Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Mixing-Controlled, Low Temperature Diesel Combustion with Pressure Modulated Multiple-Injection for HSDI Diesel Engine

Journal Article
2010-01-0609
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2010-01-0609
Published April 12, 2010 by SAE International in United States
Mixing-Controlled, Low Temperature Diesel Combustion with Pressure Modulated Multiple-Injection for HSDI Diesel Engine
Sector:
Citation: Kitamura, T. and Ito, T., "Mixing-Controlled, Low Temperature Diesel Combustion with Pressure Modulated Multiple-Injection for HSDI Diesel Engine," SAE Int. J. Engines 3(1):461-478, 2010, https://doi.org/10.4271/2010-01-0609.
Language: English

References

  1. Kimura, S. Aoki, O. Kitahara, Y., Aiyoshizawa, E. “Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards,” SAE Technical Paper 2001-01-0200 2001
  2. Walter, B. Gatellier, B. “Development of the High Power NADI Concept Using Dual Mode Diesel Combustion to Achieve Zero NOx and Particulate Emissions,” SAE Technical Paper 2002-01-1744 2002
  3. Okude, K. Mori, K. Shiino, S., Moriya, T. “Premixed Compression Ignition (PCI) Combustion for Simultaneous Reduction of NOx and Soot in Diesel Engine,” SAE Technical Paper 2004-01-1907 2004
  4. Minato, A. Tanaka, T. Nishimura, T. “Investigation of Premixed Lean Diesel Combustion with Ultra High Pressure Injection,” SAE Technical Paper 2005-01-0914 2005
  5. Kanda, T. Hakozaki, T. Uchimoto, T. Hatano, J. et al. “PCCI Operation with Fuel Injection Timing Set Close to TDC,” SAE Technical Paper 2006-01-0920 2006
  6. Murata, Y. Kusaka, J. Daisho, Y. Kawano, D. et al. “Miller-PCCI Combustion in an HSDI Diesel Engine with VVT,” SAE Int. J. Engines 1 1 444 456 2008
  7. Kamimoto, T. Bae, M.H. “High Combustion Temperature for the Reduction of Particulate in Diesel Engines,” SAE Technical Paper 880423 1988
  8. Akihama, K. Takatori, Y. Inagaki, K. Sasaki S. et al. “Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature,” SAE Technical Paper 2001-01-0655 2001
  9. Kitamura, T. Ito, T. Senda, J. Fujimoto, H. “Mechanism of Smokeless Diesel Combustion with Oxygenated Fuels Based on the Dependence of the Equivalence Ratio and Temperature on Soot Particle Formation,” Int. J. Engine Research 3 4 223 248 2002
  10. Hashizume, T. Miyamoto, T. Akagawa, H. Tsujimura, K. “Combustion and Emission Characteristics of Multiple Stage Diesel Combustion,” SAE Technical Paper 980505 1998
  11. Sun, Y. Reitz, R. D. “Modeling Diesel Engine NOx and Soot Reduction with Optimized Two-Stage Combustion,” SAE Technical Paper 2006-01-0027 2006
  12. Sun, Y. Reitz, R. D. “Adaptive Injection Strategies (AIS) for Ultra-Low Emissions Diesel Engines,” SAE Technical Paper 2008-01-0058 2008
  13. Kokjohn, S.L. Swor, T.A. Andrie, M.J. Reitz, R.D. “Experiments and Modeling of Adaptive Injection Strategies (AIS) in Low Emissions Diesel Engines,” SAE Int. J. Engines 2 1 16 32 2009
  14. Pickett, L.M. Siebers, D.L. “Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion,” SAE Technical Paper 2004-01-1399 2004
  15. Pickett, L.M. “Low Flame Temperature Limits for Mixing-Controlled Diesel Combustion,” Proc. Combust. Inst. 30 2727 2735 2005
  16. Upatnieks, A. Mueller, C.J. “Clean, Controlled DI Diesel Combustion Using Dilute, Cool Charge Gas and a Short-Ignition-Delay, Oxygenated Fuel,” SAE Technical Paper 2005-01-0363 2005
  17. Dec, J.E. “A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging,” SAE Technical Paper 970873 1997
  18. Nakagawa, H. Endo, H. Deguchi, Y. Noda, M. et al. “NO Measurement in Diesel Spray Flame Using Laser Induced Fluorescence,” SAE Technical Paper 970874 1997
  19. Dec, J.E. Canaan, R.E. “PLIF Imaging of NO Formation in a DI Diesel Engine,” SAE Technical Paper 980147 1998
  20. Matsui, Y. Kamimoto, T. Matsuoka, S. “Formation and Oxidation Processes of Soot Particulates in a D. I. Diesel Engine - An Experimental Study Via the Two-Color Method,” SAE Technical Paper 820464 1982
  21. Flynn, P.F. Durrett, R.P. Hunter, G.L. zur Loye, A.O. et al. “Diesel Combustion: An Integrated View Combining Laser Diagnostics, Chemical Kinetics, and Empirical Validation,” SAE Technical Paper 1999-01-0509 1999
  22. Siebers, D.L. Higgins, B. “Flame Lift-Off on Direct-Injection Diesel Sprays Under Quiescent Conditions,” SAE Technical Paper 2001-01-0530 2001
  23. Musculus, M.P. Dec, J.E. Tree, D.R. “Effects of Fuel Parameters and Diffusion Flame Lift-off on Soot Formation in a Heavy-Duty DI Diesel Engine,” SAE Technical Paper 2002-01-0889 2002
  24. Shimo, D. Fujimoto, M. Fukuda, D. Kim, S. K. Sueoka, M. Kataoka, M. “Comprehensive Technological Development of Innovative, Next-Generation, Low-Pollution Vehicles: High Efficient and Clean Diesel Combustion Concept ITIC-PCI (in Japanese with English abstract),” JSAE Technical Paper 20075848 2007
  25. Ito, T. Hosaka, T. Ueda, M. Senda, J. et al. “Detailed Kinetic Modelling and Laser Diagnostics of Soot Formation Process in Diesel Jet Flame,” SAE Technical Paper 2004-01-1398 2004
  26. Haugen, D. “A Path to More Sustainable Transportation,” 10th Diesel Engine Emissions Reduction (DEER) Conference 2004
  27. Greaney, A. “Ricardo's ACTION Strategy: An Enabling Light Duty Diesel Technology for the US Market,” 11th Diesel Engine Emissions Reduction (DEER) Conference 2005
  28. Schindler, W. Haisch, C. Beck, H.A. Niessner, R. et al. “A Photoacoustic Sensor System for Time Resolved Quantification of Diesel Soot Emissions,” SAE Technical Paper 2004-01-0968 2004
  29. Chaves, H. Knapp, M. Kubitzek, A. Obermeier, F. et al. “Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles,” SAE Technical Paper 950290 1995
  30. Soteriou, C. Andrews, R.J. Smith, M. “Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization,” SAE Technical Paper 950080 1995
  31. Senecal, P.K. Richards, K.J. Pomraning, E. Yang, T. et al. “A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations,” SAE Technical Paper 2007-01-0159 2007
  32. Senecal, P.K. Pomraning, E. Richards, K.J. Briggs, T.E. et al. “Multi-Dimensional Modeling of Direct-Injection Diesel Spray Liquid Length and Flame Lift-Off Length Using CFD and Parallel Detailed Chemistry,” SAE Technical Paper 2003-01-1043 2003
  33. Patel, A. Kong, S.-C. Reitz, R.D. “Development and Validation of a Reduced Reaction Mechanism for HCCI Engine Simulations,” SAE Technical Paper 2004-01-0558 2004
  34. Kong, S. C. Sun, Y. Reitz, R. D. “Modeling Diesel Spray Flame Lift-Off, Sooting Tendency and NOx Emissions using Detailed Chemistry with Phenomenological Soot Model,” ASME ICES2005-1009 2005
  35. Han, Z. Ulodogan, A. Hampson, G.J. Reitz, R.D. “Mechanism of Soot and NOx Emission Reduction Using Multiple-Injection in a Diesel Engine,” SAE Technical Paper 960633 1996
  36. Tsurushima, T. Kunishima, E. Asaumi, Y. Aoyagi, Y. et al. “The Effect of Knock on Heat Loss in Homogeneous Charge Compression Ignition Engines,” SAE Technical Paper 2002-01-0108 2002

Cited By

Recommended Content

Technical Paper GDI Sprays with up to 200 MPa Fuel Pressure and Comparison of Diesel-like and Gasoline-Like Injector Designs
Technical Paper Experimental Study of the Combustion Process in a Heavy–Duty DI Diesel Engine for Different Injection Scenarios
Technical Paper Quantitative Analysis of Soot Formation and Oxidation Process using Laser-Induced Incandescence