This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Extending the High Load Operating Limit of a Naturally-Aspirated Gasoline HCCI Combustion Engine

Journal Article
2010-01-0847
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 12, 2010 by SAE International in United States
Extending the High Load Operating Limit of a Naturally-Aspirated Gasoline HCCI Combustion Engine
Sector:
Citation: Yun, H., Wermuth, N., and Najt, P., "Extending the High Load Operating Limit of a Naturally-Aspirated Gasoline HCCI Combustion Engine," SAE Int. J. Engines 3(1):681-699, 2010, https://doi.org/10.4271/2010-01-0847.
Language: English

References

  1. Hiraya, K. Hasegawa, K. Urushihara, T. Iiyama, A. Itoh, T. “A Study on Gasoline Fueled Compression Ignition Engine - A Trial of Operation Region Expansion,” SAE Technical Paper 2002-01-0416 2002
  2. Urata, Y. Awasaka, M. Takanashi, J. Kakimura, T. Hakozaki, T. Umemoto, A. “A Study of Gasoline-fueled HCCI Engine Equipped with an Electromagnetic Valve Train,” SAE Technical Paper 2004-01-1898 2004
  3. Cairns, A. Blaxill, H. “The Effects of Combined Internal and External Exhaust Gas Recirculation on Gasoline Controlled Auto-Ignition,” SAE Technical Paper 2005-01-0133 2005
  4. Onishi, S. Hong Jo, S. Shoda, K. Do Jo, P. Kato, S. “Active Thermo-Atmosphere Combustion (ATAC) - A New Combustion Process for Internal Combustion Engines,” SAE Technical Paper 790501 1979
  5. Iwabuchi, Y. Kawai, K. Shoji, T. Takeda, Y. “Trial of New Concept Diesel Combustion System - Premixed Compression-Ignited Combustion,” SAE Technical Paper 1999-01-0185 1999
  6. Kanda, T. Hakozaki, T. Uchimoto, T. Hatano, J. Kitayama, N. Sono, H. “PCCI Operation with Fuel Injection Timing Set Close to TDC,” SAE Technical Paper 2006-01-0920 2006
  7. Kimura, S. Aoki, O. Kitahara, Y. Aiyoshizawa, E. “Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards,” SAE Technical Paper 2001-01-0200 2001
  8. Yun Hanho Reitz Rolf D. “Combustion Optimization in the Low-Temperature Diesel Combustion Regime,” Int. Journal of Engine Research 2005
  9. Najt, P. Foster, D. “Compression-Ignited Homogeneous Charge Combustion,” SAE Technical Paper 830264 1983
  10. Thring, R. H. “Homogeneous-Charge Compression Ignition (HCCI) Engines,” SAE Technical Paper 892068 1989
  11. Koopmans, L. Ogink, R. Denbratt, I. “Direct Gasoline Injection in the Negative Valve Overlap of a Homogeneous Charge Compression Ignition Engine,” SAE Technical Paper 2003-01-1854 2003
  12. Shen, Y. King, E. Pfahl, U. Krile, R. T. Slone, E. Orban, J. Wright, K. “Fuel Chemistry Impacts on Gasoline HCCI Combustion with Negative Valve Overlap and Direct Injection,” SAE Technical Paper 2007-01-4105 2007
  13. Urushihara, T. Hiraya, K. Kakuhou, A. Itoh, T. “Expansion of HCCI Operating Region by the Combination of Direct Fuel Injection, Negative Valve Overlap and Internal Fuel Reformation,” SAE Technical Paper 2003-01-0749 2003
  14. Fuerhapter, A. Piock, W. F. Fraidl, G. K. “CSI - Controlled Auto Ignition - the Best Solution for the Fuel Consumption - Versus Emission Trade-Off?,” SAE Technical Paper 2003-01-0754 2003
  15. Babajimopoulos, A. Lavoie, G. Assanis, D. “Modeling HCCI Combustion with High Levels of Residual Gas Fraction - A Comparison of a Two VVA Strategies,” SAE Technical Paper 2003-01-3220 2003
  16. Wolters, P. Salber, W. Geiger, J. Duesmann, M. Dilthey, J. “Controlled Auto Ignition Combustion Process with an Electromechanical Valve Train,” SAE Technical Paper 2003-01-0032 2003
  17. Yun, H. Wermuth, N. Najt, P. “Development of Robust Gasoline HCCI Idle Operation Using Multiple Injection and Multiple Ignition Strategy,” SAE Technical Paper 2009-01-0499 2009
  18. Wermuth, N. Yun, H. Najt, P. “Enhancing Light Load HCCI Combustion in a Direct Injection Gasoline Engine by Fuel Reforming During Recompression,” SAE Int. J. of Engines 2 1 823 836 2009
  19. Hyvonen, J. Haraldsson, G. Johansson, B. “Supercharging HCCI to Extend the Operating Range in a Multi-Cylinder VCR-HCCI Engine,” SAE Technical Paper 2003-01-3214 2003
  20. Olsson, J-O. Tunestal, P. Johansson, B. “Boosting for High Load HCCI,” SAE Technical Paper 2004-01-0940 2004
  21. Cairns, A. Blaxill, H. “Lean Boost and External Exhaust Gas Recirculation for High Load Controlled Auto-Ignition,” SAE Technical Paper 2005-01-3744 2005
  22. Hatamura, K. “A Study on HCCI (Homogeneous Charge Compression Ignition) Gasoline Engine Supercharged by Exhaust Blow Down Pressure,” SAE Technical Paper 2007-01-1873 2007
  23. Haraldsson, G. Tunestal, P. Johansson, B. Hyvonen, J. “HCCI Combustion Phasing with Closed-Loop Combustion Control Using Variable Compression Ratio in a Multi Cylinder Engine,” SAE Technical Paper 2003-01-1830 2003
  24. Urushihara, T. Yamaguchi, K. Yoshizawa, K. Itoh, T. “A Study of a Gasoline-fueled Compression Ignition Engine - Expansion of HCCI Operation Range Using SI Combustion as a Trigger of Compression Ignition,” SAE Technical Paper 2005-01-0180 2005
  25. Aroonsrisopon, T. Werner, P. Waldman, J. Sohm, V. Foster, D. Ibara, T. Morikawa, T. Lida, M. “Expanding the HCCI Operation With the Charge Stratification,” SAE Technical Paper 2004-01-1756 2004
  26. Milovanovic, N. Blundell, D. Pearson, R. Turner, J. Chen, R. “Enlarging the Operational Range of a Gasoline HCCI By Controlling the Coolant Temperature,” SAE Technical Paper 2005-01-0157 2005
  27. Woschni, G. “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine,” SAE Technical Paper 670931 1967
  28. Yun, H. J. Mirsky, W. SAE Technical Paper 741015 1974
  29. Matsuda, T. Wada, H. Kono, T. Nakamura, T. Urushihara, T. “A Study of a Gasoline-fueled HCCI Engine - Mode Changes from SI Combustion to HCCI Combustion,” SAE Technical Paper 2008-01-0050 2008
  30. Cairns, A. Blaxill, H. “The Effects of Two-Stage Cam Profile Switching and External EGR on SI-CAI Combustion Transition,” SAE Technical Paper 2007-01-0187 2007
  31. Eng, J. A. “Characterization of Pressure Waves in HCCI Combustion,” SAE Technical Paper 2002-01-2859 2002

Cited By