Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Expanding the Experimental Capabilities of the Ignition Quality Tester for Autoigniting Fuels

Journal Article
2010-01-0741
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/2010-01-0741
Published April 12, 2010 by SAE International in United States
Expanding the Experimental Capabilities of the Ignition Quality Tester for Autoigniting Fuels
Sector:
Citation: Bogin, G., Dean, A., Ratcliff, M., Luecke, J. et al., "Expanding the Experimental Capabilities of the Ignition Quality Tester for Autoigniting Fuels," SAE Int. J. Fuels Lubr. 3(1):353-367, 2010, https://doi.org/10.4271/2010-01-0741.
Language: English

References

  1. Wooldridge, M. S. Walton, S. M. He, X. Zigler, B. T. “Chemical Kinetics of Homogeneous Charge Compression Ignition and Other Low-Temperature Combustion Strategies,” Proceedings of the 2006 Technical Meeting of the Central States Section of The Combustion Institute 2006
  2. Epping, K. Aceves, S. Bechtold, R. Dec, J. “The Potential of HCCI Combustion for High Efficiency and Low Emissions,” SAE Technical Paper 2002-01-1923 2002
  3. “Letter Report on the Review of the Research Program of the FreedomCAR and Fuel Partnership, Phase 3,” Committee on the Review of the Research Program of the FreedomCAR and Fuel Partnership, Phase 3, National Research Council 2009
  4. “Review of the 21 st Century Truck Partnership,” Committee to Review the 21 st Century Truck Partnership; National Research Council 2008
  5. Battin-Leclerc, F. “Detailed Chemical Kinetic Models for Low-Temperature Combustion of Hydrocarbons with Application to Gasoline and Diesel Fuel Surrogates,” Progress in Energy and Combustion Science 34 440 498 2008
  6. Donovan, M. T. He, X. Zigler, B. T. Palmer, T. R Wooldridge, M. S. Atreya, A. “Demonstration of a Free-Piston Rapid Compression Facility for the Study of High Temperature Combustion Phenomena,” Combustion and Flame 137 351 365 2004
  7. Würmel, J. Simmie, J. M Curran, H. J. “Studying the Chemistry of HCCI in Rapid Compression Machines,” Int. J. Vehicle Design 44 1/2 2007
  8. Walton, S. M. Perez, C. Wooldridge, M. S. “An Experimental Investigation of the Auto-Ignition Properties of Two C 5 Esters: Methyl Butanoate and Butyl Methanoate,” IMECE2007-41944, Proceedings of 2007 ASME International Mechanical Engineering Congress and Exposition 2007
  9. Walton, S. M. Wooldridge, M. S. Westbrook, C. K. “An Experimental Investigation of Structural Effects on the Auto-Ignition Properties of Two C 5 Esters,” Proceedings of the Combustion Institute 32 255 262 2009
  10. Ryan, T.W., III Stapper, B. “Diesel Fuel Ignition Quality as Determined in a Constant Volume Combustion Bomb,” SAE Technical Paper 870586 1987
  11. Allard, L.N. Webster, G.D. Hole, N.J. Ryan, T.W., III et al. “Diesel Fuel Ignition Quality as Determined in the Ignition Quality Tester (IQT),” SAE Technical Paper 961182 1996
  12. Allard, L.N. Hole, N.J. Webster, G.D. Ryan, T.W., III et al. “Diesel Fuel Ignition Quality as Determined in the Ignition Quality Tester (IQT) - Part II,” SAE Technical Paper 971636 1997
  13. Allard, L.N. Webster, G.D. Ryan, T.W., III Baker, G et al. “Analysis of the Ignition Behaviour of the ASTM D-613 Primary Reference Fuels and Full Boiling Range Diesel Fuels in the Ignition Quality Tester (IQT™) - Part III,” SAE Technical Paper 1999-01-3591 1999
  14. Allard, L.N. Webster, G.D. Ryan, T.W., III Matheaus, A.C. et al. “Diesel Fuel Ignition Quality as Determined in the Ignition Quality Tester (IQT™) - Part IV,” SAE Technical Paper 2001-01-3527 2001
  15. Metcalf, O.J. Swarts, A. Yates, A. “A Study of the Ignition-Delay Character of n-Heptane in the IQT™ Combustion Bomb Using CFD Modelling,” SAE Technical Paper 2007-01-0021 2007
  16. Yates, A.D.B. Viljoen, C.L. Swarts, A. “Understanding the Relation Between Cetane Number and Combustion Bomb Ignition Delay Measurements,” SAE Technical Paper 2004-01-2017 2004
  17. “Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber,” ASTM International July 2008
  18. “Standard Test Method for Cetane Number of Diesel Fuel Oil,” ASTM International August 2003
  19. “Interlaboratory Study to Establish Precision Statements for ASTM D6890, Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber,” Research Report D02-1602, Committee D02 on Petroleum Products and Lubricants, Subcommittee D02.01 on Combustion Characteristics ASTM International 19 September 2006
  20. “Interlaboratory Study to Establish Precision Statements for ASTM D613, Standard Test Method for Cetane Number of Diesel Fuel Oil,” Research Report D02-1532, Committee D02 on Petroleum Products and Lubricants, Subcommittee D02.01 on Combustion Characteristics ASTM International 4 December 2002
  21. “Development of the IQT™ Model to Calculate the Derived Cetane Number (DCN),” Research Report D02-1531, Committee D02 on Petroleum Products and Lubricants, Subcommittee D02.01 on Combustion Characteristics ASTM International 11 December 2002
  22. Bogin, G. E. De Filippo, A. Chen, J. Y. Chin, G. Luecke, J. Ratcliff, M. A. Zigler, B. T. Dean, A. M. “Modeling the Fuel Spray and Combustion Process of the Ignition Quality Tester™ with KIVA-3V,” 2009 Fall Meeting of the Western States Section of the Combustion Institute October 2009
  23. “AET Procedures Manual: Ignition Quality Tester (IQT™) for Diesel Fuel Cetane Number Evaluation,” Advanced Engine Technology Ltd. 2002
  24. Taylor, J. McCormick, R. Clark, W. “Develop In-House Laboratory Capability for Fuel Screening Relevant to CIDI and Advanced Combustion Concepts,” Report NREL/MP-540-34904 National Renewable Energy Laboratory Golden, Colorado September 2003
  25. Taylor, J. McCormick, R. Clark, W. “Report on the Relationship between Molecular Structure and Compression Ignition Fuels: Both Conventional and HCCI,” Report NREL/MP-540-36726 National Renewable Energy Laboratory Golden, Colorado August 2004 http://www.nrel.gov/vehiclesandfuels/pdfs/mp36726.pdf
  26. Taylor, J. “Fuels Performance Technologies: Milestone FY06 9.1-Using IQT Measurements, Develop Simplified Kinetic Expressions for Ignition of Fuels That Could Be Used in HCCI Engine Models,” Milestone Report NREL/MP-540-40755 National Renewable Energy Laboratory Golden, Colorado November 2006 http://www.nrel.gov/vehiclesandfuels/apbf/pdfs/40755.pdf
  27. He, X. Zigler, B. T. Walton, S. M. Wooldridge, M. S. Atreya, A. “An Experimental and Modeling Study of Iso-octane Ignition Delay Times under Homogeneous Charge Compression Ignition Conditions,” Combustion and Flame 142 266 275 2005
  28. Gallant, T. Franz, J.A. Alnajjar, M.S. Storey, J.M.E. et al. “Fuels for Advanced Combustion Engines Research Diesel Fuels: Analysis of Physical and Chemical Properties,” SAE Int. J. Fuels Lubr. 2 2 262 272 2009
  29. Gallant, T. Franz, J. A. Alnajjar, M. S. Storey, J. M. E. Lewis, S. A. Sluder, C. S. Cannella, W. J. Fairbridge, C. Hager, D. Dettman, H. Luecke, J. Ratcliff, M. A. Zigler, B. T. “Chemical and Physical Properties of the Fuels for Advanced Combustion Engines Research Diesel Fuels,” Coordinating Research Council report 2009
  30. Zeldovich, Ya. Sadovnik, I. Frank-Kamenecklu, D. Nitrogen Oxidation at Burning Leningrad USSR AC 1947
  31. Bowman, C.T. “Control of Combustion-generated nitrogen oxide emissions: Technology driven by regulation,” Proc. Comb. Inst. 24 859 1993
  32. Fenimore, C.P. “Formation of nitric oxide in premixed hydrocarbon flames,” Thirteenth Symposium on Combustion 373 380 Pittsburg, PA The Combustion Institute 1970
  33. Bozzelli, J. W. Dean, A. M “O +NNH: A Possible New Route for NO x Formation in Flames,” Int. J. Chem. Kinet. 1995 27 1097
  34. Correa, S.M. “A review of NO x Formation Under Gas-Turbine Combustion condition,” Combustion Science and Technology 87 329 1993
  35. Zeldovich, Y.B. “The oxidation of nitrogen in combustion and explosions,” Acta Physiochim. 21 1946
  36. Lavoie, G.A. Heywood, J.B. Keck, J.C. “Experimental and Theoretical Investigation of Nitric Oxide Formation in Internal Combustion Engines,” Combustion Science and Technology 1 313 326 1970
  37. Pierpont, D.A. Reitz, R.D. “Effects of Injection Pressure and Nozzle Geometry on D.I. Diesel Emissions and Performance,” SAE Technical Paper 950604 1995
  38. Stone, R. “Introduction to Internal Combustion Engines, Third Edition,” SAE International Warrendale, PA 978-0-7680-0495-3 1999

Cited By

Recommended Content

Journal Article Effect of Injection Pressure on Ignition, Flame Development and Soot Formation Processes of Biodiesel Fuel Spray
Technical Paper Spray Characteristics of Biodiesel and Diesel Fuels under High Injection Pressure with a Common Rail System
Technical Paper Combustion of Biodiesel- and Ethanol-Diesel Intake Injection Mixtures with