This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Cycle-by-Cycle Analysis, Knock Modeling and Spark-Advance Setting of a “Downsized” Spark-Ignition Turbocharged Engine

Journal Article
ISSN: 1946-3936, e-ISSN: 1946-3944
Published September 13, 2009 by Consiglio Nazionale delle Ricerche in Italy
Cycle-by-Cycle Analysis, Knock Modeling and Spark-Advance Setting of a “Downsized” Spark-Ignition Turbocharged Engine
Citation: Bozza, F., Siano, D., and Torella, E., "Cycle-by-Cycle Analysis, Knock Modeling and Spark-Advance Setting of a “Downsized” Spark-Ignition Turbocharged Engine," SAE Int. J. Engines 2(2):381-389, 2010,
Language: English


  1. Bozza F. Fontana G. Galloni E. Torella E. “3D-1D Analyses of the Turbulent Flow Field, Burning Speed and Knock Occurrence in a Turbocharged SI Engine” SAE Paper 2007-24-0029 SAE Transactions, Journal of Engines
  2. Sawamoto K Kawamura Y Kita T Matsushita K “Individual cylinder knock control by detecting cylinder pressure” SAE paper 871911 1987
  3. Litak G. ·Kaminski T. Czarnigowski J. ·Grzegorz A K. Wendeker G. M. “Combustion process in a spark ignition engine: analysis of cyclic peak pressure and peak pressure angle oscillations” Meccanica 44 1 11 10.1007/s11012-008-9148-0 2009
  4. Galloni E. “Analyses about parameters that affect cyclic variation in a spark ignition engine” Applied Thermal Engineering 29 1131 1137 2009
  5. Heywood J.B. “Internal Combustion Engine Fundamentals” McGraw-Hill Int. editions 1988
  6. Bozza F. Torella E. “The Employment of a 1D Simulation Model for the A/F Ratio Control in a VVT Engine” SAE Paper 2003-01-0027 2003 SAE Transactions, Journal of Engines
  7. Wagner R. M. Drallmeier J. A. Daw C. S. Origins of Cyclic Dispersion Patterns in Spark Ignition Engines Proceedings of the 1998 Technical Meeting of the Central States Section of the Combustion Institute
  8. Bozza F. Gimelli A. Strazzullo L. Torella E. Cascone C “Steady-state and Transient Operation Simulation of a ‘Downsized’” Turbocharged SI Engine” SAE Paper 2007-01-0381 2007
  9. Bozza F. Gimelli A. Tuccillo R. “The Control of a VVA Equipped SI-Engine Operation by Means of 1D Simulation and Mathematical Optimization” SAE Paper 2002-01-1107 2002 SAE Transactions, Journal of Engines
  10. Bozza F. Gimelli A. Siano D. Torella E. Mastrangelo G. “A Quasi-Dimensional Three-Zone Model for Performance and Combustion Noise Evaluation of a Twin-Spark High-EGR Engine” SAE Paper 2004-01-0619 2004 SAE Transactions, Journal of Engines
  11. Bozza F. Gimelli A. Merola S. S. Vaglieco B. M. “Validation of A Fractal Combustion Model through Flame Imaging” SAE Paper 2005-01-1120 SAE Transactions, Journal of Engines
  12. Torregrosa A.J. Broatch A. Martin J. Monelletta L. “Combustion noise level assessment in direct injection Diesel engines by means of in-cylinder pressure components” Meas. Sci. Technol. 18 2131 2142 10.1088/0957-0233/18/7/045 2007
  13. Payri, F Broatch, A Tormos B Marant, V “New methodology for in-cylinder pressure analysis in direct injection diesel engines—application to combustion noise” Meas. Sci. Technol. Vol. 16 540 547 10.1088/0957-0233/16/2/029 2005
  14. Poulos S.G. Heywood J.B. “The Effect of Chamber Geometry on Spark-Ignition Engine Combustion” SAE paper 830334 1983
  15. GT-Power User's Manual and Tutorial, GT-SUITE ™ Version 6.1 Gamma Technologies
  16. Hu H. Keck J. “Autoignition of Adiabatically Compressed Combustible Gas Mixtures” SAE 872110 1987
  17. Keck J. Hu H. “Explosions of Adiabatically Compressed Gases in a Constant Volume Bomb” 21 st International Symposium on Combustion, The Combustion Institute 521 529 1986
  18. Tanaka S. Ayala F. Keck J. “A Reduced Chemical Kinetic Model for HCCI Combustion of Primary Reference Fuels” Combustion & Flame 132 219 239 2003
  19. Hudson C. Gao X. Stone R. “Knock measurement for fuel evaluation in spark ignition engines” Fuel 80 395 407 2001
  20. Samimy H. Rizzoni G. “Mechanical Signature Analysis Using Time-Frequency Signal Processing: Application to Internal Combustion Engine Knock Detection” Proceedings of the IEEE Vol. 84 No. 9 1996

Cited By