This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Mixed-Mode Fracture Criterion for AHSS Cracking Prediction at Large Strain

Journal Article
2011-01-0007
ISSN: 1946-3979, e-ISSN: 1946-3987
Published April 12, 2011 by SAE International in United States
A Mixed-Mode Fracture Criterion for AHSS Cracking Prediction at Large Strain
Sector:
Citation: Zhu, H. and Zhu, X., "A Mixed-Mode Fracture Criterion for AHSS Cracking Prediction at Large Strain," SAE Int. J. Mater. Manuf. 4(1):10-26, 2011, https://doi.org/10.4271/2011-01-0007.
Language: English

References

  1. ABAQUS 2008 Analysis User's Manual Volume III: Materials, Version 6.8
  2. Anderson, T.L. 1991 “Fracture Mechanics: Fundamentals and Application” CRC Press
  3. Argon, A.S. Im, J. Safoglu, R. 1975 “Cavity formation from inclusions in ductile fracture” Metallurgical Transactions 6A 825 837
  4. Atkins, A.G. 1996 “Fracture informing” Journal of Material Processing Technology 56 609 618
  5. Bai, Y. 2008 “Effect of loading history on necking and fracture” Ph.D. dissertation Dept. of Mechanical Engineering, MIT
  6. Bao, Y. 2003 “Prediction of ductile crack formation in uncracked bodies” Ph.D. dissertation Dept. of Ocean Engineering, MIT
  7. Bouaziz, O. Douchamps, S. Lurrenberger, D. Bui-Van, A. 2010 “The double bending test: a promising new way for an optimal characterization of cut-edges ductility” IDDRG 2010 conference proceeding Graz, Austria
  8. Boul, I. Lang, M Mees, G. Sponem, F. Sturel, T Garat, X. 2007 “Bending test and bendability of ultra high strength steels” IDDRG 2007 conference proceeding
  9. Buyuk, M. Bois, P.D. He, J. Kan, S. 2008 “An overview on the material tabulated viscoplasticity MAT_224” Report of FHWA / NHTSA Crash Analysis Center George Washington University
  10. Cao, J. Yao, H. Karafillis, A. Boyce, M.C. 2000 “Prediction of localized thinning in sheet metal using a general anisotropic yield criterion” Int. J. of Plasticity 16 1105 1129
  11. Chen, X. Shi, M.F. Shih, H.-C. Luo, M. et al. “AHSS Shear Fracture Predictions Based on the Recently Developed Fracture Criterion,” SAE Int. J. Mater. Manuf. 3 1 723 731 2010 10.4271/2010-01-0988
  12. Christensen, R. M. 2007 “A comprehensive theory of yielding and failure for isotropic materials” ASME Journal of Engineering Materials and Technology 129 173 181
  13. Cirak, F. Ortiz, M. Pandolfi, A. 2005 “A cohesive approach to thin-shell fracture and fragmentation” Comput. Methods Appl. Mech. Engrg. 194 2604 2618
  14. Dell, H. Gese, H. Oberhofer, G. 2006 CrachFEM 3.07 User's Manual MATFEM
  15. Goncalves, J. Zani, E. 2010 “Knowledge synthesis report about MATFEM models including developed in-house methodologies to identify the parameters” ArcelorMittal Global R & D technical report
  16. Gurson, A.L. 1977 “Continuum theory of ductile rupture by void nucleation and growth: Part 1 - yield criteria and flow rules for porous ductile media” ASME Journal of Engineering Materials and Technology 99 2 15
  17. Hao, S. Liu, W.K. Moran, B. Vernerey, F. Olson, G.B. 2004 “Multiscale constitutive model and computational framework for the design of ultrahigh strength, high toughness steels” Comput. Methods Appl. Mech. Engrg. 193 1865 1908
  18. Hertzberg, R.W. 1996 “Deformation and Fracture Mechanics of Engineering Materials” 4th John Wiley & Sons, Inc.
  19. Hasegawa, K. Kawamura, K Urabe, T. Hosoya, Y. 2004 “Effect of micro structure on stretch-flange-formability of 980 MPa grade cold-rolled ultra high strength steel sheets” ISIJ International 44 3 603 609
  20. Hora, P. 2006 “Advanced constitutive models as precondition for an accurate FEM-simulation in forming application” LS-DYNA Anwenderform UIM 2006
  21. Hosford, W.F. Caddell, R.M. 1983 “Metal Forming: Metallurgy and Mechanics” Prentice-Hall
  22. Hooputra, H. Gese, H. Dell, H. Werner, H. 2004 “A comprehensive failure model for crashworthiness simulation of aluminum extrusion” International Journal of Crashworthiness 9 449 463
  23. Huang, G. Yan, B. Zhu, H. “Measurement of Fracture Strains for Advanced High Strength Steels (AHSS) Using Digital Image Correlation,” SAE Int. J. Mater. Manuf. 2 1 482 486 2009 10.4271/2009-01-1174
  24. Huang, G. Yan, B. Zhu, H. 2009 2 “Advanced fracture characterization of AHSS” ArcelorMittal Global R & D Research Report
  25. Huang, G. Zhu, H. Yan, B. Chintamani, J. 2010 ArcelorMittal-Honda joint project report for sheared edge cracking prediction, part II
  26. Huang, M. 2008 “On the failure of AHSS at tooling radius” Proceedings of Numisheet conference
  27. Huang, M. 2008 “The Maximum Bending Angle and Minimum Bending Radius of TRIP780GA” ArcelorMittal Global R & D - East Chicago Research Report
  28. Johnson, G.R. Cook, W.H. 1985 “Fracture characteristics of three metals subjected to various strain, strain rate, temperatures” International Journal of Engineering Fracture Mechanics 21 31 48
  29. Karelova, A. Krempaszky, C. Werner, E. Tpsipouridis, P. Tragl, E. Pichler, A. 2006 “Deformation behavior of dual-phase steels under various loading conditions; Mechanisms leading to failure” International Symposium on Advanced High Strength Steels for the Ground Transportation Industry MS & T 2006
  30. Keeler, S.P. Backhofen, W.A. 1964 “Plastic instability and fracture in sheet stretched over rigid punches” ASM Transactions Quarterly 56 25 48
  31. Kim, J-H Sung, J-H Wagoner, R.H. 2009 “Thermo-mechanical modeling of draw-bend formability tests” Proceeding of International Deep Drawing Research Group Conference
  32. Kircher, D. Bouaziz, O. Cornette, D. Tiffon, G. 2009 “Continuous measurement of strain in the V-bending test: links between bendability and tensile properties” AreclorMittal Global R & D Research Highlights of Oct.
  33. Kircher, D. Goncalves, J. Jousserand, P. Blonde, H. 2009 “State of the art on ArcelorMittal knowledge about cut-edge-behaviour” Capitalization report of ArcelorMittal Global R&D
  34. Koyanagi, K. Motomura, K. 2006 “Simple prediction method for the edge fracture of steel sheet during vehicle collision” LS-DYNA Anwenderforum UIM 2006
  35. Lee, S. 2005 “Microstructural Influences on the Fracture Behavior of Multi-Phase Sheet Steels” Ph.D. Dissertation Colorado School of Mines
  36. Lee, Y-W. 2004 “Fracture Predictions in Metal Sheets” Ph.D. dissertation Dept. of Ocean Engineering, MIT
  37. Lemaitre, J. 1996 “A Course on Damage Mechanics” 2nd Springger
  38. Liu, W-K McVeigh, C. 2008 “Predictive multiscale theory for design of heterogenous materials” Computational Mechanics 42 147 170
  39. Marciniak, Z. Kuczinski, K. 1967 “Limit strains in the process of stretch forming sheets metal” Int. J. Mech. Sci. 9 609 620
  40. Marciniak, Z. Kuczynski, K. Pokora, T. 1973 “Influence of the plastic properties of a material on the forming limit diagram for sheet metal intension” Int. J. of Mechanical Sciences 15 789 805
  41. Marciniak, Z. Duncan, J.L. 1992 “The Mechanics of Sheet Metal Forming” Edward Arnold
  42. Mendelson, A. 1968 “Plasticity: Theory and Application” The Macmilian Company
  43. Needleman, A. 1987 “A continuum model for void nucleation by inclusion debonding” Journal of Applied Mechanics 54 525 531
  44. Obayashi, K. Natori, S. Ono, M. Ueda, T. 2009 MIT AHSS fracture consortium annual meeting presentation
  45. Ramisetti, N. Huang, L. Huang, G. Yan, B. Chintamani, J. 2010 “Fracture of cut edges for AHSS, part I: microscopic analysis” ArcelorMittal-Honda joint-project report
  46. Reche, D. Sturel, T. 2009 “Study of damage mechanisms of UHSS in bending Application to a TRIP steel” ArcelorMittal Global R & D Research Highlights Dec.
  47. Roy, G. Embury, J.D. Edwards, G. Ashby, M.F. 1981 “A model of ductile fracture based on the nucleation and growth of voids” Acta Metallurgical 29 1509 1522
  48. Sadagopan, S. Yao, H. 2008 “Characterization of bending dominated fractures during forming of advanced high strength steels” Internal Research Report ArcelorMittal Global R&D-East Chicago
  49. Sriram, S. Zhu, H. Yan, B. “Experiences with Experimental Determination of the Yield Locus and Its Evolution for Advanced High Strength Steels,” SAE Int. J. Mater. Manuf. 3 1 658 669 2010 10.4271/2010-01-0976
  50. Schemitt, J.H. Jalinier, J.M. 1982 “Damage in sheet metal forming -I. physical behavior” Acta Metallurgical 30 1789 1798
  51. Shawki, T.G. 1990 “The Mathematical Theory of Fracture” Dept. of TAM, University of Illinois Urbana-Champaign
  52. Shawki, T.G. 1992 “The phenomenon of shear strain localization in dynamic viscoplasticity” Applied Mechanics Review 45
  53. Tvergaad, V. Needleman, A. 1984 “Analysis of the cup-cone fracture in a round tensile bar” Acta Metallurgical 32 157 169
  54. Tvergaard, V. Hutchinson, J. W. 1992 “The relation between crack growth resistance and fracture process parameters in elastic-plastic solids,” Journal of the Mechanics and Physics of Solids 40 1377 1397
  55. Wang, N.-M. Johnson, L.K. Tang, S.C. 1984 “Stretch flanging of V-shaped sheet metal blanks” Journal of Applied Metalworking 281 291
  56. Wierzbicki, T. Bao, Y. Lee, Y. Bai, Y. 2005 “Calibration and evaluation of seven fracture models” International Journal of Mechanical Science 47 719 743
  57. Wilkins, M.L. Streit, R.D. Reaugh, J.E. 1980 “Cumulative-strain-damage model of ductile fracture: simulation and prediction of engineering fracture tests, ucrl-53058” Technical report Lawrence Livermore Laboratory Livermore, California
  58. Xia, C. et al 2009 “Nonlinear strain path behavior” Proposal to DOE through USAMP program
  59. Xue, Z. Vaziri, A. Hutchinson, J.W. 2008 “Material aspects of dynamical neck retardation” Journal of the Mechanics and Physics of Solids 56 93 113
  60. Yan, B. Kantner, C. Zhu, H. Nadkarni, G. et al. “Evaluation of Crush Performance of a Hat Section Component Using Dual Phase and Martensitic Steels,” SAE Technical Paper 2005-01-0837 2005 10.4271/2005-01-0837
  61. Zhou, D. Du, C. Siekirk, J. McGuire, J. et al. “A Practical Failure Limit for Sheared Edge Stretching of Automotive Body Panels,” SAE Technical Paper 2010-01-0986 2010 10.4271/2010-01-0986
  62. Zhou, B. Thouless, M.D. Ward, S.M. 2006 “Predicting the failure of ultrasonic spot welds by pull-out from Sheet Metal,” International Journal of Solids and Structures 43 7482 7500
  63. Zhu, H. Sriram, S. Yan, B. Duroux, P. “Advanced Material Characterizations and Constitutive Modeling for AHSS Springback Predictions,” SAE Int. J. Mater. Manuf. 3 1 691 701 2010 10.4271/2010-01-0980
  64. Zuidema, B. Adam, H. “ULSAB-Advanced Vehicle Concepts: Safety/Crash Management,” SAE Technical Paper 2002-01-0638 2002 10.4271/2002-01-0638

Cited By