Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

An Optical Investigation of Ignition Processes in Fuel Reactivity Controlled PCCI Combustion

Journal Article
2010-01-0345
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2010-01-0345
Published April 12, 2010 by SAE International in United States
An Optical Investigation of Ignition Processes in Fuel Reactivity Controlled PCCI Combustion
Sector:
Citation: Splitter, D., Kokjohn, S., Rein, K., Hanson, R. et al., "An Optical Investigation of Ignition Processes in Fuel Reactivity Controlled PCCI Combustion," SAE Int. J. Engines 3(1):142-162, 2010, https://doi.org/10.4271/2010-01-0345.
Language: English

References

  1. Turns S. R. “An introduction to Combustion: Concepts and Applications” WCB/McGraw-Hill Boston 2000
  2. Bression, G. Soleri, D. Savy, S. Dehoux, S. D. et al. “A Study of Methods to Lower HC and CO Emissions in Diesel HCCI,” SAE Int. J. Fuels Lubr. 1 1 37 49 2008
  3. Hardy, W.L. Reitz, R.D. “A Study of the Effects of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion,” SAE Technical Paper 2006-01-0026 2006
  4. Opat, R. Ra, Y. Gonzalez D, M.A. Krieger, R. et al. “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine,” SAE Technical Paper 2007-01-0193 2007
  5. Yokota, H. Kudo, Y. Nakajima, H. Kakegawa, T. et al. “A New Concept for Low Emission Diesel Combustion,” SAE Technical Paper 970891 1997
  6. Sun Y. “Diesel combustion optimization and emissions reduction using adaptive injection strategies (AIS) with improved numerical models” University of Wisconsin-Madison 2007
  7. Kamimoto, T. Bae, M.-H. “High Combustion Temperature for the Reduction of Particulate in Diesel Engines,” SAE Technical Paper 880423 1988
  8. Pickett, L.M. Siebers, D.L. “Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion,” SAE Technical Paper 2004-01-1399 2004
  9. Akihama, K. Takatori, Y. Inagaki, K. Sasaki, S. et al. “Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature,” SAE Technical Paper 2001-01-0655 2001
  10. Liu H. Yao M. Zhang B. Zheng Z. “Effects of inlet pressure and octane numbers on combustion and emissions of a homogeneous charge compression ignition (HCCI) engine” Energy & Fuels 22 4 2207 2215 2008
  11. Christensen, M. Hultqvist, A. Johansson, B. “Demonstrating the Multi Fuel Capability of a Homogeneous Charge Compression Ignition Engine with Variable Compression Ratio,” SAE Technical Paper 1999-01-3679 1999
  12. Inagaki, K. Fuyuto, T. Nishikawa, K. Nakakita, K. et al. “Dual-Fuel PCI Combustion Controlled by In-Cylinder Stratification of Ignitability,” SAE Technical Paper 2006-01-0028 2006
  13. Bessonette, P.W. Schleyer, C.H. Duffy, K.P. Hardy, W.L. et al. “Effects of Fuel Property Changes on Heavy-Duty HCCI Combustion,” SAE Technical Paper 2007-01-0191 2007
  14. Kokjohn, S.L. Hanson, R.M. Splitter, D.A. Reitz, R.D. “Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending,” SAE Technical Paper 2009-01-2647 2009
  15. Hanson, R.M. Splitter, D.A. Kokjohn, S.L. Reitz, R.D. “An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine,” SAE Technical Paper 2010-01-0864 2010
  16. Rein K D. Sanders S.T. Lowery S. L. Jiang E. Y. Workman J.J. Jr. “In-Cylinder Fourier-transform infrared spectroscopy” Measurement Science and Technology 19 2008 5
  17. Rein, K.D. Bartula, R.J. Sanders, S.T. “Interferometric Techniques for Crank-Angle Resolved Measurements of Gas Spectra in Engines,” SAE Technical Paper 2009-01-0863 2009
  18. Summers D.P. Abrams M.C. Brault J.W. “Fourier Transform Spectrometry” Academic Press 2001
  19. Amsden A. A. “KIVA-3v, release 2, improvements to KIVA-3v” 1999
  20. Abani, N. Kokjohn, S. Park, S.W. Bergin, M. et al. “An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations,” SAE Technical Paper 2008-01-0970 2008
  21. Abani N. Munnannur A. Reitz R. D. “Reduction of numerical parameter dependencies in diesel spray models” ASME Internal Combustion Engine Division 2007 Fall Technical Conference 130 3 2008
  22. Han Z. Reitz R. D. “Turbulence modeling of internal combustion engines using RNG k-ε models” Combustion Science and Technology 106 1995
  23. Ra Y. Reitz R. D. “A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuels” Combustion and Flame 155 713 738 2008
  24. Kong S.-C. Sun Y. Reitz R. D. “Modeling diesel spray flame lift-off, sooting tendency and NOx emissions using detailed chemistry with phenomenological soot model” ASME Journal of Gas Turbines and Power 129 245 251 2007
  25. Hiroyasu, H. Kadota, T. “Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines,” SAE Technical Paper 760129 1976
  26. Frenklach M. Bowman T. Smith G. Gardiner B. 2000 http://www.Me.Berkeley.Edu/gri-mech/
  27. Abraham, J. “What is Adequate Resolution in the Numerical Computation of Transient Jets?,” SAE Technical Paper 970051 1997
  28. Abraham J. “Entrainment characteristics of transient jets” Numerical Heat Transfer 30 347 364 1996
  29. Beale J. C. Reitz R. D. “Modeling spray atomization with the Kelvin-Helmholtz/Rayleigh-Taylor hybrid model” Atomization and Sprays 9 623 650 1999
  30. Munnannur A. “Droplet collision modeling in multi-dimensional engine spray computations” Mechanical Engineering University of Wisconsin-Madison 2007
  31. O'Rourke, P.J. Amsden, A.A. “A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines” SAE Technical Paper 961961 1996
  32. O'Rourke, P.J. Amsden, A.A. “A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model,” SAE Technical Paper 2000-01-0271 2000
  33. Klingbiel, A.E. “Mid-IR laser absorption diagnostics for hydrocarbon vapor diagnostics in harsh environments” Stanford University 2007
  34. Rothman a L.S. Gordon a I.E. Barbe A. et. al. “The HITRAN 2008 molecular spectroscopic database” Journal of Quantitative Spectroscopy & Radiative Transfer 110 2009 533 572
  35. Ando, H. Sakai, Y. Kuwahara, K. “Universal Rule of Hydrocarbon Oxidation,” SAE Technical Paper 2009-01-0948 2009
  36. Westbrook, C. K. Chemical Kinetics of Hydrocarbon Ignition in Practical Combustion Systems” Proceedings of the Combustion Institute 28 2000 1563 1577
  37. Meyers A. M. “High Spectral Resolution Emission Thermometry for Combustion Applications” University of Wisconsin Madison 2005
  38. Kranendonk, L.A. Caswell, A.W. Myers, A.M. Sanders, S.T. “Wavelength-Agile Laser Sensors for Measuring Gas Properties in Engines,” SAE Technical Paper 2003-01-1116 2003

Cited By

Recommended Content

Technical Paper Threedimensional Computations for Flowfields in DI Piston Bowls
Technical Paper Divided-Chamber Diesel Engine, Part II: Experimental Validation of a Predictive Cycle-Simulation and Heat Release Analysis
Technical Paper CFD Evaluation of Effects of Split Injection on Combustion and Emissions in a DI Diesel Engine