This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Advantages and Challenges of Closed-Loop HIL Testing for Commercial and Off-Highway Vehicles
Technical Paper
2009-01-2841
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Hardware-in-the-loop (HIL) testing is used by commercial vehicle original equipment manufacturers (OEMs) in several fields of electronics development. HIL tests are a part of the standard development process for engine and machine control systems. For electronic control units (ECUs), not only the HIL test of the hardware but also the controller software validation is very important. For hardware diagnostics validation, a dynamic simulation of the real system could be omitted and an open-loop test of the controller is sufficient in most cases. For most controller software validation including OBD (on-board diagnosis) tests, detailed but real-time capable models have to be used.
This article describes the needs and challenges of models in hardware-in-the-loop (HIL) based testing, taking into account the wide range of commercial and off-highway vehicles. Starting with the commonalities and differences in applications it lists the model requirements and different approaches in modeling for closed-loop HIL testing to help to find the most suitable models for the HIL application. Finally a comparison of testing and development between HIL and other testing areas is provided.
Recommended Content
Technical Paper | Adding Unified Diagnostic Services over CAN to an HIL Test System |
Technical Paper | Hardware-In-The-Loop Simulation for ABS |
Technical Paper | Real-Time Simulation of Trucks for Hardware-in-the-Loop Applications |
Authors
Citation
Kluge, T., Allen, J., and Dhaliwal, A., "Advantages and Challenges of Closed-Loop HIL Testing for Commercial and Off-Highway Vehicles," SAE Technical Paper 2009-01-2841, 2009, https://doi.org/10.4271/2009-01-2841.Also In
References
- Adenmark M. Deter M. Schulte T. Testing Networked ECUs in a HIL Based Integration Lab SAE Commercial Vehicle Engineering, SAE Technical Paper Series, No. 2006-01-3495 2006
- Burrow W. Brun M. Schoulen K. Hybrid Drive for Mobile Machinery Special Edition ATZ 2009
- Zimmermann M. Kluge T. Einsatz der Hardware-in-the-Loop-Simulation und der Testautomatisierung in der Nfz-Motorelektronik-Entwicklung AUTOREG 2006
- Mark Yu (Caterpillar Inc.) Indestructable from the start dSPACE Magazine 1 2008
- Large Scale Application of J1939, SAE Off-Highway Engineering Magazine, 2000
- Stone M.L. McKee K.D. Formwalt C.W. Benneweis R.K. Pp. 1-17 in ISO 11783 An Electronic Communications Protocol for Agricultural Equipment: ASAE Distinguished Lecture # 23 Agricultural Equipment Technology Conference Louisville, Kentucky USA February 1999
- Waeltermann P. Hardware-in-the-Loop: The Technology for Testing Electronic Controls in Automotive Engineering, 6th Paderborn Workshop “Designing Mechatronic Systems” 2009
- Schulze T. Wiedemeier M. Schuette H. Crank Angle Based Diesel Engine Modeling for Hardwarein-the-Loop Applications with In-Cylinder Pressure Sensors SAE Technical Paper Series, No. 2007-01-1303 2007
- Schuette H. Waeltermann P. Hardware-in-the-Loop Testing of Vehicle Dynamics Controllers - A Technical Survey SAE Technical Paper Series, No. 2005-01-1660
- Pueschl T. Schulze T. Schuette H. Parameter Estimation for In-Cylinder Pressure-Based RealTime Engine Model 2009
- Haupt H. Echtzeitmodelle für den Test automotiver Steuergeräte, ASIM/GI-Fachgruppentreffen, Bremen 2007
- Krumm H. Parameterizing User-Defined Models Graphically. Hansen Automotive 11 2007
- Schuette H. Ploeger M. Hardware-in-the-Loop Testing of Engine Control Units - A Technical Survey SAE Technical Paper Series, No. 2007-01-050 2007
- Wagener A. Schulte T. Waeltermann P. Schuette H. Hardware-in-the-Loop Test Systems for Electric Motors in Advanced Powertrain Applications SAE Technical Paper Series, No. 2007-01-0498 2007
- Adenmark M. ASMs for Complete Truck Electronics Tests, dSPACE News 2008/1 Feb 2008 www.dspace.de
- ASM - Automotive Simulation Models: Product Information 2009 http://www.dspace.de/
- MotionDesk - 3D-Online Animation Tool: Product Information 2009 http://www.dspace.de
- Product Information CAT® On-Highway Engines, Caterpillar Inc. http://ohe.cat.com www.cat.com
- Emmission Technology Brochure, John Deere 2009 www.deere.com
- VW 2.0 l TDI mit Hochdruck und Niederdruck-AGR, Article from Motortechnische Zeitschrift (MTZ), 2008
- Product Information SCANIA Engines 2009 www.scania.com
- Product Information Daimler Truck Engines 2009 http://media.daimler.com
- Plianosm A. Stobart R. Modeling and Control of Diesel Engines Equipped with a Two-Stage Turbo-System SAE Technical Paper Series, No. 2008-01-1018 2008
- Product Information Cummins Engines 2009 www.cummins.com