Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

An Optical Study of Mixture Preparation in a Hydrogen-fueled Engine with Direct Injection Using Different Nozzle Designs

Journal Article
2009-01-2682
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2009-01-2682
Published November 02, 2009 by SAE International in United States
An Optical Study of Mixture Preparation in a Hydrogen-fueled Engine with Direct Injection Using Different Nozzle Designs
Sector:
Citation: Salazar, V. and Kaiser, S., "An Optical Study of Mixture Preparation in a Hydrogen-fueled Engine with Direct Injection Using Different Nozzle Designs," SAE Int. J. Engines 2(2):119-131, 2010, https://doi.org/10.4271/2009-01-2682.
Language: English

References

  1. Welch, A. Mumford, D. Munshi, S. Holbery, J. Boyer, B. “Challenges in Developing Hydrogen Direct Injection Technology for Internal Combustion Engines,” SAE Paper 2008-01-2379 2008
  2. Eichlseder, H. Wallner, T. Freyman, R. Ringler, J. “The Potential of Hydrogen Internal Combustion Engines in a Future Mobility Scenario,” SAE Paper 2003-01-2267 2003
  3. Rottengruber, H. Berckmüller, M. Elsässer, G. Brehm, N. Schwarz, C. “Direct Injection Hydrogen SI Engine Operation Strategy and Power Density Potentials,” SAE Paper 2004-01-2927 2004
  4. White, C. M. Steeper, R. R. Lutz, A. E. “The Hydrogen Fueled Internal Combustion Engine: A Technical Review,” Int. J. Hydrogen Energy 31 2006
  5. Wallner, T. Nande, A. M. Naber, J. “Evaluation of Injector Location and Nozzle Design in a Direct-Injection Hydrogen Research Engine,” SAE Paper 2008-01-1785 2008
  6. White, C. M. “OH* Chemiluminescence Measurements in a Direct Injection Hydrogen-Fuelled Engine,” Int. J. Engine Research 8 185 204 2007
  7. White, C. M. “A Qualitative Evaluation of Mixture Formation in a Direct-Injection Hydrogen-Fuelled Engine,” SAE Paper 2007-01-1467 2007
  8. Kaiser, S.A. White, C.M. “PIV and PLIF to Evaluate Mixture Formation in a Direct-Injection Hydrogen-Fuelled Engine,” SAE Int. J. Engines 1 1 657 668 2008
  9. Wallner, T. Nande, A.M. Naber, J.D. “Study of Basic Injection Configurations using a Direct-Injection Hydrogen Research Engine,” SAE Int. J. Engines 2 1 1221 1230 2009
  10. Salazar, V.M. Kaiser, S.A. Halter, F. “Optimizing Precision and Accuracy of Quantitative PLIF of Acetone as a Tracer for Hydrogen Fuel,” SAE Int. J. Fuels Lubr. 2 1 737 761 2009
  11. Thurber M.C. Grisch F. Kirby B.J. Votsmeier M. Hanson R.K. “Measurements and Modeling of Acetone Laser-Induced Fluorescence with Implications for Temperature-Imaging Diagnostics” Appl. Opt 37 1998
  12. Thurber M.C. Hanson R.K. “Pressure and Composition Dependences of Acetone Laser-Induced Fluorescence with Excitation at 248, 266 and 308 nm” Appl. Phys. B 69 1999
  13. Yeh C. N. Kamimoto T. Kosaka H. Kobori S. “Quantitative Measurement of 2-D Fuel Vapor Concentration in a Transient Spray Via Laser-Induced Fluorescence Technique,” SAE Paper 941953 1994
  14. Espey C. Dec J.E. Leitzinger T.A. Santavicca D.A. “Planar Laser Rayleigh Scattering for Quantitative Vapor-Fuel Imaging in a Diesel Jet” Comb. Flame 109 65 89 1997
  15. Hwang, W. Dec J.E. Sjöberg M. “Fuel Stratification for Low-Load HCCI Combustion: Performance & Fuel-PLIF Measurements” SAE Paper 2007-01-4130 2007
  16. Kirchweger, W. Haslacher, R. Hallmannsegger, M. Gerke, U. “Application of the LIF Method for the Diagnostics of the Combustion Process of Gas-IC-Engines,” Exp. Fluids 43 329 340 2007
  17. Johari, H. Paduano, R. “Dilution and Mixing in an Unsteady Jet,” Exp. Fluids 23 1997
  18. Genzale, C.L. Reitz, R.D. Musculus, M.P.B. “Effects of Piston Bowl Geometry on Mixture Development and Late-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Int. J. Engines 1 1 913 937 2008
  19. Musculus, M.P.B. Kattke, K. “Entrainment Waves in Diesel Jets,” SAE Int. J. Engines 2 1 1170 1193 2009
  20. Naber, J.D. Siebers, D.L. “Effects of gas density and vaporization on penetration and dispersion of diesel sprays,” SAE Paper 960034 1996
  21. Messner, U. Wimmer, A. Gerke, U. Gerbig, F. “Application and Validation of the 3D CFD Method for a Hydrogen Fueled IC Engine with Internal Mixture Formation,” SAE Paper 2006-01-0448 2006
  22. Petersen, B. R. “Transient High-Pressure Hydrogen Jets Measurements,” M.S. Thesis, University of Wisconsin-Madison 2006
  23. Jennigs, M.J. Jeske, F.R. “Analysis of the Injection Process in Direct Injected Natural Gas Engines: Part II- Effects of Injector and Combustion Chamber Design” ASME J. Eng. for Gas Turbines and Power 116 1994

Cited By

Recommended Content

Journal Article Development and Characteristics of a Burner for Localized Fire Tests and an Evaluation of Those Fire Tests
Technical Paper Optical Diagnostic for Diesel-Sprays with μs- Time Resolution
Technical Paper Insight on Early Spray Formation Process of a High-Pressure Swirl Injector for DISI Engines