This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Dedicated EGR: A New Concept in High Efficiency Engines
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 20, 2009 by SAE International in United States
Citation: Alger, T. and Mangold, B., "Dedicated EGR: A New Concept in High Efficiency Engines," SAE Int. J. Engines 2(1):620-631, 2009, https://doi.org/10.4271/2009-01-0694.
The use of high levels of EGR has been documented to increase fuel efficiency and reduce emissions of spark ignition engines [1–5]. However, these engines typically face challenges in EGR control and tolerance, which can reduce the expected efficiency improvement. A concept developed by Southwest Research Institute explores the potential of an engine with individual cylinders dedicated to EGR production to overcome the challenges associated with EGR tolerance and control. In this study, a 4-cylinder engine was run with cylinder 1 exhausting directly to the intake manifold, leading to a constant 25% EGR level. The engine was run naturally aspirated over a large portion of the performance map at an ultra-high (14:1) compression ratio. As a part of the study, air-to-fuel ratio in cylinder 1 was varied from stoichiometric to rich to determine the effect of the products of partial combustion on EGR tolerance and fuel consumption. The results show that this concept results in large gains in fuel efficiency over the baseline, low compression ratio engine and significantly reduces the exhaust emissions from the other 3 cylinders.