This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending

Journal Article
ISSN: 1946-3936, e-ISSN: 1946-3944
Published November 02, 2009 by SAE International in United States
Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending
Citation: Kokjohn, S., Hanson, R., Splitter, D., and Reitz, R., "Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending," SAE Int. J. Engines 2(2):24-39, 2010,
Language: English


  1. Turns, S. R. “An Introduction to Combustion: Concepts and Applications", WCB/McGraw-Hill, Boston 2000
  2. Bression, G., Soleri, D., Savy, S., Dehoux, S. et al. “A Study of Methods to Lower HC and CO Emissions in Diesel HCCI,” SAE Int. J. Fuels Lubr. 1 1 37 49 2008
  3. Hardy W. L. Reitz, R. D. “A Study of the Effects of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion" SAE Technical Paper 2006-01-0026 2006
  4. Opat, R. Ra, Y., Gonzalez D., M.A., Krieger, R., Reitz, R.D., Foster, D.E., Siewert, R., Durrett, R., “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine" SAE Technical Paper 2007-01-0193 2007
  5. Yokota, H. Kudo, Y. Nakajima, H. Kakegawa T. Suzuki, T. “A New Concept for Low Emission Diesel Combustion" SAE Technical Paper 970891 1997
  6. Sun, Y. “Diesel Combustion Optimization and Emissions Reduction Using Adaptive Injection Strategies (AIS) with Improved Numerical Models" PhD Thesis, University of Wisconsin-Madison 2007
  7. Kamimoto T. Bae, M. “High Combustion Temperature for the Reduction of Particulate in Diesel Engines" SAE Technical Paper 880423 1988
  8. Pickett L. M. Siebers, D. L. “Non-Sooting, Low Flame Temperature Mixing-Controlled Dl Diesel Combustion" SAE Technical Paper 2004-01-1399 2004
  9. Akihama, K. Takatori, Y. Inagaki, K. Sasaki S. Dean, A. M. “Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature" SAE Technical Paper 2001-01-0655 2001
  10. Liu, H. Yao, M. Zhang B. Zheng, Z. “Effects of Inlet Pressure and Octane Numbers on Combustion and Emissions of a Homogeneous Charge Compression Ignition (HCCI) Engine", Energy & Fuels 22 4 2207 2215 2008
  11. Christensen, M. Hultqvist A. Johansson, B. “Demonstrating the Multi-fuel Capability of a Homogeneous Charge Compression Ignition Engine with Variable Compression Ratio" SAE Technical Paper 1999-01-3679 1999
  12. Inagaki, K. Fuyuto, T. Nishikawa, K. Nakakita K. Sakata, I. “Dual-Fuel PCI Combustion Controlled by In-Cylinder Stratification of Ignitability" SAE Technical Paper 2006-01-0028 2006
  13. Bessonette, P. W. Schleyer, C. H. Duffy, K. P. Hardy W. L. Liechty, M. P. “Effects of Fuel Property Changes on Heavy-Duty HCCI Combustion" SAE Technical Paper 2007-01-0191 2007
  14. Nevin, R. M. Y. Sun, G. M. A. Reitz, R. D. “PCCI Investigation Using Variable Intake Valve Closing in a Heavy Duty Diesel Engine SAE Paper 2007-01-0903" 2007
  15. Sun Y. Reitz R.D. “Adaptive Injection Strategies (AIS) for Ultra-Low Emissions Diesel Engines" SAE Technical Paper 2008-01-0058 2008
  16. Amsden, A. A. “Kiva-3v, Release 2, Improvements to KIVA-3v", in LA-UR-99-915 1999
  17. Abani, N. Kokjohn, S. L. Park, S. W. Bergin, M. Munnannur, A. Ning, W. S. Y. Reitz, R. D. “An Improved Spray Model for Reducing Numerical Parameters Dependencies in Diesel Engine CFD Simulations" SAE Technical Paper 2008-01-0970 2008
  18. Abani, N. Munnannur A. Reitz, R. D. “Reduction of numerical parameter dependencies in diesel spray models" Journal of Engineering for Gas Turbines and Power 130 3 2008
  19. Han Z. Reitz, R. D. “Turbulence Modeling of Internal Combustion Engines Using RNG k-ε Models", Combustion Science and Technology 106 1995
  20. Ra Y. Reitz, R. D. “A Reduced Chemical Kinetic Model for IC Engine Combustion Simulations with Primary Reference Fuels", Combustion and Flame 155 713 738 2008
  21. Ra, Y. Yun J. E. Reitz, R. D. “Numerical parametric study of diesel engine operation with gasoline", Combustion Science and Technology 181 1 29 2008
  22. Kong, S.-C. Sun Y. Reitz, R. D. “Modeling Diesel Spray Flame Lift-off, Sooting Tendency and NOx Emissions Using Detailed Chemistry with a Phenomenological Soot model" ASME Journal of Gas Turbines and Power 129 245 251 2007
  23. Hiroyasu H. Kadota, T. “Models for Combustion and Formation of Nitric Oxide and Soot in Dl Diesel Engines" SAE Technical Paper 760129 1976
  24. Frenklach, M. Bowman, T. Smith G. Gardiner, B. 2000, .
  25. Shi, Y. Hessel, R. P. Reitz, R. D. “An Adaptive Multi-Grid Chemistry (AMC) Model for Efficient Simulation of HCCI and Dl Engine Combustion", Combustion Theory and Modeling 13 83 1040 2008
  26. Shi, Y. Kokjohn, S. L. Hai-wen, Ge, Reitz, R. D. “Efficient Multidimensional Simulation of HCCI and Dl Engine Combustion with Detailed Chemistry" SAE Technical Paper 2009-01-0701 2009
  27. Abraham, J. “What is Adequate Resolution in the Numerical Computation of Transient Jets" SAE Technical Paper 970051 1997
  28. Abraham, J. “Entrainment Characteristics of Transient jets", Numerical Heat Transfer 30 347 364 1996
  29. Beale J. C. Reitz, R. D. “Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid Model", Atomization and Sprays 9 623 650 1999
  30. A. Munnannur, "Droplet Collision Modeling in Multi-Dimensional Engine Spray Computations", PhD thesis in Mechanical Engineering, University of Wisconsin-Madison, 2007.
  31. O'Rourke P. J. Amsden, A. A. “A Particle Numerical Model for Wall Dynamics in Port-Injected Engines" SAE Technical Paper 961961 1996
  32. O'Rourke P. J. Amsden, A. A. “A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model" SAE Technical Paper 2000-01-0271 2000
  33. Kalghatgi, G. T. “Auto-ignition Quality of Practical Fuels and Implications for Fuel Requirements of Future SI and HCCI Engines" SAE Technical Paper 2005-01-0239 2005
  34. Kokjohn S. L. Reitz, R. D. “A Modeling Study of Charge Preparation in an HCCI Engine Using a Variable Pressure Pulse (VPP) Injection System and Optimized PRF Blends", 11 th International Conference on Liquid Atomization and Spray Systems 2009
  35. Kokjohn, S.L. Swor, T.A. Andrie, M.J. Reitz, R.D., “Experiments and Modeling of Adaptive Injection Strategies (AIS) in Low Emissions Diesel Engines,” SAE Int. J. Engines 2 1 16 32 2009
  36. Ando, H. Sakai Y. Kuwahara, K. “Universal Rule of Hydrocarbon Oxidation" SAE Technical Paper 2009-01-0948 2009
  37. Sjoberg, M. Dec J. E. Cernansky, N. P. “Potential of Thermal Stratification and Combustion Retard for Reducing Pressure-Rise Rates in HCCI Engines, Based on Multi-zone Modeling and Experiments" SAE Technical Paper 2005-01-0113 2005
  38. Sjoberg, M. Dec, J. “Influence of Fuel Autoignition Reactivity on the High-Load Limits of HCCI Engines,” SAE Int. J. Engines 1 1 39 58 2008

Cited By