Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Liquid Jet Deformation Induced by Cavitation in Nozzles of Various Shapes

Journal Article
2009-24-0157
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2009-24-0157
Published September 13, 2009 by Consiglio Nazionale delle Ricerche in Italy
Liquid Jet Deformation Induced by Cavitation in Nozzles of Various Shapes
Sector:
Citation: Sou, A., "Liquid Jet Deformation Induced by Cavitation in Nozzles of Various Shapes," SAE Int. J. Engines 2(2):694-702, 2010, https://doi.org/10.4271/2009-24-0157.
Language: English

References

  1. Bergwerk, W. Flow Pattern in Diesel Nozzle Spray Holes Proceedings of the Institution of Mechanical Engineers Vol. 173 25 1959 655 660
  2. Hiroyasu, H. Arai, M. Shimizu, M. Break-up Length of a Liquid Jet and Internal Flow in a Nozzle Proceedings of International Conference on Liquid Atomization and Spray Systems 91 (ICLASS 91) 1991 275 282
  3. Chaves, H. Knapp, M. Kubitzek, A. Obermeier, F. Schneider, T. Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles SAE Paper (1995), Paper No. 950290 645 657
  4. Soteriou, C. Andrews, R. Smith, R. Direct Injection Diesel Sprays and The Effect Cavitation and Hydraulic Flip on Atomization SAE Paper (1995), Paper No. 950080
  5. Collicott, S. H. Li, H. True-scale True-Pressure Internal Flow Visualization for Diesel Injectors SAE Paper (2006), Paper No. 2006-01-0890
  6. Tamaki, N. Shimizu, M. Hiroyasu, H. Enhancement of the atomization of a liquid jet by cavitation in a nozzle hole Atomization and Sprays Vol. 11 2 2001 125 137
  7. Wu, P.-K. Miranda, R. F. Faeth, G. M. Effects of Initial Flow Conditions on Primary Breakup of Nonturbulent and Turbulent Round Liquid Jets Atomization and Sprays Vol. 5 2 1995 175 196
  8. He, L. Ruiz, F. Effect of Cavitation on Flow and Turbulence in Plain Orifices for Highspeed Atomization Atomization and Sprays Vol. 5 6 1995 569 584
  9. Oda, T. Yasuda, Y. Experimental Investigation on Structure of Cavitating Flow and Velocity Field inside a 2-D Hole Nozzle Proceedings of 9 th International Conference on Liquid Atomization and Spray Systems (ICLASS 2003), (2003) Paper No. 12-5
  10. Sou, A. Tomiyama, A. Hosokawa, S. Nigorikawa, S. Maeda, T. Cavitation in a Two-Dimensional Nozzle and Liquid Jet Atomization (LDV Measurement of Liquid Velocity in a Nozzle) JSME International Journal, Series B Vol. 49 4 2006 1253 1259
  11. Sou, A. Hosokawa, S. Tomiyama, A. Effects of Cavitation in a Nozzle on Liquid Jet Atomization International Journal of Heat and Mass Transfer Vol. 50 17–18 2007 3575 3582
  12. Sou, A. Maulana, M. I. Hosokawa, S. Tomiyama, A. Ligament Formation Induced by Cavitation in a Cylindrical Nozzle Journal of Fluid Science and Technology Vol. 3 5 2008 633 644
  13. Sou, A. Maulana, M. I. Isozaki, K. Hosokawa, S. Tomiyama, A. Effects of Nozzle Geometry on Cavitation in Nozzles of Pressure Atomizers Journal of Fluid Science and Technology Vol. 3 5 2008 622 632
  14. Gelalles, A. G. March, E. E. Effect of Orifice Length-Diameter Ratio on the Coefficient of Discharge of Fuel-Injection Nozzles NACA Report (1931), No. 369
  15. Gelalles, A G. Effect of Orifice Length-Diameter Ratio on Fuel Sprays for Compression-Ignition Engines NACA Report (1933), No. 402
  16. Karasawa, T. Tanaka, M. Abe, K. Shiga, S. Kurabayashi, T. Effect of Nozzle Configuration on the Atomization of a Steady Spray Atomization and Sprays Vol. 2 1992 411 426
  17. Arai, M. Shimizu, M. Hiroyasu, H. Similarity between the Break-up Lengths of a High Speed Liquid Jet in a Atmospheric and Pressurized Conditions Proceedings of International Conference on Liquid Atomization and Spray Systems 91 (ICLASS 91) 1991 563 570
  18. Tamaki, N. Shimizu, M. Nishida, K. Hiroyasu, H. Effects of Cavitation and Internal Flow on Atomization of a Liquid Jet Atomization and Sprays Vol. 8 1998 179 197
  19. Daikoku, M. Furudate, H. Tanno, S. Inamura, T. Effect of Cavitation in the Cylindrical Nozzle on the Liquid Breakup Process Proceedings of International Conference on Liquid Atomization and Spray Systems 2003 (ICLASS 2003) (2003), Paper No. 12-7
  20. Daikoku, M. Furudate, H. Noda H. Inamura T. Effect of Cavitation in the Two-dimensional Nozzle on Liquid Breakup Process Proceedings of International Conference on Liquid Atomization and Spray Systems (ICLASS 2003) (2003), Paper No. 17-6
  21. Iida, H. Matsumura, E. Tanaka, K. Senda, J. Fujimoto, H. Maly, R. R. Effects of Internal Flow in a Simulated Diesel Injection Nozzle on Spray Atomization Proceedings of 8th International Conference on Liquid Atomization and Spray Systems (ICLASS 2000) 2000 179 197
  22. Baz, I. Champoussin, J.-C. Lance, M. Marie, J.-L. Investigation of The Cavitation in High Pressure Diesel Injection Nozzles Proceedings of ASME FEDSM '02 (2002), FEDSM2002-31015
  23. Miranda, R. Chaves, M. Martin, U. Obermeier, F. Cavitation In a Transparent Real Size VCO Injection Nozzle Proceedings of International Conference on Liquid Atomization and Spray Systems 2003 (ICLASS 2003) (2003), Paper No. 12-6
  24. Nurick, W. H. Orifice Cavitation and Its Effect on Spray Mixing Journal of Fluid Engineering, Transactions of ASME 1976 681 687
  25. Payri, F. Bermudez, V. Payri, R. Salvador, F. J. The Influence of Cavitation in on the Internal Flow and the Spray Characteristics in Diesel Injection Nozzles Fuel Vol. 83 2004 419 431

Cited By