This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Cross Domain Co-Simulation Platform for the Efficient Analysis of Mechatronic Systems
Technical Paper
2010-01-0239
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Efficient integration of mechanics and microelectronics components is nowadays a must within the automotive industry in order to minimize integration risks and support optimization of the entire system. We propose in this work a cross domain co-simulation platform for the efficient analysis of mechatronic systems. The interfacing of two state-of-the-art simulation platforms provides a direct link between the two domains at an early development stage, thus enabling the validation and optimization of the system already during modeling phase. The proposed cross-domain co-simulation is used within our TEODACS project for the analysis of the FlexRay technology. We illustrate using a drive-by-wire use case how the different architecture choices may influence the system.
Recommended Content
Authors
Citation
Karner, M., Steger, C., weiss, R., Armengaud, E. et al., "A Cross Domain Co-Simulation Platform for the Efficient Analysis of Mechatronic Systems," SAE Technical Paper 2010-01-0239, 2010, https://doi.org/10.4271/2010-01-0239.Also In
References
- Ebert, C. Jones, C. “Embedded software: Facts, figures, and future” IEEE Computer 42 4 42 52 2009
- Leen, G. Hefferman, D. “Expanding Automotive Electronic Systems” IEEE Transaction on Computers 88 93 January 2002
- Kajtazovic, S. Steger, C. Schuhai, A. Pistauer, M. “Automatic Generation of a Verification Platform for Heterogeneous System Designs” Advances in Design and Specification Languages for SoCs Kluwer Academic Publishers Boston/Dordrecht/London 2005
- CISC Semiconductor Design+Consulting GmbH “System Architect Designer (SyAD®)” http://www.cisc.at/syad September 2009
- Schyr, C. Schaden, T. Schantl, R. “New Frontloading Potentials through Coupling of HiL-Simulation and Engine Test Bed” FISITA 2008 World Automotive Congress Munich, Germany September 2008 www.avl.com www.ipg.de
- Armengaud, E. Watzenig, D. Steger, C. Berger, H. Gall, H. Pfister, F. Pistauer, M. “TEODACS: A new Vision for Testing Dependable Automotive Communication Systems” Third International Symposium on Industrial Embedded Systems (SIES 2008) Montpellier, France June 2008 289 292
- Karner, M. Steger, C. Weiß, R. Armengaud, E. Watzenig, D. Knoll, G. “Verification and Analysis of Dependable Automotive Communication Systems” Thirteenth International Conference on Emerging Technologies and Factory Automation (ETFA 2008) Germany September 2008 444 447
- Armengaud, E. Watzenig, D. Karner, M. Steger, C. et al. “Combining the Advantages of Simulation and Prototyping for the Validation of Dependable Communication Architectures: the TEODACS Approach,” SAE Int. J. Passeng. Cars - Electron. Electr. Syst . 2 1 309 318 2009
- Pelz, G. Mechatronic Systems: Modelling and Simulation with HDLs Jon Wiley & Sons Ltd. Chisester, England 0-470-84979-7 2003
- Ashenden, P.J. Petersion, G.D. Teegarden, D.A. The System Designer's Guide to VHDL-AMS Morgan Kaufmann Publishers San Francisco, CA, USA 1-55860-749-8 2003
- Gerke, T. DeMeis, R. “The Virtual Vehicle: Part 1 - In-Vehicle Network Simulation and Analysis” Automotive DesignLine http://www.automotivedesignline.com/ United Business Media London, United Kingdom January 2009
- Gerke, T. DeMeis, R. “The Virtual Vehicle: Part 2 - Early Validation of Vehicle Electrical Systems and Power Management” Automotive DesignLine http://www.automotivedesignline.com/ United Business Media London, United Kingdom February 2009
- Gerke, T. Lagerqvist, S. DeMeis, R. “The Virtual Vehicle: Part 3 - Developing Robust Wiring Harnesses” Automotive Design Line[Online] http://www.automotivedesignline.com/ United Business Media London, United Kingdom March 2009
- Gerke, T. Lehmann, F. “The Virtual Vehicle: Part 4 - Automotive Design and Optimization of Electrical Fuel Injection Systems” Automotive DesignLine [Online] http://www.automotivedesignline.com/ United Business Media London, United Kingdom April 2009
- Synopsis, Inc. “MAST: The Analog, Mixed-Technology and Mixed-Signal HDL for Saber” http://www.synopsys.com/tools/sld/mechatronics/saber/pages/mast.aspx Synopsis, Inc. Mountain View, CA, USA 2009
- Ausejo, S. Suescun, A. Celigüeta, J.T. Moser, E. Charlot, J.J. “A Methodology for Model Interchange and Simulation of Mechatronic Systems” Proceedings of the 9th Mediterranean Conference on Control and Automation Dubrovnik, Croatia 953-6037-34-3 2001
- Modelica Association “Modelica® - A Unified Object-Oriented Language for Physical Systems Modeling Language Specification”, Version 3.1 Sweden 2009
- Grimm, C. Barnasconi, M. Vachoux, A. Einwich, K. “An Introduction to Modeling Embedded Analog/Mixed-Signal Systems using SystemC AMS Extensions” Open SystemC Initiative (OSCI) June 2008
- Karner, M. Steger, C. Weiß, R. Armengaud, E. “Optimizing HW/SW Co-Simulation based on Run-Time Model Switching” Forum on specification and Design Languages (FDL 2009) 6 September 2009
- Armengaud, E. Tengg, A. Karner, M. Steger, C. Weiß, R. Kohl, M. “Moving Beyond the Component Boundaries for Efficient Test and Diagnosis of Automotive Communication Architectures” Conference on Emerging Technologies and Factory Automation (ETFA 2009) 8 September 2009
- IPG Automotive GmbH “APO Library Reference Manual” Karlsruhe, Germany December 2004