Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Vibration Analysis of Powertrain Mounting System with a Combination of Active and Passive Isolators with Spectrally-varying Properties

Journal Article
2009-01-2034
ISSN: 1946-3995, e-ISSN: 1946-4002
DOI: https://doi.org/10.4271/2009-01-2034
Published May 19, 2009 by SAE International in United States
Vibration Analysis of Powertrain Mounting System with a Combination of Active and Passive Isolators with Spectrally-varying Properties
Sector:
Topic:
Citation: Park, J. and Singh, R., "Vibration Analysis of Powertrain Mounting System with a Combination of Active and Passive Isolators with Spectrally-varying Properties," SAE Int. J. Passeng. Cars – Mech. Syst. 2(1):1312-1322, 2009, https://doi.org/10.4271/2009-01-2034.
Language: English

References

  1. Harris C.M. Shock and Vibration Handbook McGraw-Hill New York 1995
  2. Jeong T. Singh R. “Analytical methods of decoupling the automotive engine torque roll axis” Journal of Sound and Vibration 234 85 114 2000
  3. Park J. Singh R. “Effect of non-proportional damping on the torque roll axis decoupling of an engine mounting system” Journal of Sound and Vibration 313 841 857 2008
  4. Ashrafiuon H. “Design optimization of aircraft engine mount Systems” ASME Journal of Vibration and Acoustics 115 4 463 467 1993
  5. Ashrafiuon H. Nataraj C. “Dynamic analysis of engine-mount systems” ASME Journal of Vibration and Acoustics 14 1 79 83 1992
  6. Spiekermann C.E. Radcliffe C.J. Goodman E.D. “Optimal design and simulation of vibrational isolation systems” Journal of Mechanisms Transmissions and Automation in Design 107 271 276 1985
  7. Tao J.S. Liu G.R. Lam K.Y. “Design optimization of marine engine-mount system” Journal of Sound and Vibration 235 477 494 2000
  8. Singh R. Kim G. Ravindra P.V. “Linear analysis of automotive hydro-mechanical mount with emphasis on decoupler characteristics” Journal of Sound and Vibration 158 219 243 1992
  9. Tinker M.L. Cutchins M. A. “Instabilities in a nonlinear model of a passive damper” Journal of Sound and Vibration 176 415 428 1994
  10. Rivin E.I. Passive Vibration Isolation ASME Press New York 2003
  11. Ibrahim R.A. “Recent advances in nonlinear passive vibration isolators” Journal of Sound and Vibration 314 371 452 2008
  12. Yu Y. Naganathan N.G. Dukkipati R.V. “Review of automotive vehicle engine mounting systems” International Journal of Vehicle Design 24 4 299 319 2000
  13. He S. Singh R. “Estimation of amplitude and frequency dependent parameters of hydraulic engine mount given limited dynamic stiffness measurements” Noise Control Engineering Journal 53 6 271 285 2005
  14. Jeong T. Singh R. “Inclusion of measured frequency- and amplitude-dependent mount properties in vehicle or machinery models” Journal of Sound and Vibration 245 385 415 2001
  15. Lee Y-W Lee C-W “Dynamic analysis and control of an active engine mount system” Proc. Institution of Mech. Engineers, Part D: Journal of Automobile Eng 216 921 931 2002
  16. Shibayama T. Ito K. Gami T. Oku T. Nakajima Z. Ichikawa A. “Active engine mount for a large amplitude of idling vibration” SAE, Paper # 951298 1995
  17. Gennesseaux A. “A new generation of engine mounts” SAE, Paper # 951296 1995
  18. Aoki K. Shikata T. Hyoudou Y. Hirade T. Aihara T. “Application of an active control mount (AEM) for improved diesel engine vehicle quietness” SAE, Paper # 1999-01-0832 1999
  19. Matsuoka H. Mikasa T. Nemoto H. “NV countermeasure Technology for a cylinder-on-demand engine – Development of active control engine mount” SAE, Paper # 2004-01-0413 2004
  20. Gardonio P. Elliott S.J. Pinnington R.J. “Active isolation of structural vibration on multi-degree-of-freedom system, part 1: the dynamics of the system” Journal of Sound and Vibration 207 61 93 1997
  21. Kim J-H Lee C-W “Semi-active damping control of suspension systems for specified operational response mode” Journal of Sound and Vibration 260 307 328 2003
  22. Royston T.J. Singh R. “Optimization of passive and active non-linear vibration mounting systems based on vibratory power transmission” Journal of Sound and Vibration 194 295 316 1996
  23. Hillis A.J. Harrison A.J.L. Stoten D.P. “A comparison of two adaptive algorithms for the control of active engine mounts” Journal of Sound and Vibration 286 37 54 2005
  24. Nakaji Y. Satoh S. Kimura T. Hamabe T. Akatsu Y. Kawajoe H. “Development of active control engine mount system” Vehicle System Dynamics 32 185 198 1999
  25. Kim G. Singh R. “A study of passive and adaptive hydraulic engine mount systems with emphasis on non-linear characteristics” Journal of Sound and Vibration 179 427 453 1995
  26. Gennesseaux A. “Research for new vibration isolation techniques: From hydro-mounts to active mounts” SAE, Paper # 931324 1993

Cited By

Recommended Content

Technical Paper Modeling, Design and Validation of an Exhaust Muffler for a Commercial Telehandler
Technical Paper Transverse Vibration of a Composite Shaft
Technical Paper Design of Shape for Visco-Elastic Vibration Isolation Element by Topological and Shape Optimization Methods