This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Proof-of-Principle Investigation into the Use of Custom Rapid Aging Procedures to Evaluate and Demonstrate Catalyst Durability

Journal Article
2010-01-2269
ISSN: 1946-3952, e-ISSN: 1946-3960
Published October 25, 2010 by SAE International in United States
Proof-of-Principle Investigation into the Use of Custom Rapid Aging Procedures to Evaluate and Demonstrate Catalyst Durability
Sector:
Citation: Shao, H., Plaatje, A., and Meffert, M., "Proof-of-Principle Investigation into the Use of Custom Rapid Aging Procedures to Evaluate and Demonstrate Catalyst Durability," SAE Int. J. Fuels Lubr. 3(2):963-981, 2010, https://doi.org/10.4271/2010-01-2269.
Language: English

References

  1. Heck, R.M. Farrauto, R.J. Gulati, S.T. “Catalytic Ari Pollution Control: Commercial Technology” 3rd edition John Willey & Sons. Inc. 2009
  2. Zhang, Y.T. Cheng, W.K. “Fuel Sulfur and Aging Effects on the Oxygen Storage Capacity in Three-Way Catalytic Converters,” SAE Technical Paper 2003-01-1874 2003 10.4271/2003-01-1874
  3. Brinkmeter, C. Elgenberger, G. Buchner, S. Donnerstag, A. “Transient Emissions of a SULEV Catalytic Converter System Dynamic Simulation vs. Dynamometer Measurements,” SAE Technical Paper 2003-01-1001 2003 10.4271/2003-01-1001
  4. Takana, H Fujikawa, H. Takahashi, I. “Excellent Oxygen Storage Capacity of Perovskite-PD Three Way Catalysts,” SAE Technical Paper 950256 1995 10.4271950256
  5. Hori, C.E. Ng, K.Y.S. Brenner, A. Rahmoeller, K.M. Belton, D. “The Effects of Aging Temperature and Aging Time on the Oxygen Storage Capacity of Pt-Rh/CeZrO2 Catalysts,” Braz. J. Chem. Eng. 18 1 2001
  6. Eckhoff, S. Mueller, W. Lindner, D. Leyrer, J. Kreuzer, T. Vent, G. Schoen, C. Schmidt, J. Franz, J. “Catalyst Design for High Performance Engines Capable to Fulfill Future Legislation,” SAE Technical Paper 2004-01-1276 2004 10.4271/2004-01-1276
  7. Ball, D.J. Kirby, C.W. “A Survey of Automobile Catalyst Technologies Using Rapid Aging Test Schedules Which Incorporate Engine Oil Derived Poisons,” SAE Technical Paper 973050 1997 10.4271/973050
  8. Kumar, S. Ferrari, V. Burk, P.L. Deeba, M. Rogalo, J. “Influence of Phosphorus Poisoning on TWC Catalysts,” 2003-01-3735 2003 10.4271/2003-01-3735
  9. Xu, L. McCabe, R. W. Hubbard, C. P. Dennis, R. M. Tabron, J. M. Norman, K. R. “Impact of Oil Consumption Modes and Pathways on Oil-Derived Catalyst Deposits,” SAE Technical Paper 2007-01-1072 2007 10.4271/2007-01-1072
  10. Vehicle Recalls http://www.epa.gov/otaq/recall.htm
  11. Fast, K.L. “Assessing the Durability of Vehicle Emissions Systems: A Survey of Emission Component-Related Defect Reports in North America,” 37 ELR 10385 2007
  12. Chan, H.A “Accelerated Stress Testing Handbook: Guide for Achieving Quality Products,” John Wiley & Sons 2001
  13. Porter, A. J. “Failure Mode Verification Testing: Applying Highly Accelerated Life Testing Methods to Mechanical Systems,” SAE Technical Paper 982403 1998 10.4271/982403
  14. Ruetten, O. Pischinger, S. Küpper, C. Weinowski, R. Gian, D. Ignatov, D. Betton, W. Bahn, M. “Catalyst Aging Method for Future Emissions Standard Requirements,” SAE Technical Paper 2010-01-1272 2010 10.4271/2010-01-1272
  15. Webb, C.C. Bartley, G.J.J. Bykowski, B.B. Fransworth, G. Riley, M. “Catalyst Aging Evaluation with Exposure to 0.06 and 0.11 Percent Phosphorus Oils Using the FOCAS Burner System,” SAE Technical Paper 2003-01-1999 2003 10.4271/2003-01-1999
  16. Hepburn, J.S. Gandhi, H.S. “The Relationship Between Catalyst Hydrocarbon Conversion Efficiency and Oxygen Storage Capacity,” SAE Technical Paper 920831 1992 10.4271/920831
  17. Environmental Protection Agency Federal Register 40 CFR part 86 “Emission Durability Procedures for New Light-Duty Vehicles, Light-Duty Trucks and Heavy-Duty Vehicles,” January 17 2006
  18. “Manufacturer Guidance on Compliance Demonstration with the Emission Durability Procedures and Regulations,” April 4 2007
  19. Commission Regulation (EC) 692/2008 July 18 2008
  20. 2008 Model Year Equivalency Factors http://www.epa.gov/otaq/regs/ld-hwy/durability/420b10021.pdf
  21. Painter, L. J. Rutherford, J.A. “Statistical Design and Analysis Methods for the Auto/Oil Air Quality Research Program” SAE 920319 1992
  22. Hughes, K.W. “Effect of Thermal Mass and Aging on CO-NOx Crossover and Light Off Behavior,” SAE 2005-01-1106 2005
  23. Hughes, K.W. “Effect of Thermal Mass on Aging and Emissions Performance,” SAE Technical Paper 2004-01-1492 2004 10.4271/2004-01-1492

Cited By