This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fuel Vaporizer Catalyst Enables Compact Aftertreatment System Packaging by Reducing Mixing Length
Technical Paper
2010-01-1070
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Stringent space constraints for on and off highway vehicles require compact exhaust aftertreatment system packaging to meet both EPA 2010 and final Tier 4 emission regulations. Development and validation of a compact diesel fuel vaporization and mixing system is the focus of this work. The fuel vaporization and mixing system is comprised of a fuel dosing system, catalytic monolith and mechanical mixer. A fuel reformer, lean NOx trap (LNT), diesel particulate filter (DPF) and a selective catalytic reduction (SCR) catalysts are positioned downstream of the fuel vaporizer system. A 44% reduction in total fuel vaporization / mixing path length was achieved using an optimized injection chamber, catalytic monolith and mixing element. Reformer outlet temperature results confirm that reformer inlet fuel vapor uniformity targets meet design specifications. Similarly, the fuel reformer efficiency using the fuel vaporizer met the design targets within the compact packaging envelope.
Recommended Content
Journal Article | Review of Vehicle Engine Efficiency and Emissions |
Technical Paper | Thermal Management of a Four-way Catalyst System with Alternative Combustions for Achieving Future Emissions Standard |
Journal Article | Vehicular Emissions in Review |
Topic
Citation
Armanini, B. and McCarthy, J., "Fuel Vaporizer Catalyst Enables Compact Aftertreatment System Packaging by Reducing Mixing Length," SAE Technical Paper 2010-01-1070, 2010, https://doi.org/10.4271/2010-01-1070.Also In
References
- McCarthy, J., Jr. Korhumel, T., Jr. Marougy, A. “Performance of a Fuel Reformer, LNT and SCR Aftertreatment System Following 500 LNT Desulfation Events,” SAE Technical Paper 2009-01-2835 2009
- U.S.E.P.A. (United States Environmental Protection Agency) Federal Register - CFR 39216 39219 2004
- McCarthy, J., Jr. Holtgreven, J. “Advanced NOx Aftertreatment System Performance Following 150 LNT Desulfation Events,” SAE Technical Paper 2008-01-1541 2008
- Dykes E.C. “NOx Performance of an LNT+SCR System Designed to Meet EPA 2010: Results of an Engine Dynamometer Tests,” SAE Int. J. Commer. Veh. 1 1 327 337 2008
- Chimner, C. “Transient On-Road Emission Reduction of an LNT & SCR Aftertreatment System,” SAE Int. J. Commer. Veh. 1 1 315 326 2008
- McCarthy, J., Jr. Taylor, W., III “LNT+SCR Systems for Medium-Heavy Duty Application: A Systems Approach,” 13th Diesel Engine-Efficiency and Emission Research Conference August 13-16 2007 Detroit, MI
- Hu, H. Reuter, J. Yan, J. McCarthy, J., Jr. “Advanced NOx Aftertreatment System And Controls For On-Highway Heavy Duty Diesel Engines,” SAE Technical Paper 2006-01-3552 2006
- Schommers, J. Breitbach, H. “A Global Emission Strategy - Bluetec for Diesel Engines,” Auto Technology 48 51 Mar. 2007
- Snow, R. Dobson, D. Hammerle, R. Katare, S. “Robustness of a LNT-SCR System to Aging Protocol,” SAE Technical Paper 2007-01-0469 2007
- Dalla Betta, R. Cizeron, J. “Pre-combustors for internal combustion engines and systems and methods therefore,” 07 10 2007
- Dalla Betta, R. Cizeron, J. Sheridan, D. Davis, T. “Use of a Diesel Fuel Processor for Rapid and Efficient Regeneration of Single Leg NOx Adsorber Systems,” 2003 Diesel Engine Emissions Reduction Conference Aug. 24-28 2003 Newport, RI
- McCarthy, J., Jr. “Simulation Of Fuel-Exhaust Mixing in Exhaust Aftertreatment Systems Using Simplified Spray Models For Pulse-Width Modulated Fuel Injectors,” Journal of Atomization and Sprays 19 5 2009 425 444
- Lim, J. Sivathanu, Y. Narayanan, V. Chang, S. “Optical Patternation of a Water Spray Using Statistical Extinction Tomography,” Atomization and Sprays 13 27 43 2003