This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Parameter Estimation for Physical Based Air Path Models of Turbocharged Diesel Engines — An Experience Based Guidance
Journal Article
2009-24-0134
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Citation:
Mrosek, M., Zahn, S., and Isermann, R., "Parameter Estimation for Physical Based Air Path Models of Turbocharged Diesel Engines — An Experience Based Guidance," SAE Int. J. Engines 2(2):570-583, 2010, https://doi.org/10.4271/2009-24-0134.
Language:
English
References
- Burkhardt Thomas Dingl Jürgen Schopp Gerhard Schwarz Roland Function development and calibration for charged engines — model based from concept to mass production Tagung Elektronisches Management motorischer Fahrzeugantriebe, Darmstadt, Germany, March 3–4, 2009 2009
- Schwarte Anselm Schneider Dirk Nienhoff Michael Kopold Richard Kornienko Andrei Koops Ingo Birkner Christian Physical model based control of the airpath of diesel engines for future requirements at — Automatisierungstechnik 55 7 346 351 2007
- Heywood John B. Internal Combustion Engine Fundamentals McGraw-Hill New York, St. Louis, San Francisco, Auckland 1988
- Guzzella Lino Onder Christopher H. Introduction to Modeling and Control of Internal Combustion Engine Systems Springer Berlin, Heidelberg, New York 2004
- Justi Eduard W. Spezifische Wärme — Enthalpie, Entropie und Dissoziation technischer Gase Springer Berlin 1938
- Zahn Sebastian Isermann Rolf Crank angle synchronous modelling and real-time simulation of diesel engines for ecu function development and testing 9th Int. Symp. on Advanced Vehicle Control, Kobe, Japan, Oct. 6–9, 2008
- Robert Bosch GmbH Automotive Aftermarket Heiβfilm-Luftmassenmesser, Typ HFM 6 Karlsruhe 2008
- Tränkler H. R. Obermeier E. Sensortechnik Springer Berlin, Heidelberg, New York 1998
- Rössel Messtechnik GmbH Produktinformation Mantelthermoelemente Dresden 2009
- Bertola Andrea Fürholz Andreas Stadler Jürg Höwing Jens Huber Karl Hauber Johann Gossweiler Christoph New opportunities for gas exchange analysis using piezoresistive high-temperature absolute pressure sensors Technical report Kistler 2008
- Früh Karl Friedrich Maier Uwe Schaudel Dieter Handbuch der Prozessautomatisierung: Prozessleittechnik für verfahrenstechnische Anlagen Oldenbourg, München 4. aufl. edition 2008
- Isermann Rolf Digitale Regelsysteme — Band 1: Grundlagen, Deterministische Regelungen Springer Berlin, Heidelberg, New York, London Paris, Tokyo 1988
- Kiencke Uwe Eger Ralf Messtechnik Springer Berlin, Heidelberg, New York, London Paris, Tokyo 6. aufl. edition 2004
- dSPACE GmbH DS2201 Multi-I/O Board Paderborn 2008
- Isermann Rolf Identifikation dynamischer Systeme 1 — Grundlegende Methoden Springer Berlin, Heidelberg 1992
- Ward, M.C. Brace, C.J. Vaughan, N.D. Ceen, R. Hale, T. Kennedy G. Investigation of ‘sweep’ mapping approach on engine testbed SAE World Congress, Detroit, Michigan, March 4–7, 2002 2002-01-0615
- Schwarte, A. Hack, L. Isermann, R. Nitzke, H.-G. Jeschke, J. Piewek J. Automated calibration of engine control units with continuous engine data recording Steuerung und Regelung von Fahrzeugen und Motoren — AUTOREG 2004, Wiesloch, Germany, March 2–3, 2004 651 663
- Leithgöb, R. Bollig, M. Büchel, M. Henzinger F. Methodology for efficient calibration of model based ecu structures 1st Int. Symp. on Development Methodology, Wiesbaden, Germany, Oct. 11–12, 2005 195 208
- Nelles Oliver Nonlinear System Identification Springer Berlin, Heidelberg, New York 2001
- Hafner Michael Modellbasierte stationäre und dynamische Optimierung von Verbrennungsmotoren am Motorprüfstand unter Verwendung neuronaler Netze Number Nr. 482 in Fortschr.-Ber. VDI Reihe 12. VDI-Verl. Düsseldorf 2002
- Zimmerschied Ralf Isermann Rolf Nonlinear time constant estimation and dynamic compensation of temperature sensors 2007
- Isermann R. Jantschke H. Das regeldynamische Verhalten wasser- und dampfbeheizter Kreuzstromwärmeübertrager in Klimaanalagen Regelungstechnik und Prozeβ-Datenverarbeitung 1970