This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Validation of Digital Image Correlation for Sheet Metal Strain Measurement
Technical Paper
2010-01-0955
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The automobile industry has an increasing demand for lightweight components, improve product performance, efficiency and increase safety. For optimization of design and manufacturing of these components the detail measurement of critical material properties such as strain limit, strength coefficients, anisotropy coefficients et al, are required. The most commonly used method for finding the material properties is tensile test with extensometer. But this system only provides an average strain over the specimen gauge length and is not applicable to post diffuse necking.
Digital Image Correlation (DIC) technique is the latest state of art technique. Because of its capability of fast data acquisition, this technique is suited well for characterization of material properties both in the elastic and plastic ranges. It also has advantages of full field, non-contact, and considerately high precision for displacement and strain measurements. The previous investigations clearly demonstrate that DIC has a great potential for providing whole field true strain measurement well into the diffuse necking region. But most of the investigations do not give any proof regarding the reliability and accuracy of DIC technique.
This paper will investigate the whole field true strain measurement and validation of the DIC technique using the stress strain curve of the specimen. The method use to prove this is called as “Gauge Effect”. This technique provides a practical approach for the validation of DIC.
Recommended Content
Authors
Citation
Gothekar, A., "Validation of Digital Image Correlation for Sheet Metal Strain Measurement," SAE Technical Paper 2010-01-0955, 2010, https://doi.org/10.4271/2010-01-0955.Also In
Optimization, Optical Measurement Nondestructive Testing Techniques, 2010
Number: SP-2295; Published: 2010-04-13
Number: SP-2295; Published: 2010-04-13
References
- Wang Y. H. Jiang J. H. Wanintrudal C. Du C. Zhou D. Smith L. M. Yang L. X. “Whole Field Sheet-Metal Tensile Test Using Digital Image Correlation” Experimental Techniques September/October 2009
- Considine, J.M. Scott, C.T. Gleisner, R. Zhu, J.Y. “Use of digital image correlation to study the local deformation field of paper and paperboard” 13th fundamental research symposium conference 2005
- Chevalier L Calloch S Hild F Marco Y “Digital image correlation used to analyze the multiaxial behavior of rubber-like materials” European Journal of Mechanics A/Solids 2001
- Wattrisse B Chrysochoos A Muracciole JM “Analysis of strain localization during tensile tests by digital image correlation” Experimental Mechanics 41 1 March 2001 29 39
- Lagattu F Brillaud J Lafarie-Frenot MC “High strain gradient measurements by using digital image correlation technique” [J] Material Characterization 53 17 28
- Tong W. “An Evaluation of Digital Image Correlation Criteria for strain mapping application” [J] Strain 41 167 175 2005
- Tarigopula V. (SIMLab) Hopperstad O.S. (SIMLab) Langseth M. (SIMLab) Clausen A.H. (SIMLab) Hild François (LMT) “A study of localisation in dual-phase high-strength steels under dynamic loading using digital image correlation and FE analysis” [J]: International Journal of Solids and Structures 45 2008 601 619 Cornell University library, arXiv.org
- Lockwood W. D. Reynolds A. P. “Use and Verification of Digital Image Correlation for Automated 3-D Surface Characterization in the Scanning Electron Microscope,” [J] Materials Characterization 42 123 134 1999
- Chang S Wang C S Xiong C Y Fang J “Nanoscale in-plane displacement evaluation by AFM scanning and digital image correlation processing,” [J] Nanotechnology 16 344 349 2005
- Bornert M. Bremand F. Doumalin P. Dupre J. Fazzini M. Grodiac M. Hild F. Mistou, F. Molimard J. Orteu J. Robert L. Surrie Y. Vacher P. Wattrisse B. 2009 Assessment of Digital Image Correlation Measurement Errors: Methodology and Results Experimental Mechanics
- Chu T.C. Ranson W.F. Sutton MA “Applications of digital-image-correlation techniques to experimental mechanics” Experimental Mechanics September 1985 232 235
- Lyons J.S. Liu J. Sutton M.A. “High-temperature deformation measurements using digital-image correlation” Experimental mechanics 1996 64
- Hung P.-C. Voloshin A. S. “In-plane Strain Measurement by Digital Image Correlation,” Journal of the Brazilian Society of Mechanical Sciences and Engineering XXV 3 215 221 2003
- Sutton, M.A. Wolters, W.J. Peters, W.H. Ranson, W.F. McNeill, S.R. “Determination of Displacement Using an Improved Digital Correlation Method,” Computer Vision 1 3 133 139 1983
- Beer, F.P. Johnston, E.R. Jr Dewolf, J.T. Mazurek, D.F. Mechanics of Materials McGraw-Hill Companies 2006
- Zhang Dongsheng Eggleton Charles D. Arola Dwayne D. “Evaluating the Mechanical Behavior of Arterial Tissue using Digital Image Correlation,” [J] Experimental Mechanics 42 4 409 416 2002