This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effects of Natural Fiber Surface Treatments and Matrix Modification on Mechanical Properties of Their Composites
Technical Paper
2010-01-0426
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Natural fibers have shown promise as reinforcement in polymer matrix composites in automotive applications. Due to the presence of hydroxyl groups from cellulose and lignin, natural fibers exhibit highly hydrophilic properties. This makes fiber-matrix adhesion very difficult because most structural polymers are hydrophobic in nature. Therefore, in order to maximize natural fiber reinforced composite performance, fiber surface modification is required. In addition, a chemical additive to polymer matrix is another direction to improve the performance. In this study, several types of natural fibers were chosen, including European flax fiber, North American flax, and North American hemp fiber. Sodium hydroxide treatment followed by acrylic resin treatment was investigated for its influence on vinyl ester cure kinetics and interfacial properties.
Recommended Content
Authors
Citation
Huo, S., Fuqua, M., Chevali, V., and Ulven, C., "Effects of Natural Fiber Surface Treatments and Matrix Modification on Mechanical Properties of Their Composites," SAE Technical Paper 2010-01-0426, 2010, https://doi.org/10.4271/2010-01-0426.Also In
References
- Wang B. Panigrahi S. Tabil L. Crerar W. “Effects of chemical treatments on mechanical and physical properties of flax fiber-reinforced rotationally molded composites.” 2004 ASAE/CSAE Annual International Meeting 2004
- Mustata Adriana “Factors influencing fiber-fiber friction in the case of bleached flax.” Cellulose chemistry and technology 31 405 413 1997
- Faruk Omar “Cars from jute and other bio-fibers.” http://biggani.com/files_of_biggani/mashiur/interview/omar_faruk.pdf
- Nevell T.P. Zeronian S.H. Cellulose chemistry and its applications Ellis Horwood Limited 1987
- Baley Christophe Busnel Frederic Grohens Yves Sire Olivier “Influence of chemical treatments on surface properties and adhesion flax fiber-polyester resin.” Composites: Part A 37 1626 1637 2006
- Van de Weyenberg I. TRuong T. Chi Vangrimde B. Verpoest I. “Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment.” Composite Part A 37 1368 1376 2006
- Li X. Panigrahi S.A. Tabil L.G. Crerar W.J. “Flax fiber-reinforced composites and the effect of chemical treatments on their properties.” 2004 North Central ASAE/CSAE Conference 2004
- Beckermann G.W. Pickering K.L. “Engineering and evaluation of hemp fiber reinforced polypropylene composites: Fibre treatment and matrix modification.” Composites: Part A 39 979 988 2008
- Richardson MOW Santana MTJ Hague J “Natural fibre composites-the potential for the Asian markets.” Progress in Rubber, Plastics and Recycling Technology 14 174 188 1998
- Karus M Kaup M “Natural fibres in the European automotive industry.” Journal of Industrial Hemp 7 117 129 2002
- Madsen, B. Lilholt, H. “Physical and mechanical properties of unidirectional plant fiber composites- an evaluation of influence of porosity.” Composite Science and Technology 63 1265 1272 2003
- Arbelaiz, A. Fernandez, B. Valea, A. Mondragon, V.I. “Mechanical properties of short flax fiber bundle/poly (e-caprolactone) composites: Influences of matrix modification and fiber content.” Carbohydrate Polymers 64 224 232 2006
- Weyenberg, V. Truong, T.C. Vangrimde, B. Verpoest, I. “Improving the properties of UD flax fiber reinforced composites by applying an alkaline fiber treatment.” Composites: Part A 37 1368 1376 2006
- Baley, C. Perrot, Y. Busnel, F. Guezenoc, H. Davis, P. “Transverse tensile behavior of unidirectional plies reinforced with flax fibers.” Materials Letters 60 2984 987 2006
- Goutianos, S. Peijs, T. Nystrom, B. Skrifvars, M. “Development of Flax Fiber based Textile Reinforcements for Composite Applications.” Applied Composite Material 13 199 215 2006
- Goering H.K. Van Soezt P.J. Forage Fiber Analysis. Agr. Handbook 379 ARS, USDA 1970
- Van de Weyenberg I. TRuong T. Chi Vangrimde B. Verpoest I. “Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment.” Composite Part A 37 1368 1376 2006