Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

CO Emission Model for an Integrated Diesel Engine, Emissions, and Exhaust Aftertreatment System Level Model

Journal Article
2009-01-1511
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2009-01-1511
Published April 20, 2009 by SAE International in United States
CO Emission Model for an Integrated Diesel Engine, Emissions, and Exhaust Aftertreatment System Level Model
Sector:
Citation: Bagal, N., Rutland, C., Foster, D., Narayanaswamy, K. et al., "CO Emission Model for an Integrated Diesel Engine, Emissions, and Exhaust Aftertreatment System Level Model," SAE Int. J. Engines 2(1):1460-1472, 2009, https://doi.org/10.4271/2009-01-1511.
Language: English

References

  1. Bayer J. “Zero-Dimensional Direct Injection Spray and Particulate Emission Modeling,” M.S. thesis, Department of Mechanical Engineering University of Wisconsin-Madison Madison, WI 2002
  2. Bayer J. Foster D.E. “Zero-Dimensional Soot Modeling,” SAE Paper No 2003-01-1070 2003
  3. Brahma I. Rutland C.J. Foster D.E. He Y. “A New Approach to System Level Soot Modeling,” SAE Paper No 2005-01-1122 2005
  4. Brahma I. “Data Driven System Level Modeling for Diesel Engines,” Ph.D. thesis, Department of Mechanical Engineering University of Wisconsin-Madison Madison, WI 2005
  5. England S.B. Rutland C.J. Foster D.E. He Y. “Investigation of the Effect of DPF Loading and Passive Regeneration on Engine Performance and Emissions Using an Integrated System Simulation,” SAE Paper No 2006-01-0263 2006
  6. Rutland C.J. England S.B. Foster D.E. He Y. “Integrated Engine, Emissions, and Aftertreatment System Level Models to Simulate DPF Regeneration,” SAE Paper No 2007-01-3970 2007
  7. Greeves G. Wang C.H.T. “Origins of Hydrocarbon and Carbon Monoxide Emissions from Diesel Engines,” International Federation of Automobile Techn Eng. , 00307642 779 804 1980
  8. Westbrook C.K. Dryer F.L. “Simplified Reaction Mechanisms for the Oxidation of Hydrocarbon,” Combustion Science and Technology 27 31 43 1981
  9. Aceves S.M. Flowers D.L. Chen Y.J. Babajimopoulos A. “Fast Prediction of HCCI Combustion with an Artificial Neural Network Linked to a Fluid Mechanics Code,” SAE Paper No 2006-01-3298 2006
  10. Flowers D. Aceves S. Frias J.M. Hessel R. Dibble R. “Effect of Mixing on Hydrocarbon and Carbon Monoxide Emissions Prediction for Isooctane HCCI Engine Combustion Using a Multi-Zone Detailed Kinetic Solver,” SAE Paper No 2003-01-1821 2003
  11. Aceves S.M. Flowers D.L. “A Detailed Chemical Kinetic Analysis of Low Temperature Non-Sooting Diesel Combustion,” SAE Paper No 2005-01-0923 2005
  12. Aceves S.M. Flowers D.L. Westbrook C.K. Smith J.R. Pitz W. Dibble R. Christensen M. Johansson B. “A Multi-Zone Model for Prediction of HCCI Combustion and Emissions,” SAE Paper No 2000-01-0327 2000
  13. Flowers D.L. Aceves S.M. Babajimopoulos A. “Effect of Charge Non-Uniformity on Heat Release and Emissions in PCCI Engine Combustion,” SAE Paper No 2006-01-1363 2006
  14. Kook S. Bae C. Miles P.C. Choi D. Bergin M. Reitz R.D. “The Effect of Swirl Ratio and Fuel Injection Parameters on CO Emission and Fuel Conversion Efficiency for High-Dilution, Low-Temperature Combustion in an Automotive Diesel Engine,” SAE Paper No 2006-01-0197 2006
  15. Opat R. Ra Y. Gonzalez M.A.D. Kreiger R. Reitz D. Foster D.E. Durrett R.P. Siewert M. “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine,” SAE Paper 2007-01-0193 2007
  16. Hiroyasu H. Arai M. “Structure of Fuel Sprays in Diesel Engines,” SAE Paper No 900475 1990
  17. Siewert R. “A Phenomenological Engine Model for Direct Injection of Liquid Fuels, Spray Penetration, Vaporization, Ignition Delay, and Combustion,” SAE Paper No 2007-01-0673 2007
  18. Siewert R. “Spray Angle and Rail Pressure Study for Low NOx Diesel Combustion,” SAE Paper No 2007-01-0122 2007
  19. Adomeit P. Becker M. Rohs H. Pischinger S. Greis A. Grunefeld G. “Potential Soot and CO Reduction for HSDI Diesel Combustion Systems,” SAE Paper No 2006-01-1417 2006
  20. Sjoberg M. Dec J.E. “An Investigation into Lowest Acceptable temperatures for Hydrocarbon Fuels in HCCI Engines,” Proceedings of Combustion Institute 30 2719 2726 2005
  21. Zinola S. Lavy J. Voirol A.J. “Towards CO and HC Aftertreatment Devices for the Next Generation of Diesel Engines,” SAE Paper No 2008-01-1543 2008
  22. Turns S.R. “An Introduction to Combustion,” McGraw-Hill Book Company New York 2000
  23. Warnatz J. Maas U. Dibble R.W. Combustion 4th Springer Berlin 2006
  24. Heywood J.B. Internal Combustion Engine Fundamentals McGraw-Hill Book Company New York 1988
  25. Ricardo Inc. WAVE Engine User Manual, WAVE version 7.0 2006

Cited By

Recommended Content

Journal Article Combined Effect of Oxygen Enrichment and Emulsification Techniques on Performance, Emission and Combustion of a WCO Based CI Engine
Technical Paper Thermal Conditioning of Exhaust Gas: Potential for Stabilizing Diesel Nano-Particles
Technical Paper Isotopic Tracing of Bio-Derived Carbon from Ethanol-in-Diesel Blends in the Emissions of a Diesel Engine