Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Spray and Combustion Characteristics of Ethanol Blended Gasoline in a Spray Guided DISI Engine under Lean Stratified Operation

Journal Article
2010-01-2152
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2010-01-2152
Published October 25, 2010 by SAE International in United States
Spray and Combustion Characteristics of Ethanol Blended Gasoline in a Spray Guided DISI Engine under Lean Stratified Operation
Sector:
Citation: Oh, H., Bae, C., and Min, K., "Spray and Combustion Characteristics of Ethanol Blended Gasoline in a Spray Guided DISI Engine under Lean Stratified Operation," SAE Int. J. Engines 3(2):213-222, 2010, https://doi.org/10.4271/2010-01-2152.
Language: English

References

  1. Fraidl, G.K. Piock, W.F. Wirth, M. “Gasoline Direct Injection: Actual Trend and Future Strategies for Injection and Combustion Systems,” SAE Technical Paper 960465 1996 10.4271/960465
  2. Zhao, F. Harrington, D.L. Lai, M.-C.D. “Automotive Gasoline Direct-Injection Engines,” SAE International Warrendale, PA 978-0-7680-0882-1 2002 10.4271/978-0-7680-0882-1
  3. VanDerWege, B.A. Han, Z. Iyer, C.O. Munõz, R.H. et al. “Development and Analysis of a Spay-Guided DISI Combustion System Concept,” SAE Technical Paper 2003-01-3105 2003 10.4271/2003-01-3105
  4. Bechtold, R.L. “Alternative Fuels Guidebook,” SAE International Warrendale, PA 978-0-7680-0052-8 1997 10.4271/978-0-7680-0052-8
  5. Cairns, A. Stansfield, P. Fraser, N. Blaxill, H. et al. “A Study of Gasoline-Alcohol Blended Fuels in an Advanced Turbocharged DISI Engine,” SAE Int. J. Fuels Lubr. 2 1 41 57 2009 10.4271/2009-01-0138
  6. Milpied, J. Jeuland, N. Plassat, G. Guichaous, S. et. al. “Impact of Fuel Properties on the Performances and Knock Behaviour of a Downsized Turbocharged DISI Engine - Focus on Octane Numbers and Latent Heat of Vaporization,” SAE Int. J. Fuels Lubr. 2 1 118 126 2009 10.4271/2009-01-0324
  7. Achleitner, E. Bäcker, H. Funaioli, A. “Direct Injection Systems for Otto Engines,” SAE Technical Paper 2007-01-1416 2007 10.4271/2007-01-1416
  8. Hemdal, S. Denbratt, I. Dahlander, P. Wärnberg, J. “Stratified Cold Start Sprays of Gasoline-Ethanol Blends,” SAE Int. J. Fuels Lubr. 2 1 683 696 2009 10.4271/2009-01-1496
  9. Davy, M.H. Williams, P.A. Anderson, R.W. “Effects of Fuel Composition on Mixture Formation in a Firing Direct-Injection Spark-Ignition (DISI) Engine: An Experimental Study using Mie-Scattering and Planar Laser-Induced Fluorescence (PLIF) Techniques,” SAE Technical Paper 2000-01-1904 10.4271/2000-01-1904
  10. Stevens, R. E. Ma, H. Stone, C. R. Walmsley, H. L. Cracknell, R. “On planar laser-induced fluorescence with multi component fuel and tracer design for quantitative determination of fuel concentration in IC engines,” proc. IMechE Vol.220 part D: J. Automobile Engineering 2005
  11. Persson, H. Sjöholm, J. Kristensson, E. Johansson, B. et al “Study of Fuel Stratification on Spark Assisted Compression Ignition (SACI) Combustion with Ethanol Using High Speed Fuel PLIF,” SAE Technical Paper, 2008-01-2401 2008 10.4271/2008-01-2401
  12. Han, D. Steeper, R.R. “Examination of Isooctane/Ketone Mixtures for Quantitative LIF Measurements in a DISI Engine,” SAE Technical Paper 2002-01-0837 2002 10.4271/2002-01-0837
  13. Hemdal, S. Denbratt, I. Dahlander, P. Wärnberg, J. “Stratified Cold Start Sprays of Gasoline-Ethanol Blends,” SAE Int. J. Fuels Lubr. 2 1 583 696 2009 10.4271/2009-01-1496
  14. Kaes, G. L “Refinery Process Modeling,” The Athens Printing Company 2000
  15. Sankar, S. V. Maher, K. E. Robart, D. M. Bachalo, W. D. “Rapid Characterization of Fuel Atomizers Using an Optical Patternator,” J. Eng. Gas Turb. Power 121 409 414 1999
  16. Sauter, W. Pfeil, J. Velji, A. Spicher, U. et al “Application of Particle Image Velocimetry for Investigation of Spray Characteristics of an Outward Opening Nozzle for Gasoline Direct Injection,” SAE Technical Paper 2006-01-3377 2006 10.4271/2006-01-3377
  17. Heywood, J. B. “International Combustion Engine Fundamentals,” McGraw-Hill 1988
  18. Marinov, Nick “A Detailed Chemical Kinetic Model for High Temperature Ethanol Oxidation,” Int. J. Chem. Kinet. 21 183 220 1999
  19. Bayraktar, H. “Theoretical invetigation of flame propagation process in an SI engine running on gasoline-ethanol blends,” Renewable energy 32 758 771 2007
  20. Sandquist, H. Lindgren, R. Denbratt, I. “Sources of Hydrocarbon Emissions from a Direct Injection Stratified Charge Spark Ignition Engine,” SAE Technical Paper 2000-01-1906 2000 10.4271/2000-01-1906
  21. Song, K. H. Nag, P. Litzinger, T. A. Haworth, D. C. “Effect of oxygenated additives on aromatic species in fuel-rich, premixed ethane combustion : a modeling study,” Combustion and Flame 135 2003 341 349 2003

Cited By

Recommended Content

Technical Paper Impact of Ethanol and Isobutanol Gasoline Blends on Emissions from a Closed-Loop Small Spark-Ignited Engine
Journal Article Issues with T50 and T90 as Match Criteria for Ethanol-Gasoline Blends
Technical Paper Influence of the Injection Pressure on the Combustion Performance and Emissions of Small GDI Engine Fuelled with Bio-Ethanol