This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Validation of Mesh- and Timestep- Independent Spray Models for Multi-Dimensional Engine CFD Simulation
Journal Article
2010-01-0626
ISSN: 1946-3952, e-ISSN: 1946-3960
Sector:
Topic:
Citation:
Wang, Y., Ge, H., and Reitz, R., "Validation of Mesh- and Timestep- Independent Spray Models for Multi-Dimensional Engine CFD Simulation," SAE Int. J. Fuels Lubr. 3(1):277-302, 2010, https://doi.org/10.4271/2010-01-0626.
Language:
English
References
- Gosman, A. D. Clerides, D. “Diesel Spray Modeling: A Review,” 13th Annual Conference on Liquid Atomization and Spray Systems Florence, Italy 12 21 1997
- Abraham, J. “What Is Adequate Resolution in the Numerical Computations of Transient Jet,” SAE Technical Paper 970051 1997
- Ge, H. W. Shi, Y. Reitz, R. D. Willems, W. “Optimization of a HSDI Diesel Engine at Low-Load Operation Using a Multi-Objective Genetic Algorithm and Detailed Chemistry,” Proceedings of the Institution of Mechanical Engineers, Part D, Journal of Automobile Engineering 2009
- Amsden, A. A. O'Rourke, P. J. Butler, T. D. “KIVA-II: A Computer Program for Chemically Reactive Flows with Sprays” Technical Report LA-11560-MS Los Alamos National Laboratory 1989
- Dukowicz, J. K. “A Particle-Fluid Numerical Model for Liquid Sprays,” Journal of Computational Physics 35 229 253 1980 10.1016/0021-9991(80)90087-X
- Mckinley, T. L. Primus, R. J. “Three Dimensional Calculations of Air Motion, Sprays, and Combustion in A Quiescent Direct-Injection Diesel Engine,” 1990
- Béard, P. Duclos, J-M Habchi, C. Bruneaux, G. Mokaddem, K. Baritaud, T. “Extension of Lagrangian-Eulerian Spray Modeling: Application to High Pressure Evaporating Diesel Sprays,” SAE Technical Paper 2000-01-1893 2000
- Lippert, A. M. Chang, S. Are S. Schmidt, D. P. “Mesh Independence and Adaptive Mesh Refinement for Advanced Engine Spray Simulations,” SAE Technical Paper 2005-01-0207 2005
- Xue, Q. Kong, S. C. “Development of Adaptive Mesh Refinement Scheme for Engine Spray Simulations” Computers & Fluids 38 939 949 2009 10.1016/j.compfluid.2008.10.004
- Abraham, J. Magi, V. “A Virtual Liquid Source (VLS) Model for Vaporizing Diesel Sprays,” SAE Technical Paper 1999-01-0911 1999
- Versaevel, P. Motte, P. Wieser, K. “A New 3D Model for Vaporizing Diesel Sprays Based on Mixing-Limited Vaporization,” SAE Technical Paper 2000-01-0949 2000
- Wan, Y. P. Peters, N. “Application of the Cross-Sectional Average Method to Calculations of the Dense Spray Region in a Diesel Engine,” SAE Technical Paper 972866 1997
- Abani, N. Kokjohn, S. Park, S. W. Bergin, M. Munnannur, A. Ning, W. Sun, Y. Reitz, R. D. “An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations,” SAE Technical Paper 2008-01-0970 2008
- Abani, N. Reitz, R. D. “Unsteady Turbulent Round Jets and Vortex Motion,” Physics of Fluids 19 1 125102 2007 10.1063/1.2821910
- Munnannur, A. “Droplet Collision Modeling in Multi-Dimensional Engine Spray Computations,” Mechanical Engineering Department, University of Wisconsin-Madison 2007
- Beale, J. C. Reitz, R. D. “Modeling Spray Atomization with the Kelvin-Helmholtz / Rayleigh-Taylor Hybrid Model,” Atomization and Sprays 9 623 650 1999
- Munnannur, A. Reitz, R.D. “A Comprehensive Collision Model for Multi-Dimensional Engine Spray Computations,” Atomization and Sprays 19 7 597 619 2009 10.1615/AtomizSpr.v19.i7
- Abani, N. Reitz, R. D. “Effects of Sub-Grid Scale Mixing of Vapor in Diesel Sprays Using Jet Theory,” Atomization and Sprays
- Crowe C. Sommerfeld M. Tsuji Y. Multiphase Flows with Droplets and Particles CRC Press Roca Raton 10: 0849394694 1998
- Abraham J. “Entrainment Characteristics of Transient Jets” Numerical Heat Transfer, Part A 30 347 364 1996 10.1080/10407789608913844
- Su, T. F. Patterson, M. A. Reitz, R. D. Farrell P. V. “Experimental and Numerical Studies of High Pressure Multiple Injection Sprays,” SAE Technical Paper 960861 1996
- Levich, V. G. Physicochemical Hydrodynamics Prentice-Hall New Jersey 10: 0136744400 1962
- Reitz, R. D. “Modeling Atomization Processes in High-Pressure Vaporizing Sprays” Atomization and Sprays 3 309 337 1987
- Reitz, R. D. Diwakar, R. “Effect of Drop Breakup on Fuel Sprays” SAE Technical Paper 860469 1986
- Bellman R. Pennington R. H. “Effects of Surface Tension and Viscosity on Taylor Instability” Quarterly of Applied Mathematics 12 2 151 162 1954
- Schmidt, D. P. Rutland, C. J. “A New Droplet Collision Algorithm,” Journal of Computational Physics 164 62 80 2000 10.1006/jcph.2000.6568
- Rieffel M. A. “A Method for Estimating the Computational Requirements of DSMC Simulations” Journal of Computational Physics 149 95 113 1999 10.1006/jcph.1998.6140
- Mitroglou, N. Nouri, J. M. Gavaises, M. Arcoumanis, C. “Spray Characteristics of a Multi-Hole Injector for Direct-Injection Gasoline Engines” International Journal of Engine Research 7 255 270 2006
- Mitroglou, N. Gavaises, M. City University London Aug. 2009
- Naber, J. D. Siebers, D. L. “Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays SAE Technical Paper 960034 1996
- Sandia National Laboratory “Engine Combustion Network” https://share.sandia.gov/ecn/ May 2007
- Musculus, M. P. B. “On the Correlation between NOx Emissions and the Diesel Premixed Burn” SAE Transactions, Journal of Fuels and Lubricants 113 631 651 2004
- Singh, S. Reitz, R. D. Musculus, M. P. B. Lachaux, T. “Validation of Engine Combustion Models against Detailed In-Cylinder Diagnostics Data for a Heavy-Duty DI Diesel Engine” International Journal of Engine Research 8 97 126 2007 10.1243/14680874JER02406
Cited By
Recommended Content
Technical Paper | Intake Flow Predictions of a Transparent DI Diesel Engine |
Technical Paper | Modeling the Effects of Auxiliary Gas Injection on Diesel Engine Combustion and Emissions |