This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Control of the Diesel Combustion Process via Advanced Closed Loop Combustion Control and a Flexible Injection Rate Shaping Tool

Journal Article
2009-24-0114
ISSN: 1946-3952, e-ISSN: 1946-3960
Published September 13, 2009 by Consiglio Nazionale delle Ricerche in Italy
Control of the Diesel Combustion Process via Advanced Closed Loop Combustion Control and a Flexible Injection Rate Shaping Tool
Sector:
Citation: Hinkelbein, J., Sandikcioglu, C., Pischinger, S., Lamping, M. et al., "Control of the Diesel Combustion Process via Advanced Closed Loop Combustion Control and a Flexible Injection Rate Shaping Tool," SAE Int. J. Fuels Lubr. 2(2):362-375, 2010, https://doi.org/10.4271/2009-24-0114.
Language: English

References

  1. Albrecht, W. Dohle, U. Gombert, R. Krauss, J. Leonhard, R. Wannenwetsch, P. Innovative BOSCH common rail injection system CRSN4.2 for the new generation of DaimlerChrysler heavy duty diesel-engines 28. Wiener Motorensysposium 2007
  2. Andres, D. Hengen, H. Pandit, M. Optimierend iterativ lernende Regelungen Automatisierungstechnik 50 2002 No. 3 112 118
  3. Arimoto, S. Kawamura, S. Miyazaki, F. Bettering Operation of Robots by Learning Journal of Robotic Systems 1 1984 No. 2 123 140
  4. Desantes, J.M. Benajes, J. Molina, S. Gonzáles, C.A. The modification of the fuel injection rate in heavy-duty diesel engine Applied Thermal Engineering 24 2004 2701 2714
  5. Gangopadhyay, A. Matekunas, F. Battiston, P. Szymkowicz, P. Pinson, J. Landsmann, G. Control of Diesel HCCI Modes using Cylinder Pressure- Based Controls FISITA World Automotive Congress Yokohama 2006
  6. Hadler, J. Rudolph, F. Dorenkamp, R. Stehr, H. Düsterdiek, T. Hilzendeger, J. Mannigel, D. Kranzusch, S. Veldten, B. Kösters, M. Specht, A. Der neue 2.0l TDI- Motor von Volkswagen zur Erfüllung niedrigster Abgasgrenzwerte 29. Internationales Wiener Motorensymposium Wien 2008
  7. Heuer, S. Verbrennungsgeräusch des direkteinspritzenden Hubkolbenmotors RWTH Aachen University Dissertation 2001
  8. Juneja, H. Ra, Y. Reitz, R. D. Optimization of Injection Rate Shape Using Active Control of Fuel Injection SAE Technical Paper 2004-01-0530
  9. Körfer, T. Herrmann, O. E. Lamping, M. Ruhkamp, L. Pischinger, S. Schnorbus, T. Zukünftige, robuste Regelkonzepte zur Emissionskontrolle bei Dieselmotoren in hochdynamischen Testzyklen 28. Internationales Wiener Motorensymposium Wien 2007
  10. Kositza, N. Analyse und Regelung von Schwankungen der Leerlaufdrehzahl eines Dieselmotors Düsseldorf VDI Verlag 2004
  11. Kuang, B. Wang, Y. Tan, Y. L. An H ∞ Controller Design for Diesel Engine Systems International Conference on Power System Technology, 2000, Proceedings PowerCon 2000
  12. Pandit, M. Buchheit, K.-H. Optimizing Iterative Learning Control of Cyclic Production Processes with Application to Extruders IEEE Transactions on control system technology Vol. 7 No. 3 May 1999
  13. Pischinger, S. Schwaderlapp, M. Development Aspects to Increase Specific Power Output of Gasoline and Diesel Engines 6. Dresdner Motorenkolloquium Dresden 2005
  14. Rockel, H. Analyse und Synthese parametrischer Iterativ Lernender Regelungen Düsseldorf VDI Verlag 2006
  15. Ruhkamp, L. Krüger, M. Schönfeld, S. Measures for Further Reduction of Raw Emissions of HD- Diesel-Engines 26. Wiener Motorensysposium 2005
  16. Schmücker, J. Pischinger, S. Laumen, H.-J. Krüger, M. Möglichkeiten zur Einspritzverlaufs- formung bei NFZ-Motoren 7. Tagung Motorische Verbrennung, Haus der Technik München 2005
  17. Schwaderlapp, M. Bick, W. Duesmann, M. Kauth, J. 200 bar Peak Pressure - Design Solutions for Future Diesel Engine Blocks MTZ worldwide 2/2004 Volume 65
  18. Tanabe, K. Kohketsu, S. Nakayama, S. Effects of Fuel Injection Rate Control on Reduction of Emissions and Fuel Consumption in a Heavy Duty DI Diesel Engine SAE Technical Paper 2005-01-0907
  19. Tracht, R. Thorausch, M. Stabilität von Regelkreisen mit periodisch veränderlicher Totzeit Automatisierungstechnik 52 2004 Nr. 12 562 568

Cited By