acta Materialia 57 3965 3977
  20. Radu, M. Valy, J. Gourgues, A. F. Le Strat, F. Pineau, A. 2005 Continuous magnetic method for quantitative monitoring of martensitic transformation in steels containing metastable austenite Scripta Materialia 52 525 530
  21. Shan, T. K. Li, S. H. Zhang, W. G. Xu, Z. G. 2008 Prediction of martensitic transformation and deformation behavior in the TRIP steel sheet forming Materials and Design 29 1810 1816
  22. Konieczny, A. A. 2003 Advanced high strength steels formability Seminar on Great Design in Steels Livonia, MI February 19
  23. Uthaisangsuk, V. Prahl, U. Bleck, W. 2009 Characterisation of formability behaviour of multiphase steels by micromechanical modelling International Journal of Fracture 157 55 69
  24. Lee, C. G. Kim, S.-J. Lee, T.-H. Lee, S. 2004 Effects of volume fraction and stability of retained austenite on formability in a 0.1C-1.5Si-1.5Mn-0.5Cu TRIP-aided cold-rolled steel sheet Materials Science Engineering A 371 16 23

Cited By

Recommended Content

Journal Article A Mixed-Mode Fracture Criterion for AHSS Cracking Prediction at Large Strain
Technical Paper InCar - Advanced High Strength Steel Tailored Tube Longitudinal Members
Technical Paper The Effect of Process Variables on Sheet Metal Springback