This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Multi-Component Modeling of Evaporation, Ignition and Combustion Processes of Heavy Residual Fuel Oil
Technical Paper
2009-01-2677
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The present study introduces a multi-component model for heavy fuel oil combustion based on two component approximation, implemented into KIVA-3V using modified evaporation, ignition and combustion models. The fuel is treated as a blend of residual portion and cutter stocks. Different fuel properties are assigned to each component affecting evaporation behavior in the liquid phase as well as ignition and combustion characteristics in the vapor phase. The model was validated regarding spray and flame appearance using photographs of spray combustion in a visual constant volume combustion chamber. Further the effects of fuel component properties on the ignition and combustion properties of the fuel blend have been investigated based on rate of heat release analysis.
Recommended Content
Authors
Citation
Struckmeier, D., Tsuru, D., Kawauchi, S., and Tajima, H., "Multi-Component Modeling of Evaporation, Ignition and Combustion Processes of Heavy Residual Fuel Oil," SAE Technical Paper 2009-01-2677, 2009, https://doi.org/10.4271/2009-01-2677.Also In
References
- Struckmeier, D. Takasaki, K. Tajima, H. “Verbrennung des alternativen Marinekraftstoffs LCO in Großdieselmotoren” MTZ 69 Jahrgang
- Takasaki, K. Tajima, H. Nakashima, M. Ishida, H. Osafune, S. “Combustion characteristics of troublemaking bunker fuel oil” CIMAC Congress 2001 620 629
- Steernberg, K. “The effects of a changing oil Industry on marine fuel quality and how new and old analytical technique can be used to ensure predictable performance in marine diesel engines” CIMAC Congress 2007, Vienna, paper No. 198
- Takasaki, K. Hirata, J. Sugiura, K. Kurosawa, T. Hashimoto, T. Miyano, H. Takeda, A. Suzuki, D. Hayashi, T. Tajima, T. “Problem in the near future – Low sulfur and low grade bunker fuel” CIMAC Congress 2007, Vienna, paper No. 74
- Goldsworthy, L. “Computational fluid dynamics modelling of residual fuel oil combustion in the context of marine diesel engines” Int. J. Engine Res. 7 181 199 2006
- Pagel, S. “Verdampfungs- und Selbstzündungs-modelle für Mehrkomponenten-Gemische” Dissertation VDI-Reihe 12 Nr. 565 2004
- Rakowski, S. Merker, G. P. Spicher U. “Benzin-Verdampfung als CFD-Modell für Ottomotoren” MTZ 69 Jahrgang
- Struckmeier, D. Goldsworthy, L. Tajima, H. Kawauchi, S. Tsuru, D. “Modelling of Ignition and Combustion Characteristics of Heavy Residual Fuel Oil on Two component approximation” 7 th International Colloquium Fuels – Mineral oil based and alternative fuels 363 368 2009
- Reitz, R.D. Diwakar, R. “Structure of High-Pressure Fuel Sprays” SAE 870598 1987
- Reitz, R.D. “Modeling Atomization Processes in High-Pressure Vaporizing Sprays” Atomization and Spray Technology 3 309 337
- Taylor, G.I. “The Instability of Liquid Surfaces when Accelerated in a Direction Perpendicular to their Planes” Batchelor GK, The Scientific papers of GI Taylor 3 532 536 University Press Cambridge
- Halstead, M. P. Kirsch, L. J. Quinn, C. P. “The Autoignition of Hydrocarbon Fuels at High Temperatures and Pressures-Fitting of a Mathematical Model” Combustion and Flame 30 45 60 1977
- Kong, S.C. Han, Z.W. Reitz, R.D. “The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulations” SAE 950278 1995
- Amsden, A.A. O’Rourke, P.J. Butler, T.D. “Kiva-II: A Computer Program for Chemically Reactive Flows with Spray” Los Alamos National Laboratories New Mexico 1998
- Borman, G.L. Johnson, J.H. “Unsteady Vaporization Histories and Trajectories of Fuel Drops Injected into Swirling Air” SAE 598C
- Bartok, W. Sarofim, A. F. “Fossil Fuel Combustion-A source book” Wiley New York 1991
- Vargaftik, N. B. “Tables on the thermophysical properties of liquids and gases” Wiley New York 1975
- Maxwell, J., B. “Data book on hydrocarbons” Krieger Publishing Malabar, FL 1968
- Uehara, J. Shimizu, K. Omata, T. Hatashi, T. “Effect of asphaltene and carbon residue in marine fuel on combustion performance” CIMAC Congress 1998 Copenhagen 357 367
- Zhang, Y. Kong, S.C. Reitz, R.D. “Modeling and Simulation of a Dual Fuel (Diesel/Natural Gas) Engine With Multidimensional CFD” SAE 2003-01-0755
- Hamosfakidis, V. Reitz, R. D. “Optimization of a hydrocarbon fuel ignition model for two single component surrogates of diesel fuel” Combustion and Flame 132 433 450 2003
- Strøm, A. Tajima, H. Murakami, S. Asaura, S. “Combustibility Evaluation of Heavy Fuel Oil by Modified Fuel Ignitability Analyzer” 7 th International Symposium on Marine Engineering Tokyo 2005
- Takeda, A. Nagayuki, I. Haruo, M. Tajima, H. Hiranuma, T. Watanabe, S. Nakatani, H. Kenichi, A. Kazuo, A. “Recent Trend of Marine Residual Fuel Oil and Analysis by FCA, Constant Volume Combustion Chamber Method (IP541)” 7 th International Colloquium Fuels – Mineral oil based and alternative fuels 369 376 2009
- Struckmeier, D. Takeda, A. Tajima, H. Hiranuma, T. Watanabe, S. Tanaka, Y. “Application of Multivariable Analysis to BFO Combustibility Test using Modified FIA Vessel” 7 th International Colloquium Fuels – Mineral oil based and alternative fuels 283 290 2009
- Powell, C. F. Yue, Y. Poola, R. Wang, J. Lai, M. C. Schaller, J. “X-Ray measurements of high pressure diesel sprays” SAE 2001-01-0531