Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Advanced Material Characterizations and Constitutive Modeling for AHSS Springback Predictions

Journal Article
2010-01-0980
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2010-01-0980
Published April 12, 2010 by SAE International in United States
Advanced Material Characterizations and Constitutive Modeling for AHSS Springback Predictions
Sector:
Citation: Zhu, H., Sriram, S., Yan, B., and Duroux, P., "Advanced Material Characterizations and Constitutive Modeling for AHSS Springback Predictions," SAE Int. J. Mater. Manuf. 3(1):691-701, 2010, https://doi.org/10.4271/2010-01-0980.
Language: English

References

  1. An, Y. G. Vegter H. 1998 The difference between bulging test and through-thickness compression test for sheet steels and Al alloys IDDRG Working Groups
  2. An, Y. G. Vegter H. 1999 Experimental study of the friction behavior in the compression test IDDRG Working Groups 1999
  3. Bao, Y. 2003 Prediction of ductile crack formation in uncracked bodies Dept. of Ocean Engineering, MIT
  4. Bate, P.S. Wilson D.V. 1986 Analysis of the Bauschinger effect Acta Metall. 34 1097 1105
  5. Chaboche, JL Rousselier, G. 1983 On the plastic and viscoplastic constitutive equations. Part I and part II. Transactions of ASME Journal of Pressure Vessel Technology 105 153 164
  6. Clevelands, R.M. Ghosh, A.K. 2002 Inelastic effects on springback in metals International Journal of Plasticity 18 769 785
  7. Ghaboussi, J. 2006 Private communication Univ. of Illinois Urbana-Champaign
  8. Haddadi, H. Bouvier, S. Banu, M. Maier, C. Teodosiu, C. 2006 Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modeling, numerical analysis and identification International Journal of Plasticity 22 2226 2271
  9. Hill, R. 1994 Classical plasticity: a retrospective view and a new proposal Journal of the Mechanics and Physics of Solids 42 11 1803 1816
  10. Hu, Z. Rauch, E.F. Teodosiu, C. 1992 Work-hardening behavior of mild steel under stress reversal at finite strains International Journal of Plasticity 8 839 856
  11. Hu, Z. 1994 Work-hardening behavior of mild steel under cyclic deformation at finite strains Acta Metall. Mater. 42 3481 3491
  12. Huang, G. Zhu, H. Yan, B. “A Novel Approach for Generating a Full-Range Tensile Stress-Strain Curve,” SAE Technical Paper 2009-01-0470 2009
  13. Kessler, L. Gerlach, J. 2006 The Impact of Material Testing Strategies on the Determination and Calibration of Different FEM Material Models IDDRG Working Groups
  14. Lalam, S.H. Zhu, H. 2006 Investigation of neural network techniques for steel constitutive modeling ArcelorMittal Global R & D. Internal Research
  15. Levy, B.S. Van Tyne, C.J. Moon, Y.H. Mikalsen, C. “The Effective Unloading Modulus for Automotive Sheet Steel,” SAE Technical Paper 2006-01-0146 2006
  16. Morestin, F. Boivin, M. 1996 On the necessity of taking into account the variation in the Young modulus with plastic strain in elastic-plastic software Nuclear Engineering and Design 162 107 116
  17. NUMISHEET 2005 Detroit, MI August 15-19 2005
  18. Ortiz, M. 2008 Nonconvex plasticity and microstructure 22nd International Congress of Theoretical and Applied Mechanics Adelaide, Australia
  19. Perez, R. Benito, J.A. Prado, J. M. 2005 Study of the inelastic response of TRIP steels after plastic deformation ISIJ International 45 12 1925 1933
  20. Sadagopan S. Urban D. “Formability Characterization of a New Generation of High Strength Steels” AISI/DOE Report No. TRP 0012 March 2003
  21. Shi, M. Zhu X. Xia C. Stoughton T.B. 2008 Determination of nonlinear isotropic / kinematic hardening constitutive parameters for AHSS using tension and compression tests NUMISHEET 2008 Interlaken, Switzerland
  22. Stoughton, T.B. Xia, C. Du, C. Shi, M. 2006 Challenges for constitutive models for forming of advanced steels Advanced High Strength Steel Workshop Arlington, Virginia, USA
  23. Tozawa, Y. 1978 “Plastic Deformation Behavior under Conditions of Combined Stress” Mechanics of Sheet Metal Forming Koistinen D.P. Wang N-.M. New York Plenum Press 81 110
  24. Yoshida, F. Uemori, T. 2002 A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation International Journal of Mechanical Plasticity 18 661 686
  25. Yoshida, F. Uemori, T. 2003 A model of large-strain cyclic plasticity and its application to springback simulation International Journal of Mechanical Sciences 45 1687 1702
  26. Wagoner, R.H. Chenot, J. 1996 Fundamentals of Metal Forming John Wiley and Sons
  27. Zhao, K.M. Lee, J.K. 2001 Generation of cyclic stress-strain curves for sheet metals ASME Journal of Engineering Materials and Technology 123 391 397
  28. Zhu, H. Huang, L. Wong, C. “Unloading Modulus on Springback in Steels,” SAE Technical Paper 2004-01-1050 , SAE Transactions Journal of Materials and Manufacturing 480 484 2004

Cited By

Recommended Content

Journal Article Experiences with Experimental Determination of the Yield Locus and its Evolution for Advanced High Strength Steels
Journal Article Extending Tensile Curves beyond Uniform Elongation Using Digital Image Correlation: Capability Analysis
Technical Paper Characterization of the Fracture Toughness of TRIP 800 Sheet Steels Using Microstructure-Based Finite Element Analysis