This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Innovations In Experimental Techniques For The Development of Fuel Path Control In Diesel Engines
Journal Article
2010-01-1132
ISSN: 1946-3952, e-ISSN: 1946-3960
Sector:
Topic:
Citation:
Winward, E., Deng, J., and Stobart, R., "Innovations In Experimental Techniques For The Development of Fuel Path Control In Diesel Engines," SAE Int. J. Fuels Lubr. 3(1):594-613, 2010, https://doi.org/10.4271/2010-01-1132.
Language:
English
References
- Tonetti, A “ Advanced Diesel Control ” Presentation to Toptec Meeting on Electronic Engine Control Society of Automotive Engineers Turin 2003
- McNeil, S. Adamovicz, P. Lieder, F. “Bosch Motronic MED9.6.1 EMS Applied on a 3.6L DOHC 4V V6 Direct Injection Engine,” SAE Technical Paper 2008-01-0133 2008
- Guerrier, M. Cawsey, P. “The Development of Model Based Methodologies for Gasoline IC Engine Calibration,” SAE Technical Paper 2004-01-1466 2004
- Viele, M. Stein, L. Gillespie, M. Hoekstra, G. “A Pc and FPGA Hybrid Approach to Hardware-In-The-Loop Simulation,” SAE Technical Paper 2004-01-0904 2004
- Cummings, R. “ Tool Integration from Design to Test ” Society of Automotive Engineers, Paper 2003-01-1204
- Corti, E. Cazzoli, G. Rinaldi, M. Solieri, L. “ Fast Prototyping of a Racing Diesel Engine Control System ” Society of Automotive Engineers, Paper 2008-01-2942
- Schiefer, D. Maennel, R. Nardoni, W. “Advantages of Diesel Engine Control Using In-Cylinder Pressure Information for Closed Loop Control,” SAE Technical Paper 2003-01-0364 2003
- Liebig, D. Krane, W. Ziman, P. Garbe, T. et al. “The Response of a Closed Loop Controlled Diesel Engine on Fuel Variation,” SAE Technical Paper 2008-01-2471 2008
- Aranki, N. Tawel, R. “FPGA Platform for Prototyping and Evaluation of Neural Network Automotive Applications ” http://trs-new.jpl.nasa.gov/dspace/bitstream/2014/8615/1/02-1183.pdf 30th September 2009
- deBotton, G. Sher, E. Frenkel, E. Rivin, B. et al. “Online Detection of Cylinder-to-Cylinder Variations by a Vibration Analysis System,” SAE Technical Paper 2002-01-0848 2002
- Pinson, J “ Bringing the Low NOx Diesel Under Control ” 2006 DEER Conference Detroit
- Asad, U. Zheng, M. “Real-time Heat Release Analysis for Model-based Control of Diesel Combustion,” SAE Technical Paper 2008-01-1000 2008
- Tan, Y Zheng, M Reader, G.T. Han, X et al. “An Enabling Study of Diesel Low Temperature Combustion via Adaptive Control,” SAE Int. J. Engines 2 1 750 763 2009
- Zheng, M. Kumar, R. Tan, Y. Reader, G.T. “Heat Release Pattern Diagnostics to Improve Diesel Low Temperature Combustion,” SAE Int. J. Fuels Lubr. 1 1 1242 1258 2008
- Maciejowski, J. M. “ Predictive control with constraints ” Prentice Hall
- Müller, W. Ölschlegel, H. Schäfer, A. Hakim, N. et al. “Selective Catalytic Reduction - Europe's NOx Reduction Technology,” SAE Technical Paper 2003-01-2304 2003
- Wang, D.Y. Yao, S. Shost, M. Yoo, J. et al. “Ammonia Sensor for Closed-Loop SCR Control,” SAE Int. J. Passeng. Cars – Electron. Electr. Syst. 1 1 323 333 2008
- Willems, F. Cloudt, R. van den Eijnden, E. van Genderen, M. et al. “Is Closed-Loop SCR Control Required to Meet Future Emission Targets?,” SAE Technical Paper 2007-01-1574 2007
- Song, Q. Zhu, G. “Model-based Closed-loop Control of Urea SCR Exhaust Aftertreatment System for Diesel Engine,” SAE Technical Paper 2002-01-0287 2002
- Bengtsson, J. Strandh, P. Johansson, R. Tunestal, P. et al. “Multi-Output Control of a Heavy Duty HCCI Engine Using Variable Valve Actuation and Model Predictive Control,” SAE Technical Paper 2006-01-0873 2006
- Kämmer, A. Liebl, J. Krug, C. Munk, F. et al. “Real-Time Engine Models” SAE Technical Paper 2003-01-1050 2003
- Maxfield, C. “ FPGAs gear up for new automotive application ” EETimes Oct 16 2007
- Biran, D. “ The evolution of FPGAs, from prototype to production ” Altera http://www.dsp-fpga.com/articles/id/?2901 30th September 2009
- Xilinx “ Revolutionary Architecture for the Next Generation Platform FPGAs ” Embargoed News December 8 2003
- Chujo, N. “ Fail-Safe ECU System Using Dynamic Reconfiguration of FPGA ” R & D Review of Toyota CRDL 37 2
- Sharma, S. Chen, W. “Using Model-Based Design to Accelerate FPGA Development for Automotive Applications SAE Int. J. Passeng. Cars - Mech. Syst. 2 1 150 158 2009
- Horgan, J. “Hardware/Software Coverification Dr. Jack Horgan March 29 2004 http://www10.edacafe.com/nbc/articles/view_weekly.php?newsletter=1&run_date=29-Mar-2004
- Parnell, K.M. “Reconfigurable Vehicle,” SAE Technical Paper 2002-01-0144 2002
- Dase, C. G. Viele, M. “Rapid Prototyping an FPGA-based Engine Controller for a 600cc Super-Sport Motorcycle ” Society of Automotive Engineers, Paper 2005-01-0067
- Aceituna, D. “ Algorithm Design Using LabVIEW ” Society of Automotive Engineers, Paper 2002-01-1465
- Kulkarni, R. Hoekstra, G. “ LabVIEW FPGA in Hardware-in-the-Loop Simulation Applications ” National Instruments Corporation White Paper 2002
- www.drivven.com 30th September 2009
- Corti, E. Solieri, L. “Rapid Control Prototyping System for Combustion Control,” SAE Technical Paper 2005-01-3754 2005
- Corti, E. Moro, D. Minelli, G. Solieri, L. “ Advantages of Using FPGA Components for Innovative Control Systems Implementation on Automotive Engines ” Modena-Motori, High Tech Engines and Cars, 11th International Conference 2005
- Corti, E. Moro, D. Solieri, L. “Real Time Evaluation of IMEP and ROHR-related Parameters,” SAE Technical Paper 2007-24-0068 2007
- Padala, S. Bansal, A. Ramesh, A. “Studies on an Air Assisted Gasoline Direct Injection System for a Two-Stroke Engine,” SAE Technical Paper 2008-28-0048 2008
- He, X. Leslie, A. Halmari, J. Cordaway, A. et al. “Development of Real-Time Control for a Hydrogen Powered Hybrid Electric Vehicle,” SAE Technical Paper 2005-01-0023 2005
- Wilhelmsson, C. Tunestal, P. Johansson, B. “ FPGA Based Engine Feedback Control Algorithms ” Division of Combustion Engines, Faculty of Engineering, Lund University Sweden http://luur.lub.lu.se/luur?func=downloadFile&fileOId=625773 30th September 2009
- Wilhelmsson, C. Tunestal, P. Johansson, B. “ An Ultra High Bandwidth Automotive Rapid Prototype System ” Division of Combustion Engines, Faculty of Engineering, Lund University Sweden http://luur.lub.lu.se/luur?func=downloadFile&fileOId=1033461 30th September 2009
- Piancastelli; L. Grisolia; B. Donnarumma, A. “ An Adaptive Fuzzy Control System For Common Rail Direct Injection ” Università degli Studi di Bologna Italia http://www.ingegraf.es/pdf/titulos/COMUNICACIONES%20ACEPTADAS/P31.pdf 30th September 2009
- Rodriguez, C. Plianos, A. Desai, P. R. Hart, A. Winward, E. Moseley, G. “ Design and Implementation of Model Predictive Control for Air Path Management System of Heavy Duty Diesel Engines ” IET Control Theory and Applications, paper under review
- Patzer, A. “ Overview CANape Mathworks Interconnection ” Vector Informatik GmbH
- Patzer, A. König, G. “ Matlab/Simulink DLLs in CANape 6.5 ” Vector Informatik GmbH
- Patzer, A. “ Control CANape with a Matlab M-File ” Vector Informatik GmbH
- Patzer, A. “ Use of the Matlab/Simulink Model Explorer in CANape 6.5 ” Vector Informatik GmbH
- Guzzella, L. Onder, C.H. “ Introduction to Modeling and Control of Internal Combustion Engine Systems ” Springer Berlin - Germany 2004
- Brahma, A. Upadhyay, D. Serrani, A. Rizzoni, G “ Modeling, identification and state estimation of diesel engine torque and NOx dynamics in response to fuel quantity and timing excitations ” Proceedings of the 2004 American Control Conference 3 2166 2171
- Heywood, J.B. “ Internal Combustion Engines Fundamentals ” McGraw-Hill 2000
- Zhao, H. Ladammatos, N. “Engine Combustion Instrumentation and Diagnostics” SAE International Warrendale, PA 0-7680-0665-1 2001
- Bosch “ Diesel-Engine Management: 4th Edition ” Wiley 2005
- Bosch “ Gasoline-Engine Management: 3rd Edition ” Wiley 2006
- Bosch “ Automotive Handbook ”