This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Endurance Testing and FE Analysis of Four Wheeler Automobile Stabilizer Bar
Technical Paper
2009-26-0066
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SIAT 2009
Language:
English
Abstract
Durability of automobile stabiliser bar is assessed in the present study. Finite element analysis of the stabiliser bar is performed based on the experimental observations. Fatigue analysis is performed under cyclic loading. Fatigue analysis is performed for maximum cyclic loading conditions. Improvement is the fatigue life of stabilizer bar is analysed by shot peening. Special purpose machine is used to simulate the fatigue life of stabilizer bar. Commercial software ABAQUS is used for numerical simulation. Computational fatigue simulation software, fe-safe is used for the fatigue analysis to predict the fatigue life (number of cycles for crack initiation) and crack site location. Predicted results were compared with that of the physical test results for validation.
Recommended Content
Ground Vehicle Standard | Procedures for Using Standard Shot Peening Almen Test Strip |
Aerospace Material Specification | Shot Peening |
Technical Paper | Fatigue Life Reliability and Robustness of Aluminum Car Body U-Box Structure with Self-Piercing Riveted Joints |
Authors
- Senapathi P. - ProSIM R & D Center, India
- Shamasundar S. - ProSIM R & D Center, India
- Venugopala Rao G - ProSIM R & D Center, India
- Sachin B.M. - ProSIM R & D Center, India
- Krishna Srinivas - Tube Investments of India Ltd, India
- Dasari N. - Tube Investments of India Ltd, India
- Ponkshe Shripadraj - Mahindra and Mahindra Ltd, India
- Basava Raju - Mahindra and Mahindra Ltd, India
Citation
P., S., S., S., G, V., B.M., S. et al., "Endurance Testing and FE Analysis of Four Wheeler Automobile Stabilizer Bar," SAE Technical Paper 2009-26-0066, 2009, https://doi.org/10.4271/2009-26-0066.Also In
References
- Fan, H. Cai, et al. “Visteon Corporation, “Non-Linear Analysis of Tunable Compression Bushing for Stabilizer Bars” SAE technical papers 2004-01-1548
- Rer. Nat. Lutz manke, Advanced Engineering ThyssenKrupp Federn, Hagen “Weight Saving through High Stressed Tubular Stabilizer Bars” techno forum 2004
- Bayrakceken, H. Tasgetiren, S Aslantas, K. “Fracture of an Automobile Anti-roll Bar” Engineering Failure Analysis 13 2006 732 738
- Palma, E. S dos Santos, E. S. “Fatigue Damage Analysis in an Automobile Stabilizer Bar” Proceedings Instn Mech Engineers Volume 216 Part D: J Automobile Engineering 2002
- Draper, John safe technology limited UK “Modern Metal Fatigue” Volume 1 2008