This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Phenomenological Multi-Step Modeling of Diesel Injection and Combustion
Technical Paper
2009-24-0007
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A previously developed injection system model has been enhanced including a quasi-dimensional, multi-zone, direct injection (DI) diesel combustion model, with the aim of taking into account the actual injection process, the spray formation and the droplet heating-vaporization processes. Such a goal is obtained by means of the integration of different modeling approaches. In a commercial simulation environment, a lumped parameter mechanical-hydraulic scheme is used to model the injection process, in terms of fuel flow rate and injection pressure. The spray formation processes and the droplet vaporization phenomena are then implemented in a self developed computation code, accounting for finite thermal conductibility of the liquid phase fuel. The coupling among the models allows for a detailed representation of the involved phenomena at each simulation step (e.g. fuel time pressure history, fuel properties, atomization, evaporation ambient condition); at the same time, it is possible to evaluate the operation of the injection system on the basis of atomization, vaporization and combustion behavior. The results of the numerical prediction are compared to experimental data referred to a DI diesel engine.
Authors
Topic
Citation
Chiatti, G., Chiavola, O., and Palmieri, F., "Phenomenological Multi-Step Modeling of Diesel Injection and Combustion," SAE Technical Paper 2009-24-0007, 2009, https://doi.org/10.4271/2009-24-0007.Also In
References
- Chiatti, G. Chiavola, O. Palmieri, F. Spray Modeling for Diesel Engine Performance Analysis presented at SAE World Congress, 2009-01-0835 2009
- Jung, D. Assanis, D. N. Multi-zone DI diesel spray combustion model for cycle simulation studies of engine performance and emissions presented at SAE World Congress, 2001-01-1246 2001
- Hardenberger H.O. et Al. An Empirical Formula for Computing Rise delay of a Fuel from its Cetane Number and From the Relevant Parameters of Direct Injection Diesel Engines presented at SAE International Congress & Exposition, 790493 1979
- Faeth G. M. 1983 Evaporation and Combustion of Sprays. Prog. Energy Combust. Sci. 9
- Faeth G. M. 1987 Mixing, Transport and Combustion in Sprays. Prog. Energy Combust. Sci. 13
- Law C. K. 1975 A Theory for Monodisperse Spray Vaporization in Adiabatic and Isothermal Systems International Journal of Heat and Mass Transfer 18
- Law C. K. 1988 On the Controlling Parameter in the Gasification Behavior of Multicomponent Combustion and Flame 73
- Sirignano W. A. 1983 Fuel Droplet Vaporization and Spray Combustion Theory Prog. Energy Combust. Sci. 9
- Sirignano, W. A. Molecular Mixing in a Turbulent Flow: Some Fundamental Considerations presented at AIAA 22th Aerospace Sciences Meeting 1984
- Abramzon, B. Sirignano W. A. 1989 Droplet vaporization model for spray combustion calculations International Journal Heat and Mass Transfer 32
- Prakash, S. Sirignano W. A. 1978 Liquid Fuel Droplet Heating with Internal Circulation International Journal of Heat and Mass Transfer 21
- Tong, A. Y. Sirignano W. A. 1986 Multi- component Transient Droplet Vaporization with Internal Circulation: Integral Equation Formulation and Approximate Solution Numerical Heat Transfer 10
- Chin, J. S. Lefebvre, A. H. The Role of the Heat- Up Period in Fuel Drop Evaporation presented at AIAA 21th Aerospace Sciences Meeting 1983
- Chin, J. S. Durrett, R. Lefebvre A. H. 1984 The Interdependence of Spray Characteristics and Evaporation History of Fuel Sprays” Journal of Engineering for Gas Turbines and Power 106
- Sazhin S. 2006 Advanced Models of Fuel Droplet Heating and Evaporation Progress in Energy and Combustion Science 32
- Abdelghaffar, W. A. Sazhin, S. S. Heikal, M. R. Sazhina, E. M. Krutitskii P. A. 2005 Advanced Gas- Droplets Heat Transfer Models and Their Applications Progress in Energy and Combustion Science 32
- Sazhin, S. S. Krutitskii, P. A. Martynov, S.B. Mason, D. Heikal, M. R. Sazhina, E. M. Transient Heating of a Semitransparent Droplet School of Engineering, Faculty of Science and Engineering University of Brington (UK)
- Sazhin, S. S. Sazhina, E. M. Heikal, M. R. Krutitskii, P. A. Dombrovsky, L. A. Pozorski, J. Modelling of Diesel Fuel sprays: Penetration, Heating, Autoignition presented at the Second Mediterranean Combustion Symposium 2002
- Sazhin, S. S. Abdelghaffar, W. A. Krutitskii, P. A. Sazhina, E. M. Mikhalovsky, S. V. Meikle S. T. 2004 Radiative Heating of Semitransparent Diesel Fuel Droplets ASME Journal of Heat Transfer 126 1
- Varanasi, K. K. Clack, H. L. Miller R. S. 2004 On Preferential Diffusion of Binary Component Liquid Droplets Evaporating in Two-Phase Mixing Layer International Journal of Multiphase Flow 30 10
- Atomization and Sprays Lefebvre, A. H. Hemisphere Publishing Corporation 1989 USA
- Dombrovsky, L. A. Sazhin S. S. 2003 A parabolic temperature profile model for heating of droplets Journal of Heat Transfer 125
- Hiroyasu, H. Arai, M. 1980 Fuel Spray Penetration and Spray Angle of Diesel Engines JSAE 21
- Kyriakides, S. C. Dent, J. C. Mehta, P. S. Phenomenological Diesel Combustion Model Including Smoke and NO Emission presented at SAE World Congress, 860330 1983
- Bazari, Z. A DI Diesel Combustion and Emission Predictive Capability for Use in Cycle Simulation presented at International Congress & Exposition, 920462 1992
- Gao, Z. Schreiber, W. A Multizone Analysis of Soot and NOx Emission in a D.I. Diesel Engine as a Function of Engine Load, Wall Temperature, and Intake Air O2 Content presented at ASME ICE conference 2000-ICE-314 2000
- Hiroyasu, H. Arai, M. Tabata, M. Empirical Equations for the Sauter Mean Diameter of a Diesel Spray presented at SAE International Congress & Exposition, 890464 1989
- Chiatti, G. Chiavola, O. Palmieri, F. Inline Pump Internal Flow Characterization for Optimized Diesel Injection presented at ASME ICEF conference, 1663 2008
- AMESim Tutorial and User Guide AMESim Technical Bulletins LMS
- Tanaka, Y. Hosokawa, H. Kubota, H. Makita, T. 1991 Viscosity and Density of Binary Mixtures of Cyclohexane with n-Octane, n-Dodecane, and n- Hexadecane Under High Pressures International Journal of Thermophysics 12 2
- Khasanshin, T. S. Shchamialiou, A. P. Poddubskij, O. G. 2003 Thermodynamic Properties of Heavy n-Alkanes in the Liquid State: n-Dodecane International Journal of Thermophysics 24 5
- Ball, S. J. Trusler, J. P. M. 2001 Speed of Sound of n-Hexane and n-Hexadecane at Temperatures Between 298 and 373 K and Pressures up to 100 MPa International Journal of Thermophysics 22 2
- Arnone, L. Boni, M. Manelli, S. Chiavola, O. Conforto, S. Recco, E. Diesel Engine Combustion Monitoring through Block Vibration Signal Analysis presented at SAE World Congress, 2009-01-0765 2009