This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical Investigation of the Sensitivity of the Performance Criteria of an Automotive Cyclone Particle Separator to CFD Modeling Parameters
Technical Paper
2009-01-1176
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Predicting the optimum performance parameters of an automotive cyclone particle separator (separation efficiency and pressure drop) using computational fluid dynamics by varying its geometrical parameters is challenging and a time consuming process due to the highly swirling nature of the flow. This study presents results of three investigations of the performance and design of a cyclone separator: a sensitivity analysis, deterministic optimization and a reliability based design optimization. All three cases involved variation of four geometric parameters that characterize the design of the cyclone.
Recommended Content
Topic
Citation
Hineiti, N. and Guessous, L., "Numerical Investigation of the Sensitivity of the Performance Criteria of an Automotive Cyclone Particle Separator to CFD Modeling Parameters," SAE Technical Paper 2009-01-1176, 2009, https://doi.org/10.4271/2009-01-1176.Also In
Reliability and Robust Design in Automotive Engineering, 2009
Number: SP-2232; Published: 2009-04-20
Number: SP-2232; Published: 2009-04-20
References
- Numerical investigation of the grid, turbulence model and discretization sensitivity of an automotive cyclone particle separator Hineiti, Naser Guessous. Laila Boston, Massachusetts 2008 ASME International Mechanical Engineering Congress and Exposition 2008
- Numerical Investigation of Transient Flow Effects on the Separation Parameters of a Reverse Flow Type Cyclone Particle Separator Hineiti, Naser Guessous. Laila Detroit, MI SAE World Congress April 2008
- Cheremisinoff, Nicholas P. Gupta, Ramesh Handbook of Fluids in Motion Nicholas P. Cheremisinoff & Ramesh Gupta. s.l. Butterworths 1983 847 860
- Ways To Meet Future Emission Standards with Diesel Engine Powered Sport Utility Vehicles (SUV) Zelenka, P. Egert, M. Cartellieri, W. SAE International 2000 SAE 2000-01-0181
- DoE Based CFD Analysis of Diesel Combustion and Pollutant Formation Tatschl, R. Priesching, P. Ruetz, J. Kammerdiener Th. ICE2007 8TH International Conference ‘Engines for Automobiles” 2007
- Steady and Transient CFD Approach for Port Optimization Surendra, Gaikwad Kunal, Arora Vamshi, Korivi Cho Su K. Warrendale, Pennsylvania, USA SAE International, SAE 2008
- Topology and Shape Optimization Methods for CFD Problems Häußler, Pascal Nitsopoulos, Ioannis Sauter, Jürgen Stephan Markus Schwabenlandhalle Stuttgart/Fellbach, Germany 24th CADFEM Users’ Meeting 2006
- Simulation-Based Design Optimization Methodologies Applied to CFD Parry, John Bornoff, Robin B. Stehouwer, Peter Driessen, Lonneke T. Stinstra Erwin IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES JUNE 2004 27 NO. 2
- Faragher, John. Probabilistic Methods for the Quantification of Uncertainty and Error in Computational Fluid Dynamics Simulations Fishermans Bend, Victoria 3207 Australia: DSTO Platforms Sciences Laboratory October 2004
- Optimizing hydrocyclone design using advanced CFD model Olson, T.J. Van Ommen. R. 713 720 MINERALS ENGINEERING 2004 17 No. 5
- Saltelli, A. Ratto, M. Andres, T. Campolongo, F. Cariboni, J. Gatelli, D. Saisana, M. Tarantola, S. Global Sensitivity Analysis The Primer, John Wiley & Sons 2008
- A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer Code McKay, M.D. Conover, W.J. Beckman, R.J. 21 2 239 245 Technometrics
- Review of Metamodeling Techniques in Support of Engineering Design Optimization Wang, G.G. Shan, S. ASME 2006 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference September 2006
- Statistical Approximations for Multidisciplinary Design Optimization: The Problem of Size,” Koch, P. N. Simpson, T. W. Allen, J. K. Mistree, F. Journal of Aircraft 1999 36 1 275 286
- Prediction of Tire-Snow Interaction Forces Using Metamodeling Li Jing Mourelatos, Zissimos P. Lee Jonah H. Liu Qing Detroit Proceedings of SAE World Congress April 2007
- Optimization of HVAC Temperature Regulation Curves with modeFrontier and Fluent Chen, Yang Stephenson, Philip Elankumaran Kanthasamy Detroit, Michigan 2007 World Congress April 16–19 2007
- Multiquadratic equation of topography and other irregular surfaces Hardy, R. L. J. Geophys. Res 1971 76 1905 1915
- Comparative Studies of Metamodeling Techniques Under Multiple Modeling Criteria Jin, R. Chen, W. Simpson, T. W. 23 No. 1 1 13 Journal of Structural Optimization 2001
- Computationally inexpensive metamodel assessment strategies Meckesheimer, M. Barton, R.R. Simpson, T.W. Booker, A. Pittsburgh, PA. Proceedings of the ASME Design Technical Conferences-Design Automation Conference 2001
- RESEARCH ISSUES IN METAMODELING. Sargent, Robert G. Phoenix, Arizona United States Proceedings of the 23rd conference on Winter simulation Decembe 1991 888 893
- Phadke, Madhav S. Quality Engineering Using Robust Design, US Ed edition New Jersy Prentice Hall PTR 1989
- Software, Engineous Engineous Software July 2005
- An Efficient Unified Approach for Reliability and Robustness in Engineering Design Mourelatos, Zissimos P. Liang, Jinghong Philadelphia, Pennsylvania 2006 ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES & COMPUTERS IN ENGINEERING CONFERENCE 2006
- Burkholz, Armin Droplet separation New York, NY (USA) John Wiley & Sons Inc 1990