This content is not included in your SAE MOBILUS subscription, or you are not logged in.

The Impact of Biodiesel on Injection Timing and Pulsewidth in a Common-Rail Medium-Duty Diesel Engine

Journal Article
2009-01-2782
ISSN: 1946-3936, e-ISSN: 1946-3944
Published November 02, 2009 by SAE International in United States
The Impact of Biodiesel on Injection Timing and Pulsewidth in a Common-Rail Medium-Duty Diesel Engine
Sector:
Citation: Bittle, J., Knight, B., and Jacobs, T., "The Impact of Biodiesel on Injection Timing and Pulsewidth in a Common-Rail Medium-Duty Diesel Engine," SAE Int. J. Engines 2(2):312-325, 2010, https://doi.org/10.4271/2009-01-2782.
Language: English

References

  1. Sheehan J. Camobreco V. Duffield J. Graboski S. Shapouri H. 1998 May Life cycle inventory of biodiesel and petroleum diesel for use in an urban bus: Final report. National Renewable Energy Laboratory NREL/SR-580-24089 UC Category 1503. Retrieved May 13 2009 http://www.nrel.gov/docs/legosti/fy98/24089.pdf
  2. Chang Y. Van Gerpen J. 1997 May Fuel properties and engine performance for biodiesel prepared from modified feedstocks SAE 971684
  3. Monyem A. Van Gerpen J. 2001 The effect of biodiesel oxidation on engine performance and emissions Biomass and Bioenergy 20 4 317 325
  4. Canakci M. Van Gerpen J. 2003 Comparison of engine performance and emissions for petroleum diesel fuel, yellow grease biodiesel, and soybean oil biodiesel Transactions of the ASAE 46 4 937 944
  5. Postrioti L. Battistoni M. Grimaldi C. Millo F. 2003 Injection strategies tuning for the use of bio-derived fuels in a common rail HSDI diesel engine SAE Transactions - Journal of Engines 112 2003-01-0768
  6. Alam M. Song J. Acharya R. Boehman A. Miller K. 2004 Combustion and emissions performance of low sulfur, ultra low sulfur and biodiesel blends in a DI diesel engine SAE Transactions - Journal of Fuels and Lubricants 113
  7. Suryawanshi G. Deshpande V. 2005 October Effect of injection timing retard on emissions and performance of a pongamia oil methyl ester fueled CI engine SAE 2005-01-3677
  8. Nagaraju V. Henein N. Quader A. Wu M. Bryzik W. 2008 Effect of biodiesel (B20) on performance and emissions in a single cylinder HSDI diesel engine SAE 2008-01-1401
  9. Tompkins B. Esquivel J. Jacobs T. 2009 April Performance parameter analysis of a biodiesel-fuelled medium duty diesel engine SAE 2009-01-0481
  10. Kousoulidou M. Fontaras G. Ntziachristos L. Samaras Z. 2009 April Evaluation of biodiesel blends on the performance and emissions of a common-rail light-duty engine and vehicle SAE 2009-01-0692
  11. Bittle J. Younger J. Jacobs T. 2009 May Bio-diesel fuel’s effects on influencing parameters of brake fuel conversion efficiency in a medium-duty diesel engine Paper presented at the ASME Internal Combustion Engine Division 2009 Spring Technical Conference, ICES 2009-76081
  12. Szybist J. Kirby S. Boehman A. 2005 NO x emissions of alternative diesel fuels: a comparative analysis of biodiesel and FT diesel Energy & Fuels 19 1484 1492
  13. Cheng A. Upatnieks A. Mueller C. 2006 Investigation of the impact of biodiesel fuelling on NO x emissions using an optical direct injection diesel engine International Journal of Engine Research 7 297 318
  14. Canakci M. 2007 Combustion characteristics of a turbocharged DI compression ignition engine fueled with petroleum diesel fuels and biodiesel Bioresource Technology 98 1167 1175
  15. Tat M. Van Gerpen J. Wang P. 2007 Fuel property effects on injection timing, ignition timing, and oxides of nitrogen emissions from biodiesel-fuelled engines Transactions of the ASABE 50 4 1123 1128
  16. Eckerle, W.A. Lyford-Pike, E.J. Stanton, D.W. LaPointe, L. et al., “Effects of Methyl Ester Biodiesel Blends on NOx Emissions,” SAE Int. J. Fuels Lubr. 1 1 102 118 2008
  17. Bauer H. 1999 nd Diesel engine management Robert Bosch GmbH Stuttgart
  18. Esquivel J. Tompkins B. Jacobs T. 2008 April The development of a diesel engine experimental research facility for biodiesel combustion studies Presented at the 2008 Technical Meeting of the Central States Section of the Combustion Institute, Tuscaloosa, Alabama
  19. Depcik C. Jacobs T. Hagena J. Assanis D. 2007 Instructional use of a single-zone, premixed charge, spark-ignition engine heat release simulation International Journal of Mechanical Engineering Education 35 1 31
  20. Krieger R. Borman G. 1966 The computation of apparent heat release for internal combustion engines ASME Papers. 66-WA/DGP-P
  21. Brunt M. Platts K. 1999 Calculation of heat release in direct injection diesel engines SAE Transactions - Journal of Engines 108
  22. Hohenberg G. 1979 Advanced approaches for heat transfer calculations SAE Transactions 88
  23. Lancaster D. Krieger R. Lienesch J. 1975 Measurement and analysis of engine pressure data SAE Transactions 84
  24. Heywood J. 1988 Properties of working fluids in Internal Combustion Engine Fundamentals McGraw-Hill Inc. New York 100 160
  25. Stivender D. 1971 June Development of a fuel-based mass emission measurement procedure SAE 710604
  26. Figliola R. Beasley D. 2000 Uncertainty analysis in Theory and Design for Mechanical Measurements John Wiley & Sons, Inc. New York 149 191
  27. Lyn W. 1963 Study of burning rate and nature of combustion in diesel engines Proceedings of the Combustion Institute 9 1069 1082
  28. Plee S. Ahmad T. 1983 Relative roles of pre-mixed and diffusion burning in diesel combustion SAE Transactions 92 831733

Cited By