This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Method for Torsional Damper Tuning Based On Baseline Frequency Response Functions
Technical Paper
2009-01-2152
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Based on Woodbury-Sherman-Morrison formula, a general and efficient method for torsional damper tuning is presented. This method is based on exact calculation of the resulting Frequency Response Functions (FRF's) of the system with the damper by using the original (old) FRF's of the original (baseline) system and the damper's parameters (the mass polar moment of inertia, stiffness and damping coefficient). The only requirement for this method is to have the baseline FRF's at the active points of the structure where the damper is to be attached and those point where the resulting FRF's are of interest. The baseline FRF's can be obtained by either analytical or experimental methods. Once this requirement is met, all possible scenarios of the dampers for their potential and feasibility can be efficiently evaluated before being put into service without the need for costly hardware modification and test cycles on actual structure. As such, a considerable amount of engineering time and effort can be saved.
Recommended Content
Authors
Citation
Liu, C., "A Method for Torsional Damper Tuning Based On Baseline Frequency Response Functions," SAE Technical Paper 2009-01-2152, 2009, https://doi.org/10.4271/2009-01-2152.Also In
References
- Ormondroyd J. Hartog J. P. Den The Theory of the Dynamic Vibration Absorber Transactions ASME 50 A9 1928
- Timoshenko S. P. Vibration problems in Engineering D. Van Nostrand Company, Inc. Princeton, N. J. 1937
- Timoshenko S. P. Advanced Dynamics McGraw-Hill New York 1948
- Hartog J. P. Den Mechanical Vibration McGraw-Hill Book Company, Inc. New York 1956
- Tse F. S. Morse I. E. Hinke R. T. Mechanical Vibrations, Theory and Applications Second Allyn and Bacon Boston, MA 1978
- Snowdon J. C. Vibration and Shock in Damped Mechanical Systems New York John Wiley & Sons, Inc. 1968
- Harris C. M. Crede C. E. Shock and Vibration Handbook McGraw-Hill New York 1 38 1961
- Guy K. R. Analytical & design steps for a dynamic vibration absorber Proceeding of the 13 th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2000) Houston, Texas 427 439 Dec. 3-8 2000
- Veprik A. M. Babitsky V. I. Non-linear correction of vibration projection system containing tuned dynamic absorber Journal of Sound and Vibration (united Kingdom) 239 2 335 356 Jan. 11 2001
- Gupta A. T. Mulcahy M. Hull J. R. Electronic shock absorbers Proceedings of the 21 International Modal Analysis Conference (IMAC XXI) Kissmmee, Florida, United States 181 Sept. 16-18 2002
- Song Y. et al. The response of a dynamic vibration absorber system with a parametrically excited pendulum Journal of Sound and Vibration (united Kingdom) 259 4 747 759 Jan. 2 2003
- Ewins D. J. Modal Testing: Theory, Practice and Application Wiley New York 2000
- Liu C. Q. Xiabo Liu A new method for analysis of complex structures based on FRF's of substructures Shock and Vibration 11 1 2004 1 7
- Sanliturk K. Y. “An Efficient Method for Linear and Nonlinear Structure Modifications” Proceedings of ESDA2002: 6 th Biennial Conference on Engineering Systems Design and Analysis Istanbul, Turkey July 8-11 2002
- Sanliturk K. Y. Belek H. T. “Design and Implementation of a 2-Dimensional Vibration Absorber on a Pre-Heater Tower at a Cement Factory” Proceedings of the 8 th International Congress on Sound and Vibration 2-6 July 2001 2259 2264 Hong Kong, China Cheng C. et al
- Mottershead J. E. Mares C. James S. “Fictitious Modifications for The Separation of Close Modes” Mechanical Systems and Signal Processing 16 5 741 755 2002
- Handbook of Applied Mathematics, Selected Results and methods Second Pearson Carl E. Van Nostrand Reinhold Company New York 1983 890
- Lancaster P. Tismenetsky M. The Theory of Matrices Second San Diego Academic Press 1985 64